sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
1660329d06
nuttx/arch/mips/src/pic32mx/pic32mx.h

645 lines
22 KiB
C
Raw Blame History

/************************************************************************************
* arch/mips/src/pic32mx/pic32mx.h
*
* Copyright (C) 2011-2012, 2015 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
************************************************************************************/
#ifndef __ARCH_MIPS_SRC_PIC32MX_PIC32MX_H
#define __ARCH_MIPS_SRC_PIC32MX_PIC32MX_H
/************************************************************************************
* Included Files
************************************************************************************/
#include <nuttx/config.h>
#include <nuttx/compiler.h>
#include <sys/types.h>
#include <stdint.h>
#include <stdbool.h>
#include <nuttx/spi/spi.h>
#include "up_internal.h"
#include "chip.h"
#include "pic32mx-config.h"
/************************************************************************************
* Pre-processor Definitions
************************************************************************************/
/* GPIO settings used in the configport, readport, writeport, etc.
*
* General encoding:
* MMAV IIDx RRRx PPPP
*/
#define GPIO_MODE_SHIFT (14) /* Bits 14-15: I/O mode */
#define GPIO_MODE_MASK (3 << GPIO_MODE_SHIFT)
# define GPIO_INPUT (0 << GPIO_MODE_SHIFT) /* 00 Normal input */
# define GPIO_OUTPUT (2 << GPIO_MODE_SHIFT) /* 10 Normal output */
# define GPIO_OPENDRAN (3 << GPIO_MODE_SHIFT) /* 11 Open drain output */
#if defined(CHIP_PIC32MX1) || defined(CHIP_PIC32MX2)
#define GPIO_ANALOG_MASK (1 << 13) /* Bit 13: Analog */
# define GPIO_ANALOG (1 << 13)
# define GPIO_DIGITAL (0)
#endif
#define GPIO_VALUE_MASK (1 << 12) /* Bit 12: Initial output value */
# define GPIO_VALUE_ONE (1 << 12)
# define GPIO_VALUE_ZERO (0)
#if defined(CHIP_PIC32MX1) || defined(CHIP_PIC32MX2)
# define GPIO_PULLUP (1 << 11) /* Bit 11: Change notification pull-up */
#endif
#define GPIO_INT_SHIFT (10) /* Bits 10-11: Interrupt mode */
#define GPIO_INT_MASK (3 << GPIO_INT_SHIFT)
# define GPIO_INT_NONE (0 << GPIO_INT_SHIFT) /* Bit 00: No interrupt */
# define GPIO_INT (1 << GPIO_INT_SHIFT) /* Bit 01: Change notification enable */
# define GPIO_PUINT (3 << GPIO_INT_SHIFT) /* Bit 11: Pulled-up interrupt input */
#if defined(CHIP_PIC32MX1) || defined(CHIP_PIC32MX2)
# define GPIO_PULLDOWN (1 << 9) /* Bit 11: Change notification pull-down */
#endif
#define GPIO_PORT_SHIFT (5) /* Bits 5-7: Port number */
#define GPIO_PORT_MASK (7 << GPIO_PORT_SHIFT)
# define GPIO_PORTA (0 << GPIO_PORT_SHIFT)
# define GPIO_PORTB (1 << GPIO_PORT_SHIFT)
# define GPIO_PORTC (2 << GPIO_PORT_SHIFT)
# define GPIO_PORTD (3 << GPIO_PORT_SHIFT)
# define GPIO_PORTE (4 << GPIO_PORT_SHIFT)
# define GPIO_PORTF (5 << GPIO_PORT_SHIFT)
# define GPIO_PORTG (6 << GPIO_PORT_SHIFT)
#define GPIO_PIN_SHIFT 0 /* Bits 0-3: GPIO number: 0-15 */
#define GPIO_PIN_MASK (15 << GPIO_PIN_SHIFT)
#define GPIO_PIN0 (0 << GPIO_PIN_SHIFT)
#define GPIO_PIN1 (1 << GPIO_PIN_SHIFT)
#define GPIO_PIN2 (2 << GPIO_PIN_SHIFT)
#define GPIO_PIN3 (3 << GPIO_PIN_SHIFT)
#define GPIO_PIN4 (4 << GPIO_PIN_SHIFT)
#define GPIO_PIN5 (5 << GPIO_PIN_SHIFT)
#define GPIO_PIN6 (6 << GPIO_PIN_SHIFT)
#define GPIO_PIN7 (7 << GPIO_PIN_SHIFT)
#define GPIO_PIN8 (8 << GPIO_PIN_SHIFT)
#define GPIO_PIN9 (9 << GPIO_PIN_SHIFT)
#define GPIO_PIN10 (10 << GPIO_PIN_SHIFT)
#define GPIO_PIN11 (11 << GPIO_PIN_SHIFT)
#define GPIO_PIN12 (12 << GPIO_PIN_SHIFT)
#define GPIO_PIN13 (13 << GPIO_PIN_SHIFT)
#define GPIO_PIN14 (14 << GPIO_PIN_SHIFT)
#define GPIO_PIN15 (15 << GPIO_PIN_SHIFT)
/************************************************************************************
* Public Types
************************************************************************************/
typedef FAR void *DMA_HANDLE;
typedef void (*dma_callback_t)(DMA_HANDLE handle, void *arg, int result);
