nuttx/boards/arm/stm32/stm3220g-eval/configs/dhcpd/defconfig
Xiang Xiao e1d3627bb1 sched/wdog: Change the default value of MAX_WDOGPARMS from 4 to 2
since the maximum number of argument pass to wd_start in the whole
code base is 2 and change CONFIG_MAX_WDOGPARMS in some defconfig
from 1 to 2 oherwise pthread_condclockwait will fail

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: Ib6cb28b8c0722058849e7be916e164513431d21c
2020-08-06 10:36:22 -06:00

69 lines
1.8 KiB
Plaintext

#
# This file is autogenerated: PLEASE DO NOT EDIT IT.
#
# You can use "make menuconfig" to make any modifications to the installed .config file.
# You can then do "make savedefconfig" to generate a new defconfig file that includes your
# modifications.
#
# CONFIG_NETUTILS_DHCPD_IGNOREBROADCAST is not set
CONFIG_ARCH="arm"
CONFIG_ARCH_BOARD="stm3220g-eval"
CONFIG_ARCH_BOARD_STM3220G_EVAL=y
CONFIG_ARCH_CHIP="stm32"
CONFIG_ARCH_CHIP_STM32=y
CONFIG_ARCH_CHIP_STM32F207IG=y
CONFIG_ARCH_STACKDUMP=y
CONFIG_BOARD_LOOPSPERMSEC=10926
CONFIG_DISABLE_ENVIRON=y
CONFIG_DISABLE_MOUNTPOINT=y
CONFIG_DISABLE_MQUEUE=y
CONFIG_DISABLE_PTHREAD=y
CONFIG_ETH0_PHY_DP83848C=y
CONFIG_EXAMPLES_DHCPD=y
CONFIG_EXAMPLES_DHCPD_NOMAC=y
CONFIG_HAVE_CXX=y
CONFIG_HAVE_CXXINITIALIZE=y
CONFIG_HOST_WINDOWS=y
CONFIG_INTELHEX_BINARY=y
CONFIG_MAX_TASKS=8
CONFIG_MM_REGIONS=2
CONFIG_NET=y
CONFIG_NETUTILS_DHCPD=y
CONFIG_NETUTILS_NETLIB=y
CONFIG_NET_BROADCAST=y
CONFIG_NET_ICMP=y
CONFIG_NET_SOCKOPTS=y
CONFIG_NET_UDP=y
CONFIG_NET_UDP_CHECKSUMS=y
CONFIG_NFILE_DESCRIPTORS=8
CONFIG_NFILE_STREAMS=8
CONFIG_NSOCKET_DESCRIPTORS=10
CONFIG_NUNGET_CHARS=0
CONFIG_PREALLOC_WDOGS=8
CONFIG_RAM_SIZE=196608
CONFIG_RAM_START=0x20000000
CONFIG_RR_INTERVAL=200
CONFIG_SCHED_HPWORK=y
CONFIG_SCHED_WAITPID=y
CONFIG_SDCLONE_DISABLE=y
CONFIG_START_DAY=13
CONFIG_START_MONTH=12
CONFIG_START_YEAR=2012
CONFIG_STDIO_DISABLE_BUFFERING=y
CONFIG_STM32_DFU=y
CONFIG_STM32_ETHMAC=y
CONFIG_STM32_JTAG_FULL_ENABLE=y
CONFIG_STM32_MII=y
CONFIG_STM32_PHYSR=16
CONFIG_STM32_PHYSR_100MBPS=0x0000
CONFIG_STM32_PHYSR_FULLDUPLEX=0x0004
CONFIG_STM32_PHYSR_MODE=0x0004
CONFIG_STM32_PHYSR_SPEED=0x0002
CONFIG_STM32_USART3=y
CONFIG_TASK_NAME_SIZE=0
CONFIG_USART3_RXBUFSIZE=128
CONFIG_USART3_SERIAL_CONSOLE=y
CONFIG_USART3_TXBUFSIZE=128
CONFIG_USER_ENTRYPOINT="dhcpd_main"
CONFIG_WDOG_INTRESERVE=1