syscall/README.txt
==================
This directory supports a syscall layer from communication between a
monolithic, kernel-mode NuttX kernel and a separately built, user-mode
application set.
With most MCUs, NuttX is built as a flat, single executable image
containing the NuttX RTOS along with all application code. The RTOS code
and the application run in the same address space and at the same kernel-
mode privileges. In order to exploit security features of certain
processors, an alternative build model is also supported: NuttX can
be built separately as a monolithic, kernel-mode module and the applications
can be added as a separately built, user-mode module.
The syscall layer provided in this directory serves as the communication
layer from the user-mode application into the kernel-mode RTOS. The
switch from user-mode to kernel-mode is accomplished using software
interrupts (SWIs). SWIs are implemented differently and named differently
by different manufacturers but all work essentially the same: A special
instruction is executed in user-mode that causes a software generated
interrupt. The software generated interrupt is caught within the kernel
and handle in kernel-mode.
Header Files
============
include/syscall.h
This header file supports general access to SWI facilities. It is simply
a wrapper file that includes include/sys/syscall.h and
include/arch/syscall.h.
include/sys/syscall.h
The SWIs received by the kernel are distinguish by a code that identifies
how to process the SWI. This header file defines all such codes understood
by the NuttX kernel.
include/arch/syscall.h (or arch/<cpu>/include/syscall.h)
This header file is provided by the platform-specific logic and declares
(or defines) the mechanism for providing software interrupts on this
platform. The following functions must be declared (or defined) in this
header file:
- SWI with SYS_ call number and one parameter
uintptr_t sys_call0(unsigned int nbr);
- SWI with SYS_ call number and one parameter
uintptr_t sys_call1(unsigned int nbr, uintptr_t parm1);
- SWI with SYS_ call number and two parameters
uintptr_t sys_call2(unsigned int nbr, uintptr_t parm1, uintptr_t parm2);
- SWI with SYS_ call number and three parameters
uintptr_t sys_call3(unsigned int nbr, uintptr_t parm1,
uintptr_t parm2, uintptr_t parm3);
- SWI with SYS_ call number and four parameters
uintptr_t sys_call4(unsigned int nbr, uintptr_t parm1, uintptr_t parm2,
uintptr_t parm3, uintptr_t parm4);
- SWI with SYS_ call number and five parameters
uintptr_t sys_call5(unsigned int nbr, uintptr_t parm1, uintptr_t parm2,
uintptr_t parm3, uintptr_t parm4, uintptr_t parm5);
- SWI with SYS_ call number and six parameters
uintptr_t sys_call6(unsigned int nbr, uintptr_t parm1, uintptr_t parm2,
uintptr_t parm3, uintptr_t parm4, uintptr_t parm5,
uintptr_t parm6);
Syscall Database
================
Sycall information is maintained in a database. That "database" is
implemented as a simple comma-separated-value file, syscall.csv. Most
spreadsheets programs will accept this format and can be used to maintain
the syscall database.
The format of the CSV file for each line is:
Field 1: Function name
Field 2: The header file that contains the function prototype
Field 3: Condition for compilation
Field 4: The type of function return value.
Field 5 - N+5: The type of each of the N formal parameters of the function
Fields N+5 - : If the last parameter is "...", then the following fields
provide the type and number of of possible optional parameters.
See note below about variadic functions
Each type field has a format as follows:
type name:
For all simpler types
formal type | actual type:
For array types where the form of the formal (eg. int parm[2])
differs from the type of actual passed parameter (eg. int*). This
is necessary because you cannot do simple casts to array types.
formal type | union member actual type | union member fieldname:
A similar situation exists for unions. For example, the formal
parameter type union sigval -- You cannot cast a uintptr_t to
a union sigval, but you can cast to the type of one of the union
member types when passing the actual parameter. Similarly, we
cannot cast a union sigval to a uinptr_t either. Rather, we need
to cast a specific union member fieldname to uintptr_t.
Variadic Functions:
General variadic functions which may have an arbitrary number of argument
or arbitrary types cannot be represented as system calls. syslog() is a
good example. Normally you would work around this by using the non-
variadic form of the OS interface that accepts a va_list as an argument,
vsyslog() in this case.
There there are many functions that have a variadic form but take only
one or two arguments optional arguments. There can be handled as system
calls, but only by treating them as though they had a fixed number of
arguments.
These are are handled in syscall.csv by appending the number and type of
optional arguments. For example, consider the open() OS interface. Its
prototype is:
int open(const char *path, int oflag, ...);
In reality, open may take only a single optional argument of type mode_t
and is represented in syscall.cvs like this:
"open","fcntl.h","","int","const char*","int","...","mode_t"
The existence of the "mode_t" tells tools/mksyscall that there is at most
one optional parameter and, if present, it is of type mode_t.
NOTE: This CSV file is used both to support the generate of trap information,
but also for the generation of symbol tables. See nuttx/tools/README.txt
and nuttx/lib/README.txt for further information.
Auto-Generated Files
====================
Stubs and proxies for the sycalls are automatically generated from this CSV
database. Here the following definition is used:
Proxy - A tiny bit of code that executes in the user space. A proxy
has exactly the same function prototype as does the "real" function
for which it proxies. However, it only serves to map the function
call into a syscall, marshaling all of the system call parameters
as necessary.
Stub - Another tiny bit of code that executes within the NuttX kernel
that is used to map a software interrupt received by the kernel to
a kernel function call. The stubs receive the marshaled system
call data, and perform the actually kernel function call (in
kernel-mode) on behalf of the proxy function.
Sub-Directories
===============
stubs - Autogenerated stub files are placed in this directory.
proxies - Autogenerated proxy files are placed in this directory.
mksyscall
=========
mksyscall is C program that is used used during the initial NuttX build
by the logic in the top-level syscall/ directory. Information about the
stubs and proxies is maintained in a comma separated value (CSV) file
in the syscall/ directory. The mksyscall program will accept this CVS
file as input and generate all of the required proxy or stub files as
output. See tools/README.txt for additional information.
4f1319f4f2