/* The following is used for sampling DMA registers when CONFIG DEBUG_DMA is selected */
#ifdef CONFIG_DEBUG_DMA
struct pic32mx_dmaglobalregs_s
{
/* Global Registers */
#warning "Missing definitions"
};
struct pic32mx_dmachanregs_s
{
/* Channel Registers */
#warning "Missing definitions"
};
struct pic32mx_dmaregs_s
{
/* Global Registers */
struct pic32mx_dmaglobalregs_s gbl;
/* Channel Registers */
struct pic32mx_dmachanregs_s ch;
};
#endif
/************************************************************************************
* Inline Functions
************************************************************************************/
#ifndef __ASSEMBLY__
/************************************************************************************
* Public Data
************************************************************************************/
#undef EXTERN
#if defined(__cplusplus)
#define EXTERN extern "C"
extern "C"
{
#else
#define EXTERN extern
#endif
/************************************************************************************
* Public Function Prototypes
************************************************************************************/
/************************************************************************************
* Name: pic32mx_lowinit
*
* Description:
* This performs basic low-level initialization of the system.
*
************************************************************************************/
void pic32mx_lowinit(void);
/************************************************************************************
* Name: pic32mx_consoleinit
*
* Description:
* Performs low level initialization of the console UART. This UART done early so
* that the serial console is available for debugging very early in the boot
* sequence.
*
************************************************************************************/
#ifdef HAVE_SERIAL_CONSOLE
void pic32mx_consoleinit(void);
#else
# define pic32mx_consoleinit()
#endif
/****************************************************************************
* Name: pic32mx_uartreset
*
* Description:
* Reset a UART.
*
****************************************************************************/
#ifdef HAVE_UART_DEVICE
void pic32mx_uartreset(uintptr_t uart_base);
#endif
/****************************************************************************
* Name: pic32mx_uartconfigure
*
* Description:
* Configure a UART as a RS-232 UART.
*
****************************************************************************/
#ifdef HAVE_UART_DEVICE
void pic32mx_uartconfigure(uintptr_t uart_base, uint32_t baudrate,
unsigned int parity, unsigned int nbits, bool stop2);
#endif
/************************************************************************************
* Name: pic32mx_boardinitialize
*
* Description:
* This function must be provided by the board-specific logic in the directory
* configs/<board-name>/pic32_boot.c.
*
************************************************************************************/
void pic32mx_boardinitialize(void);
/************************************************************************************
* Name: pic32mx_decodeirq
*
* Description:
* Called from assembly language logic when an interrupt exception occurs. This
* function decodes and dispatches the interrupt.
*
************************************************************************************/
uint32_t *pic32mx_decodeirq(uint32_t *regs);
/************************************************************************************
* Name: pic32mx_exception
*
* Description:
* Called from assembly language logic on all other exceptions.
*
************************************************************************************/
uint32_t *pic32mx_exception(uint32_t *regs);
/************************************************************************************
* Name: pic32mx_configgpio
*
* Description:
* Configure a GPIO pin based on bit-encoded description of the pin (the interrupt
* will be configured when pic32mx_attach() is called).
