nuttx/boards/arm/lpc43xx/lpc4370-link2/src/lpc43_spifilib_init.c
Gregory Nutt 037c9ea0a4 arch/arm: Rename all up_*.h files to arm_*.h
Summary

The naming standard at https://cwiki.apache.org/confluence/display/NUTTX/Naming+FAQ requires that all MCU-private files begin with the name of the architecture, not up_.

This PR addresses only these name changes for the up_*.h files.  There are only three, but almost 1680 files that include them:

    up_arch.h
    up_internal.h
    up_vfork.h

The only change to the files is from including up_arch.h to arm_arch.h (for example).

The entire job required to be compatible with that Naming Convention will also require changing the naming of the up_() functions that are used only within arch/arm and board/arm.

Impact

There should be not impact of this change (other that one step toward more consistent naming).

Testing

stm32f4discovery:netnsh
2020-05-01 03:43:44 +01:00

132 lines
4.4 KiB
C

/****************************************************************************
* boards/arm/lpc43xx/lpc4370-link2/src/lpc43_spifilib_init.c
*
* Copyright (C) 2015-2016 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <stdint.h>
#include <stdbool.h>
#include <debug.h>
#include <nuttx/irq.h>
#include <nuttx/board.h>
#include <arch/board/board.h>
#include "chip.h"
#include "arm_arch.h"
#include "arm_internal.h"
#include "lpc43_spifi.h"
#include "lpc43_cgu.h"
#include "lpc4370-link2.h"
#include "spifi/inc/spifilib_api.h"
#ifdef CONFIG_SPIFI_LIBRARY
/****************************************************************************
* Private Data
****************************************************************************/
/* Local memory, 32-bit aligned that will be used for driver context
* (handle).
*/
static uint32_t lmem[21];
/****************************************************************************
* Public Functions
****************************************************************************/
void board_spifi_initialize(void)
{
irqstate_t flags = enter_critical_section();
uint32_t regval;
flags = enter_critical_section();
/* Initial frequency is set by boot ROM in IDIVE */
/* Pin configuration */
lpc43_pin_config(PINCONF_SPIFI_CS);
lpc43_pin_config(PINCONF_SPIFI_MISO);
lpc43_pin_config(PINCONF_SPIFI_MOSI);
lpc43_pin_config(PINCONF_SPIFI_SCK);
lpc43_pin_config(PINCONF_SPIFI_SIO2);
lpc43_pin_config(PINCONF_SPIFI_SIO3);
/* Initialize LPCSPIFILIB library, reset the interface */
spifiInit(LPC43_SPIFI_CTRL, true);
/* Register the family for the device */
spifiRegisterFamily(spifi_REG_FAMILY_CommonCommandSet);
/* Initialize and detect a device and get device context */
SPIFI_HANDLE_T* pSpifi = spifiInitDevice(&lmem, sizeof(lmem),
LPC43_SPIFI_CTRL,
LPC43_LOCSRAM_SPIFI_BASE);
/* Enable quad. If not supported it will be ignored */
spifiDevSetOpts(pSpifi, SPIFI_OPT_USE_QUAD, true);
/* Enter memMode */
spifiDevSetMemMode(pSpifi, true);
/* Configure divider as the input to the SPIFI */
regval = getreg32(LPC43_BASE_SPIFI_CLK);
regval &= ~BASE_SPIFI_CLK_CLKSEL_MASK;
regval |= BASE_SPIFI_CLKSEL_IDIVE;
putreg32(regval, LPC43_BASE_SPIFI_CLK);
regval = getreg32(LPC43_IDIVE_CTRL);
regval &= ~(IDIVE_CTRL_CLKSEL_MASK | IDIVE_CTRL_IDIV_MASK);
regval |= BASE_SPIFI_CLKSEL_PLL1 | IDIVE_CTRL_AUTOBLOCK |
IDIVE_CTRL_IDIV(SPIFI_DEVICE_REQUENCY_DIVIDER);
putreg32(regval, LPC43_IDIVE_CTRL);
leave_critical_section(flags);
}
#endif /* CONFIG_SPIFI_LIBRARY */