sergiotarxz/nuttx
sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
nuttx/configs/nucleo-l476rg/src/nucleo-l476rg.h

421 lines
14 KiB
C
Raw Blame History

/************************************************************************************
* configs/nucleo-l476rg/src/nucleo-l476rg.h
*
* Copyright (C) 2014, 2016, 2018 Gregory Nutt. All rights reserved.
* Authors: Frank Bennett
* Gregory Nutt <gnutt@nuttx.org>
* Sebastien Lorquet <sebastien@lorquet.fr>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
************************************************************************************/
#ifndef __CONFIGS_NUCLEO_L476RG_SRC_NUCLEO_L476RG_H
#define __CONFIGS_NUCLEO_L476RG_SRC_NUCLEO_L476RG_H
/************************************************************************************
* Included Files
************************************************************************************/
#include <nuttx/config.h>
#include <nuttx/compiler.h>
#include <stdint.h>
/************************************************************************************
* Pre-processor Definitions
************************************************************************************/
/* Configuration ********************************************************************/
#define HAVE_PROC 1
#define HAVE_RTC_DRIVER 1
#define HAVE_MMCSD_SPI 1
#define HAVE_MMCSD_SDIO 1
#if !defined(CONFIG_FS_PROCFS)
# undef HAVE_PROC
#endif
#if defined(HAVE_PROC) && defined(CONFIG_DISABLE_MOUNTPOINT)
# warning Mountpoints disabled. No procfs support
# undef HAVE_PROC
#endif
/* Check if we can support the RTC driver */
#if !defined(CONFIG_RTC) || !defined(CONFIG_RTC_DRIVER)
# undef HAVE_RTC_DRIVER
#endif
#if !defined(CONFIG_STM32L4_SPI1) || !defined(CONFIG_MMCSD) || \
!defined(CONFIG_MMCSD_SPI)
# undef HAVE_MMCSD_SPI
#endif
#if !defined(CONFIG_STM32L4_SDIO) || !defined(CONFIG_MMCSD) || \
!defined(CONFIG_MMCSD_SDIO)
# undef HAVE_MMCSD_SDIO
#endif
/* LED. User LD2: the green LED is a user LED connected to Arduino signal D13
* corresponding to MCU I/O PA5 (pin 21) or PB13 (pin 34) depending on the STM32
* target.
*
* - When the I/O is HIGH value, the LED is on.
* - When the I/O is LOW, the LED is off.
*/
#define GPIO_LD2 \
(GPIO_PORTA | GPIO_PIN5 | GPIO_OUTPUT_CLEAR | GPIO_OUTPUT | GPIO_PULLUP | \
GPIO_SPEED_50MHz)
/* Buttons
*
* B1 USER: the user button is connected to the I/O PC13 (pin 2) of the STM32
* microcontroller.
*/
#define MIN_IRQBUTTON BUTTON_USER
#define MAX_IRQBUTTON BUTTON_USER
#define NUM_IRQBUTTONS 1
#define GPIO_BTN_USER \
(GPIO_INPUT |GPIO_FLOAT |GPIO_EXTI | GPIO_PORTC | GPIO_PIN13)
/* The shield uses the following pins:
*
* +5V
* GND
* SERIAL_TX=PA_2 USER_BUTTON=PC_13
* SERIAL_RX=PA_3 LD2=PA_5
*
* Analog Digital
* A0=PA_0 USART2RX D0=PA_3 D8 =PA_9
* A1=PA_1 USART2TX D1=PA_2 D9 =PC_7
* A2=PA_4 D2=PA_10 WIFI_CS=D10=PB_6 SPI_CS
* A3=PB_0 WIFI_INT=D3=PB_3 D11=PA_7 SPI_MOSI
* A4=PC_1 SD_CS=D4=PB_5 D12=PA_6 SPI_MISO
* A5=PC_0 WIFI_EN=D5=PB_4 LD2=D13=PA_5 SPI_SCK
* LED2=D6=PB_10 I2C1_SDA=D14=PB_9 WIFI Probe
* D7=PA_8 I2C1_SCL=D15=PB_8 WIFI Probe
*
* mostly from: https://mbed.org/platforms/ST-Nucleo-F401RE/
*/
#ifdef CONFIG_WL_CC1101
# define GPIO_CC1101_PWR (GPIO_PORTC | GPIO_PIN6 | GPIO_OUTPUT_SET | \
GPIO_OUTPUT | GPIO_PULLUP | GPIO_SPEED_50MHz)
# define GPIO_CC1101_CS (GPIO_PORTB | GPIO_PIN12 | GPIO_OUTPUT_SET | \
GPIO_OUTPUT | GPIO_PULLUP | GPIO_SPEED_50MHz)
# define GPIO_CC1101_MISO (GPIO_PORTB | GPIO_PIN14)
# define GPIO_CC1101_GDO2 (GPIO_PORTC | GPIO_PIN10 | \
GPIO_EXTI | GPIO_SPEED_50MHz)
#endif
/* SPI chip selects */
#ifdef CONFIG_MMCSD_SPI
# define GPIO_SPI_CS_SD_CARD \
(GPIO_OUTPUT | GPIO_PUSHPULL | GPIO_SPEED_50MHz | \
GPIO_OUTPUT_SET | GPIO_PORTB | GPIO_PIN10)
#endif
#ifdef CONFIG_LCD_PCD8544
#define STM32_LCD_CS (GPIO_OUTPUT|GPIO_PULLUP|GPIO_SPEED_2MHz|\
GPIO_OUTPUT_SET|GPIO_PORTC|GPIO_PIN4)
#define STM32_LCD_CD (GPIO_OUTPUT|GPIO_PULLUP|GPIO_SPEED_2MHz|\
GPIO_OUTPUT_SET|GPIO_PORTA|GPIO_PIN10)
#define STM32_LCD_RST (GPIO_OUTPUT|GPIO_PULLUP|GPIO_SPEED_2MHz|\
GPIO_OUTPUT_SET|GPIO_PORTB|GPIO_PIN13)
#endif
/* Devices on the onboard bus.
