liuguo09 14a2db7ffa boards/mips/pic32mx: Add pinguino-debug.ld for PIC32MX boards (#138) ... Add pinguino-debug.ld for PIC32MX boards to fix build break under PINGUINO gcc toolchain. All pinguino-debug.ld copy from the original mips debug/release ld scripts. Change-Id: Ie47a2523470cc9996d007bc4afbf9cb40e51ae5b Signed-off-by: liuhaitao <liuhaitao@xiaomi.com>		2020-01-21 12:48:25 +01:00
..
c32-debug.ld	boards/mips Linker Scripts: The PIC32M* start-up code initializes .bss by writing 16 bytes at a time in a loop. The start (_sbss) alignment is only required to be 4 bytes since the write is done with 4 store instructions. In a previous change, the end address, _ebss, was aligned to 16 byte to prevent initializing past the end off the .bss region. However, that does not work unless the start address, _sbss, is also aligned to 16 bytes.	2019-09-16 08:14:32 -06:00
c32-release.ld	boards/mips Linker Scripts: The PIC32M* start-up code initializes .bss by writing 16 bytes at a time in a loop. The start (_sbss) alignment is only required to be 4 bytes since the write is done with 4 store instructions. In a previous change, the end address, _ebss, was aligned to 16 byte to prevent initializing past the end off the .bss region. However, that does not work unless the start address, _sbss, is also aligned to 16 bytes.	2019-09-16 08:14:32 -06:00
Make.defs
mips-elf-debug.ld	boards/mips Linker Scripts: The PIC32M* start-up code initializes .bss by writing 16 bytes at a time in a loop. The start (_sbss) alignment is only required to be 4 bytes since the write is done with 4 store instructions. In a previous change, the end address, _ebss, was aligned to 16 byte to prevent initializing past the end off the .bss region. However, that does not work unless the start address, _sbss, is also aligned to 16 bytes.	2019-09-16 08:14:32 -06:00
mips-elf-release.ld	boards/mips Linker Scripts: The PIC32M* start-up code initializes .bss by writing 16 bytes at a time in a loop. The start (_sbss) alignment is only required to be 4 bytes since the write is done with 4 store instructions. In a previous change, the end address, _ebss, was aligned to 16 byte to prevent initializing past the end off the .bss region. However, that does not work unless the start address, _sbss, is also aligned to 16 bytes.	2019-09-16 08:14:32 -06:00
pinguino-debug.ld	boards/mips/pic32mx: Add pinguino-debug.ld for PIC32MX boards (#138)	2020-01-21 12:48:25 +01:00
xc32-debug.ld	boards/mips Linker Scripts: The PIC32M* start-up code initializes .bss by writing 16 bytes at a time in a loop. The start (_sbss) alignment is only required to be 4 bytes since the write is done with 4 store instructions. In a previous change, the end address, _ebss, was aligned to 16 byte to prevent initializing past the end off the .bss region. However, that does not work unless the start address, _sbss, is also aligned to 16 bytes.	2019-09-16 08:14:32 -06:00
xc32-release.ld	boards/mips Linker Scripts: The PIC32M* start-up code initializes .bss by writing 16 bytes at a time in a loop. The start (_sbss) alignment is only required to be 4 bytes since the write is done with 4 store instructions. In a previous change, the end address, _ebss, was aligned to 16 byte to prevent initializing past the end off the .bss region. However, that does not work unless the start address, _sbss, is also aligned to 16 bytes.	2019-09-16 08:14:32 -06:00