nuttx

History

patacongo 1089a67db5 Add buildroot support for binutils-2.22 and gcc-4.6.3; all buildroot tools are not called abc-nuttx-elf instead of abc-elf git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5213 42af7a65-404d-4744-a932-0658087f49c3		2012-10-05 23:01:51 +00:00
..
appconfig	More support for the Shenzhou board	2012-09-07 23:34:16 +00:00
bigfatstub.c	Remove executable property from source and make files	2012-09-13 18:46:10 +00:00
defconfig	Change all occurrences of CONFIG_EXAMPLE_ to CONFIG_EXAMPLES_ for consistency; fleshed out a few more Kconfig files	2012-10-04 17:36:07 +00:00
Make.defs	Add buildroot support for binutils-2.22 and gcc-4.6.3; all buildroot tools are not called abc-nuttx-elf instead of abc-elf	2012-10-05 23:01:51 +00:00
nuttx.ctx	Basic USART setup works	2009-10-11 19:52:20 +00:00
nuttx.dbi	Don't discard unused sections	2009-10-11 15:16:03 +00:00
nuttx.elf.ld	Don't discard unused sections	2009-10-11 15:16:03 +00:00
nuttx.rapp	Name change: Change Cortex-M3 naming to ARMv7-M naming so support Cortex-M4	2011-08-05 21:57:49 +00:00
nuttx.rdb	Move serial header files to include/nuttx/serial	2012-03-21 19:47:23 +00:00
nuttx.rprj	Started a RIDE project for STM32	2009-10-04 17:48:35 +00:00
README.txt	Remove executable property from source and make files	2012-09-13 18:46:10 +00:00
setenv.sh	More support for the Shenzhou board	2012-09-07 23:34:16 +00:00
stm32-ld.sh	Don't discard unused sections	2009-10-11 15:16:03 +00:00
stm32-nuttx.ld	More support for the Shenzhou board	2012-09-07 23:34:16 +00:00

README.txt

README
------

This directory contains a simple RIDE7 project used to bring up the
STM3210E-EVAL board.  This project includes only the STM32 boot-up
code under arch/arm/src and configs/stm3210e-eval/src plus as little
additional environmental support as necessary.

bigfatstub.c

  The NuttX OS is not included in this project.  This file contains
  stubs for all of the NuttX entry points and this replaces NuttX

Make.defs, defconfig, setenv.h

  The first step to using this RIDE project is to build a compatible
  cygwin project.  This will set up of the directories and produce
  all of the necessary autogenerated files.

    cd tools
    ./configure.sh stm3210e-eva/RIDE
    cd ..
    . ./setenv.sh
    make

nuttx.*

  RIDE7 project files
  
stm32-nuttx.ld

  This is the linker script that replaces the RIDE7 linker script.

stm32-ld.sh

  This is a shell script that will use the RIDE7 tools to relink the
  NuttX binaries.  Useful because RIDE7 does not provide much linker
  output to see what is going on.