*
* Note that these are unshifted addresses.
*/
#define NUCLEO_I2C_OBDEV_LED 0x55
#define NUCLEO_I2C_OBDEV_HMC5883 0x1e
/* User GPIOs
*
* GPIO0-1 are for probing WIFI status
*/
/* Itead Joystick Shield
*
* See http://imall.iteadstudio.com/im120417014.html for more information
* about this joystick.
*
* --------- ----------------- ---------------------------------
* ARDUINO ITEAD NUCLEO-F4x1
* PIN NAME SIGNAL SIGNAL
* --------- ----------------- ---------------------------------
* D3 Button E Output PB3
* D4 Button D Output PB5
* D5 Button C Output PB4
* D6 Button B Output PB10
* D7 Button A Output PA8
* D8 Button F Output PA9
* D9 Button G Output PC7
* A0 Joystick Y Output PA0 ADC1_0
* A1 Joystick X Output PA1 ADC1_1
* --------- ----------------- ---------------------------------
*
* All buttons are pulled on the shield. A sensed low value indicates
* when the button is pressed.
*
* NOTE: Button F cannot be used with the default USART1 configuration
* because PA9 is configured for USART1_RX by default. Use select
* different USART1 pins in the board.h file or select a different
* USART or select CONFIG_NUCLEO_L476RG_AJOY_MINBUTTONS which will
* eliminate all but buttons A, B, and C.
*/
#define ADC_XOUPUT 1 /* X output is on ADC channel 1 */
#define ADC_YOUPUT 0 /* Y output is on ADC channel 0 */
#define GPIO_BUTTON_A \
(GPIO_INPUT | GPIO_PULLUP |GPIO_EXTI | GPIO_PORTA | GPIO_PIN8)
#define GPIO_BUTTON_B \
(GPIO_INPUT | GPIO_PULLUP |GPIO_EXTI | GPIO_PORTB | GPIO_PIN10)
#define GPIO_BUTTON_C \
(GPIO_INPUT | GPIO_PULLUP |GPIO_EXTI | GPIO_PORTB | GPIO_PIN4)
#define GPIO_BUTTON_D \
(GPIO_INPUT | GPIO_PULLUP |GPIO_EXTI | GPIO_PORTB | GPIO_PIN5)
#define GPIO_BUTTON_E \
(GPIO_INPUT | GPIO_PULLUP |GPIO_EXTI | GPIO_PORTB | GPIO_PIN3)
#define GPIO_BUTTON_F \
(GPIO_INPUT | GPIO_PULLUP |GPIO_EXTI | GPIO_PORTA | GPIO_PIN9)
#define GPIO_BUTTON_G \
(GPIO_INPUT | GPIO_PULLUP |GPIO_EXTI | GPIO_PORTC | GPIO_PIN7)
/* Itead Joystick Signal interpretation:
*
* --------- ----------------------- ---------------------------
* BUTTON TYPE NUTTX ALIAS
* --------- ----------------------- ---------------------------
* Button A Large button A JUMP/BUTTON 3
* Button B Large button B FIRE/BUTTON 2
* Button C Joystick select button SELECT/BUTTON 1
* Button D Tiny Button D BUTTON 6
* Button E Tiny Button E BUTTON 7
* Button F Large Button F BUTTON 4
* Button G Large Button G BUTTON 5
* --------- ----------------------- ---------------------------
*/
#define GPIO_BUTTON_1 GPIO_BUTTON_C
#define GPIO_BUTTON_2 GPIO_BUTTON_B
#define GPIO_BUTTON_3 GPIO_BUTTON_A
#define GPIO_BUTTON_4 GPIO_BUTTON_F
#define GPIO_BUTTON_5 GPIO_BUTTON_G
#define GPIO_BUTTON_6 GPIO_BUTTON_D
#define GPIO_BUTTON_7 GPIO_BUTTON_E
#define GPIO_SELECT GPIO_BUTTON_1
#define GPIO_FIRE GPIO_BUTTON_2
#define GPIO_JUMP GPIO_BUTTON_3
/* GPIO pins used by the GPIO Subsystem
* Added by: Ben vd Veen (DisruptiveNL) -- www.nuttx.nl
*/
#define BOARD_NGPIOIN 1 /* Amount of GPIO Input pins */
#define BOARD_NGPIOOUT 1 /* Amount of GPIO Output pins */
#define BOARD_NGPIOINT 1 /* Amount of GPIO Input w/ Interruption pins */
/* This was really something to find out! But the GPIOA Port was causing
* conflicts with the nsh console. So thats why I have chosen GPIOB
*
* Author: Ben vd Veen (DisruptiveNL) -- www.nuttx.nl
* https://www.youtube.com/watch?v=VXsTLzI6idA -- Original video GPIO
*/
#define GPIO_IN1 (GPIO_INPUT | GPIO_FLOAT | GPIO_PORTB | GPIO_PIN0)
#define GPIO_OUT1 (GPIO_OUTPUT | GPIO_OUTPUT | GPIO_SPEED_50MHz | \
GPIO_OUTPUT_SET | GPIO_PORTB | GPIO_PIN1)
#define GPIO_INT1 (GPIO_INPUT | GPIO_FLOAT | GPIO_PORTB | GPIO_PIN2)
/************************************************************************************
* Public Data
************************************************************************************/
/* Global driver instances */
#ifdef CONFIG_STM32L4_SPI1
extern struct spi_dev_s *g_spi1;
#endif
#ifdef CONFIG_STM32L4_SPI2
extern struct spi_dev_s *g_spi2;
#endif
#ifdef HAVE_MMCSD_SDIO