*
* Returned Value:
* OK on success; negated errno on failure.
*
************************************************************************************/
int pic32mx_configgpio(uint16_t cfgset);
/************************************************************************************
* Name: pic32mx_gpiowrite
*
* Description:
* Write one or zero to the selected GPIO pin
*
************************************************************************************/
void pic32mx_gpiowrite(uint16_t pinset, bool value);
/************************************************************************************
* Name: pic32mx_gpioread
*
* Description:
* Read one or zero from the selected GPIO pin
*
************************************************************************************/
bool pic32mx_gpioread(uint16_t pinset);
/************************************************************************************
* Name: pic32mx_gpioirqinitialize
*
* Description:
* Initialize logic to support a GPIO change notification interrupts. This
* function is called internally by the system on power up and should not be
* called again.
*
************************************************************************************/
#ifdef CONFIG_PIC32MX_GPIOIRQ
void pic32mx_gpioirqinitialize(void);
#else
# define pic32mx_gpioirqinitialize()
#endif
/************************************************************************************
* Name: pic32mx_gpioattach
*
* Description:
* Attach an interrupt service routine to a GPIO interrupt. This will also
* reconfigure the pin as an interrupting input. The change notification number is
* associated with all interrupt-capable GPIO pins. The association could,
* however, differ from part to part and must be provided by the caller.
*
* When an interrupt occurs, it is due to a change on the GPIO input pin. In that
* case, all attached handlers will be called. Each handler must maintain state
* and determine if the underlying GPIO input value changed.
*
* Parameters:
* - pinset: GPIO pin configuration
* - cn: The change notification number associated with the pin
* - handler: Interrupt handler (may be NULL to detach)
*
* Returns:
* The previous value of the interrupt handler function pointer. This value may,
* for example, be used to restore the previous handler when multiple handlers are
* used.
*
************************************************************************************/
#ifdef CONFIG_PIC32MX_GPIOIRQ
xcpt_t pic32mx_gpioattach(uint32_t pinset, unsigned int cn, xcpt_t handler);
#else
# define pic32mx_gpioattach(p,f) (NULL)
#endif
/************************************************************************************
* Name: pic32mx_gpioirqenable
*
* Description:
* Enable the interrupt for specified GPIO IRQ
*
************************************************************************************/
#ifdef CONFIG_PIC32MX_GPIOIRQ
void pic32mx_gpioirqenable(unsigned int cn);
#else
# define pic32mx_gpioirqenable(irq)
#endif
/************************************************************************************
* Name: pic32mx_gpioirqdisable
*
* Description:
* Disable the interrupt for specified GPIO IRQ
*
************************************************************************************/
#ifdef CONFIG_PIC32MX_GPIOIRQ
void pic32mx_gpioirqdisable(unsigned int cn);
#else
# define pic32mx_gpioirqdisable(irq)
#endif
/************************************************************************************
* Function: pic32mx_dumpgpio
*
* Description:
* Dump all GPIO registers associated with the provided base address
*
************************************************************************************/
#ifdef CONFIG_DEBUG_GPIO_INFO
void pic32mx_dumpgpio(uint32_t pinset, const char *msg);
#else
# define pic32mx_dumpgpio(p,m)
#endif
/****************************************************************************
* Name: pic32mx_spibus_initialize
*
* Description:
* Initialize the selected SPI port
*
* Input Parameter:
* Port number (for hardware that has mutiple SPI interfaces)
*
* Returned Value:
* Valid SPI device structure reference on succcess; a NULL on failure
*
****************************************************************************/
struct spi_dev_s; /* Forward reference */
enum spi_dev_e; /* Forward reference */
FAR struct spi_dev_s *pic32mx_spibus_initialize(int port);
/************************************************************************************
* Name: pic32mx_spiNselect, pic32mx_spiNstatus, and pic32mx_spiNcmddata
*
* Description:
* These external functions must be provided by board-specific logic. They are
* implementations of the select, status, and cmddata methods of the SPI interface
* defined by struct spi_ops_s (see include/nuttx/spi/spi.h). All other methods
* including pic32mx_spibus_initialize()) are provided by common PIC32MX logic. To use
* this common SPI logic on your board:
*
* 1. Provide logic in pic32mx_boardinitialize() to configure SPI/SSP chip select
* pins.
