| .. |
|
a1x
|
Big, very risky change: Remove all occurrences of up_maskack_irq() that disable and enable interrupts with up_ack_irq() that only acknowledges the interrupts. This is only used in interrupt decoding logic. Also remove the logic that unconditionally re-enables interrupts with the interrupt exits. This interferes with the drivers ability to control the interrupt state. This is a necessary, sweeping, global change and unfortunately impossible to test.
|
2015-02-09 16:12:11 -06:00 |
|
arm
|
Big, very risky change: Remove all occurrences of up_maskack_irq() that disable and enable interrupts with up_ack_irq() that only acknowledges the interrupts. This is only used in interrupt decoding logic. Also remove the logic that unconditionally re-enables interrupts with the interrupt exits. This interferes with the drivers ability to control the interrupt state. This is a necessary, sweeping, global change and unfortunately impossible to test.
|
2015-02-09 16:12:11 -06:00 |
|
armv6-m
|
Remove CONFIG_DEBUG_STACK. Adding CONFIG_STACK_COLORATION makes this configuration option pointless
|
2015-01-24 06:49:51 -06:00 |
|
armv7-a
|
Big, very risky change: Remove all occurrences of up_maskack_irq() that disable and enable interrupts with up_ack_irq() that only acknowledges the interrupts. This is only used in interrupt decoding logic. Also remove the logic that unconditionally re-enables interrupts with the interrupt exits. This interferes with the drivers ability to control the interrupt state. This is a necessary, sweeping, global change and unfortunately impossible to test.
|
2015-02-09 16:12:11 -06:00 |
|
armv7-m
|
ARM assembly language memcpy.S was not returning a value in R0 it is required to do. From David Sidrane
|
2015-01-29 06:36:53 -06:00 |
|
c5471
|
Big, very risky change: Remove all occurrences of up_maskack_irq() that disable and enable interrupts with up_ack_irq() that only acknowledges the interrupts. This is only used in interrupt decoding logic. Also remove the logic that unconditionally re-enables interrupts with the interrupt exits. This interferes with the drivers ability to control the interrupt state. This is a necessary, sweeping, global change and unfortunately impossible to test.
|
2015-02-09 16:12:11 -06:00 |
|
calypso
|
Remove CONFIG_DEBUG_STACK. Adding CONFIG_STACK_COLORATION makes this configuration option pointless
|
2015-01-24 06:49:51 -06:00 |
|
common
|
Big, very risky change: Remove all occurrences of up_maskack_irq() that disable and enable interrupts with up_ack_irq() that only acknowledges the interrupts. This is only used in interrupt decoding logic. Also remove the logic that unconditionally re-enables interrupts with the interrupt exits. This interferes with the drivers ability to control the interrupt state. This is a necessary, sweeping, global change and unfortunately impossible to test.
|
2015-02-09 16:12:11 -06:00 |
|
dm320
|
Big, very risky change: Remove all occurrences of up_maskack_irq() that disable and enable interrupts with up_ack_irq() that only acknowledges the interrupts. This is only used in interrupt decoding logic. Also remove the logic that unconditionally re-enables interrupts with the interrupt exits. This interferes with the drivers ability to control the interrupt state. This is a necessary, sweeping, global change and unfortunately impossible to test.
|
2015-02-09 16:12:11 -06:00 |
|
efm32
|
EFM32 USB Device: Is not basically functional with this change. From Pierre-noel Bouteville.
|
2015-02-16 15:45:49 -06:00 |
|
imx
|
Big, very risky change: Remove all occurrences of up_maskack_irq() that disable and enable interrupts with up_ack_irq() that only acknowledges the interrupts. This is only used in interrupt decoding logic. Also remove the logic that unconditionally re-enables interrupts with the interrupt exits. This interferes with the drivers ability to control the interrupt state. This is a necessary, sweeping, global change and unfortunately impossible to test.
|
2015-02-09 16:12:11 -06:00 |
|
kinetis
|
All Ethernet drivers (again): Missed one place where arp_out() is called and neighber_out() needs to be called
|
2015-01-21 11:36:33 -06:00 |
|
kl
|
Kinetis: Add architectural support for the K26Z128VLH4. From Derek B. Noonburg
|
2015-02-11 07:15:45 -06:00 |
|
lpc17xx
|
RTC: Remove all backdoor interfaces from rtc.h
|
2015-02-13 08:41:34 -06:00 |
|
lpc31xx
|
Big, very risky change: Remove all occurrences of up_maskack_irq() that disable and enable interrupts with up_ack_irq() that only acknowledges the interrupts. This is only used in interrupt decoding logic. Also remove the logic that unconditionally re-enables interrupts with the interrupt exits. This interferes with the drivers ability to control the interrupt state. This is a necessary, sweeping, global change and unfortunately impossible to test.
|
2015-02-09 16:12:11 -06:00 |
|
lpc43xx
|
Get USART 2 & 3 working on lpc4357-evb. These changes are required to get USART 2 and 3 working on the Embest development board. From Toby Duckworth
|
2015-01-26 07:33:22 -06:00 |
|
lpc214x
|
Remove CONFIG_DEBUG_STACK. Adding CONFIG_STACK_COLORATION makes this configuration option pointless
|
2015-01-24 06:49:51 -06:00 |
|
lpc2378
|
Big, very risky change: Remove all occurrences of up_maskack_irq() that disable and enable interrupts with up_ack_irq() that only acknowledges the interrupts. This is only used in interrupt decoding logic. Also remove the logic that unconditionally re-enables interrupts with the interrupt exits. This interferes with the drivers ability to control the interrupt state. This is a necessary, sweeping, global change and unfortunately impossible to test.
|
2015-02-09 16:12:11 -06:00 |
|
nuc1xx
|
Remove CONFIG_DEBUG_STACK. Adding CONFIG_STACK_COLORATION makes this configuration option pointless
|
2015-01-24 06:49:51 -06:00 |
|
sam34
|
Fix a compilation error. From Macs Neklyudov
|
2015-02-16 14:30:15 -06:00 |
|
sama5
|
RTC: Remove all backdoor interfaces from rtc.h
|
2015-02-13 08:41:34 -06:00 |
|
samd
|
Remove CONFIG_DEBUG_STACK. Adding CONFIG_STACK_COLORATION makes this configuration option pointless
|
2015-01-24 06:49:51 -06:00 |
|
stm32
|
STM32: Fix for compilation introduced by last backup RAM change. Not sure it it is correct, be now things do compile
|
2015-02-21 17:51:03 -06:00 |
|
str71x
|
Big, very risky change: Remove all occurrences of up_maskack_irq() that disable and enable interrupts with up_ack_irq() that only acknowledges the interrupts. This is only used in interrupt decoding logic. Also remove the logic that unconditionally re-enables interrupts with the interrupt exits. This interferes with the drivers ability to control the interrupt state. This is a necessary, sweeping, global change and unfortunately impossible to test.
|
2015-02-09 16:12:11 -06:00 |
|
tiva
|
Fix SSI TX and RX legacy mapping of TM4C1294NC
|
2015-02-24 03:31:12 +01:00 |
|
.gitignore
|
.dSYM only needs to be in the same .gitignore files as .exe
|
2013-05-30 15:02:04 -06:00 |
|
Makefile
|
The 'make export' target needs to bundle up the user C startup file (crt0), not the kernel head object
|
2014-09-04 13:31:34 -06:00 |