extern struct sdio_dev_s *g_sdio;
#endif
/************************************************************************************
* Public Functions
************************************************************************************/
/************************************************************************************
* Name: stm32l4_spiinitialize
*
* Description:
* Called to configure SPI chip select GPIO pins.
*
************************************************************************************/
void stm32l4_spiinitialize(void);
/************************************************************************************
* Name: stm32l4_usbinitialize
*
* Description:
* Called to setup USB-related GPIO pins.
*
************************************************************************************/
void stm32l4_usbinitialize(void);
/****************************************************************************
* Name: stm32_gpio_initialize
*
* Description:
* Initialize GPIO drivers for use with /apps/examples/gpio
* Added by: Ben vd Veen (DisruptiveNL) -- www.nuttx.nl
*
****************************************************************************/
#ifdef CONFIG_DEV_GPIO
int stm32l4_gpio_initialize(void);
#endif
/************************************************************************************
* Name: stm32l4_can_setup -- DisruptiveNL
*
* Description:
* Initialize CAN and register the CAN device.
* Added by: Ben vd Veen (DisruptiveNL) -- www.nuttx.nl
*
************************************************************************************/
#ifdef CONFIG_CAN
int stm32l4_can_setup(void);
#endif
/************************************************************************************
* Name: stm32l4_pwm_setup
*
* Description:
* Initialize PWM and register the PWM device.
*
************************************************************************************/
#ifdef CONFIG_PWM
int stm32l4_pwm_setup(void);
#endif
/************************************************************************************
* Name: stm32l4_adc_setup
*
* Description:
* Initialize ADC and register the ADC driver.
*
************************************************************************************/
#ifdef CONFIG_ADC
int stm32l4_adc_setup(void);
#endif
/****************************************************************************
* Name: board_ajoy_initialize
*
* Description:
* Initialize and register the button joystick driver
*
****************************************************************************/
#ifdef CONFIG_AJOYSTICK
int board_ajoy_initialize(void);
#endif
/****************************************************************************
* Name: stm32l4_mmcsd_initialize
*
* Description:
* Initializes SPI-based SD card
*
****************************************************************************/
#ifdef CONFIG_MMCSD_SPI
int stm32l4_mmcsd_initialize(int minor);
#endif
/****************************************************************************
* Name: board_timer_driver_initialize
*
* Description:
* Initialize and register a timer
*
****************************************************************************/
#ifdef CONFIG_TIMER
int board_timer_driver_initialize(FAR const char *devpath, int timer);
#endif
/****************************************************************************
* Name: stm32l4_qencoder_initialize
*
* Description:
* Initialize and register a qencoder
*
****************************************************************************/
#ifdef CONFIG_SENSORS_QENCODER
int stm32l4_qencoder_initialize(FAR const char *devpath, int timer);
#endif
/****************************************************************************
* Name: stm32_cc1101_initialize
*
* Description:
* Initialize and register the cc1101 radio driver
*
****************************************************************************/
#ifdef CONFIG_WL_CC1101
int stm32_cc1101_initialize(void);
#endif
#endif /* __CONFIGS_NUCLEO_L476RG_SRC_NUCLEO_L476RG_H */
Reference in New Issue View Git Blame Copy Permalink