1ba2240762
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@3617 42af7a65-404d-4744-a932-0658087f49c3
114 lines
5.1 KiB
C
114 lines
5.1 KiB
C
/****************************************************************************
|
||
* drivers/wireless/cc1101/ISM1_868MHzGFSK100kbps.c
|
||
*
|
||
* Copyright (C) 2011 Uros Platise. All rights reserved.
|
||
* Copyright (C) 2011 Ales Verbic. All rights reserved.
|
||
*
|
||
* Authors: Uros Platise <uros.platise@isotel.eu>
|
||
* Ales Verbic <ales.verbic@isotel.eu>
|
||
*
|
||
* Redistribution and use in source and binary forms, with or without
|
||
* modification, are permitted provided that the following conditions
|
||
* are met:
|
||
*
|
||
* 1. Redistributions of source code must retain the above copyright
|
||
* notice, this list of conditions and the following disclaimer.
|
||
* 2. Redistributions in binary form must reproduce the above copyright
|
||
* notice, this list of conditions and the following disclaimer in
|
||
* the documentation and/or other materials provided with the
|
||
* distribution.
|
||
* 3. Neither the name NuttX nor the names of its contributors may be
|
||
* used to endorse or promote products derived from this software
|
||
* without specific prior written permission.
|
||
*
|
||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||
* POSSIBILITY OF SUCH DAMAGE.
|
||
*
|
||
****************************************************************************/
|
||
|
||
#include <nuttx/wireless/cc1101.h>
|
||
|
||
/** Settings for 868 MHz, GFSK at 100kbps
|
||
*
|
||
* ISM Region 1 (Europe) only, Band 868–870 MHz
|
||
*
|
||
* Frequency ERP Duty Cycle Bandwidth Remarks
|
||
* 868 – 868.6 MHz +14 dBm < 1% No limits
|
||
* 868.7 – 869.2 MHz +14 dBm < 0.1% No limits
|
||
* 869.3 – 869.4 MHz +10 dBm No limits < 25 kHz Appropriate access protocol required
|
||
* 869.4 – 869.65 MHz +27 dBm < 10% < 25 kHz Channels may be combined to one high speed channel
|
||
* 869.7 -870 MHz +7 dBm No limits No limits
|
||
*
|
||
* Deviation = 46.142578
|
||
* Base frequency = 867.999985
|
||
* Carrier frequency = 867.999985
|
||
* Channel number = 0
|
||
* Carrier frequency = 867.999985
|
||
* Modulated = true
|
||
* Modulation format = GFSK
|
||
* Manchester enable = false
|
||
* Sync word qualifier mode = 30/32 sync word bits detected
|
||
* Preamble count = 4
|
||
* Channel spacing = 199.813843
|
||
* Carrier frequency = 867.999985
|
||
* Data rate = 99.9069
|
||
* RX filter BW = 210.937500
|
||
* Data format = Normal mode
|
||
* Length config = Fixed packet length mode. Length configured in PKTLEN register
|
||
* CRC enable = true
|
||
* Packet length = 62
|
||
* Device address = 00
|
||
* Address config = NO Address check, no broadcast
|
||
* CRC autoflush = true
|
||
* PA ramping = false
|
||
* TX power = 0
|
||
*/
|
||
const struct c1101_rfsettings_s cc1101_rfsettings_ISM1_868MHzGFSK100kbps = {
|
||
.FSCTRL1 = 0x08, // FSCTRL1 Frequency Synthesizer Control
|
||
.FSCTRL0 = 0x00, // FSCTRL0 Frequency Synthesizer Control
|
||
|
||
.FREQ2 = 0x20, // FREQ2 Frequency Control Word, High Byte
|
||
.FREQ1 = 0x25, // FREQ1 Frequency Control Word, Middle Byte
|
||
.FREQ0 = 0xED, // FREQ0 Frequency Control Word, Low Byte
|
||
|
||
.MDMCFG4 = 0x8B, // MDMCFG4 Modem Configuration
|
||
.MDMCFG3 = 0xE5, // MDMCFG3 Modem Configuration
|
||
.MDMCFG2 = 0x13, // MDMCFG2 Modem Configuration
|
||
.MDMCFG1 = 0x22, // MDMCFG1 Modem Configuration
|
||
.MDMCFG0 = 0xE5, // MDMCFG0 Modem Configuration
|
||
|
||
.DEVIATN = 0x46, // DEVIATN Modem Deviation Setting
|
||
|
||
.FOCCFG = 0x1D, // FOCCFG Frequency Offset Compensation Configuration
|
||
|
||
.BSCFG = 0x1C, // BSCFG Bit Synchronization Configuration
|
||
|
||
.AGCCTRL2= 0xC7, // AGCCTRL2 AGC Control
|
||
.AGCCTRL1= 0x00, // AGCCTRL1 AGC Control
|
||
.AGCCTRL0= 0xB2, // AGCCTRL0 AGC Control
|
||
|
||
.FREND1 = 0xB6, // FREND1 Front End RX Configuration
|
||
.FREND0 = 0x10, // FREND0 Front End TX Configuration
|
||
|
||
.FSCAL3 = 0xEA, // FSCAL3 Frequency Synthesizer Calibration
|
||
.FSCAL2 = 0x2A, // FSCAL2 Frequency Synthesizer Calibration
|
||
.FSCAL1 = 0x00, // FSCAL1 Frequency Synthesizer Calibration
|
||
.FSCAL0 = 0x1F, // FSCAL0 Frequency Synthesizer Calibration
|
||
|
||
.CHMIN = 0, // Fix at 9th channel: 869.80 MHz +- 100 kHz RF Bandwidth
|
||
.CHMAX = 9, // single channel
|
||
|
||
.PAMAX = 8, // 0 means power OFF, 8 represents PA[7]
|
||
.PA = {0x03, 0x0F, 0x1E, 0x27, 0x67, 0x50, 0x81, 0xC2}
|
||
};
|