Nathan Hartman 46aaec7ba0 Fix minor typos in docs and comments.

2019-09-29 12:52:20 -06:00

..

drivers

boards/mips/pic32mx&z/drivers/Kconfig: The drivers folder was one level above where it should be.

2019-08-24 14:28:44 -06:00

mirtoo

libs/libc/unistd/lib_getcwd.c: remove stray sched_unlock(). Also fixes several typos.

2019-09-20 06:23:48 -06:00

pic32mx7mmb

Fix minor typos in docs and comments.

2019-09-29 12:52:20 -06:00

pic32mx-starterkit

boards/mips Linker Scripts: The PIC32M* start-up code initializes .bss by writing 16 bytes at a time in a loop. The start (_sbss) alignment is only required to be 4 bytes since the write is done with 4 store instructions. In a previous change, the end address, _ebss, was aligned to 16 byte to prevent initializing past the end off the .bss region. However, that does not work unless the start address, _sbss, is also aligned to 16 bytes.

2019-09-16 08:14:32 -06:00

sure-pic32mx

boards/mips Linker Scripts: The PIC32M* start-up code initializes .bss by writing 16 bytes at a time in a loop. The start (_sbss) alignment is only required to be 4 bytes since the write is done with 4 store instructions. In a previous change, the end address, _ebss, was aligned to 16 byte to prevent initializing past the end off the .bss region. However, that does not work unless the start address, _sbss, is also aligned to 16 bytes.

2019-09-16 08:14:32 -06:00

ubw32

boards/mips Linker Scripts: The PIC32M* start-up code initializes .bss by writing 16 bytes at a time in a loop. The start (_sbss) alignment is only required to be 4 bytes since the write is done with 4 store instructions. In a previous change, the end address, _ebss, was aligned to 16 byte to prevent initializing past the end off the .bss region. However, that does not work unless the start address, _sbss, is also aligned to 16 bytes.

2019-09-16 08:14:32 -06:00