* 2. Provide pic32mx_spiNselect() and pic32mx_spiNstatus() functions
* in your board-specific logic. These functions will perform chip selection
* and status operations using GPIOs in the way your board is configured.
* 2. If CONFIG_SPI_CMDDATA is defined in the NuttX configuration, provide
* pic32mx_spiNcmddata() functions in your board-specific logic. These
* functions will perform cmd/data selection operations using GPIOs in the way
* your board is configured.
* 3. Add a call to pic32mx_spibus_initialize() in your low level application
* initialization logic
* 4. The handle returned by pic32mx_spibus_initialize() may then be used to bind the
* SPI driver to higher level logic (e.g., calling
* mmcsd_spislotinitialize(), for example, will bind the SPI driver to
* the SPI MMC/SD driver).
*
************************************************************************************/
#ifdef CONFIG_PIC32MX_SPI1
void pic32mx_spi1select(FAR struct spi_dev_s *dev, enum spi_dev_e devid,
bool selected);
uint8_t pic32mx_spi1status(FAR struct spi_dev_s *dev, enum spi_dev_e devid);
#ifdef CONFIG_SPI_CMDDATA
int pic32mx_spi1cmddata(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool cmd);
#endif
#endif
#ifdef CONFIG_PIC32MX_SPI2
void pic32mx_spi2select(FAR struct spi_dev_s *dev, enum spi_dev_e devid,
bool selected);
uint8_t pic32mx_spi2status(FAR struct spi_dev_s *dev, enum spi_dev_e devid);
#ifdef CONFIG_SPI_CMDDATA
int pic32mx_spi2cmddata(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool cmd);
#endif
#endif
#ifdef CONFIG_PIC32MX_SPI3
void pic32mx_spi3select(FAR struct spi_dev_s *dev, enum spi_dev_e devid,
bool selected);
uint8_t pic32mx_spi3status(FAR struct spi_dev_s *dev, enum spi_dev_e devid);
#ifdef CONFIG_SPI_CMDDATA
int pic32mx_spi3cmddata(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool cmd);
#endif
#endif
#ifdef CONFIG_PIC32MX_SPI3
void pic32mx_spi3select(FAR struct spi_dev_s *dev, enum spi_dev_e devid,
bool selected);
uint8_t pic32mx_spi3status(FAR struct spi_dev_s *dev, enum spi_dev_e devid);
#ifdef CONFIG_SPI_CMDDATA
int pic32mx_spi3cmddata(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool cmd);
#endif
#endif
/************************************************************************************
* Name: pic32mx_dmainitialize
*
* Description:
* Initialize the GPDMA subsystem.
*
* Returned Value:
* None
*
************************************************************************************/
#ifdef CONFIG_PIC32MX_DMA
void pic32mx_dmainitilaize(void);
#endif
/************************************************************************************
* Name: pic32mx_dmachannel
*
* Description:
* Allocate a DMA channel. This function sets aside a DMA channel and gives the
* caller exclusive access to the DMA channel.
*
* Returned Value:
* One success, this function returns a non-NULL, void* DMA channel handle. NULL
* is returned on any failure. This function can fail only if no DMA channel is
* available.
*
************************************************************************************/
#ifdef CONFIG_PIC32MX_DMA
DMA_HANDLE pic32mx_dmachannel(void);
#endif
/************************************************************************************
* Name: pic32mx_dmafree
*
* Description:
* Release a DMA channel. NOTE: The 'handle' used in this argument must NEVER be
* used again until pic32mx_dmachannel() is called again to re-gain a valid handle.
*
* Returned Value:
* None
*
************************************************************************************/
#ifdef CONFIG_PIC32MX_DMA
void pic32mx_dmafree(DMA_HANDLE handle);
#endif
/************************************************************************************
* Name: pic32mx_dmasetup
*
* Description:
* Configure DMA for one transfer.
*
************************************************************************************/
#ifdef CONFIG_PIC32MX_DMA
int pic32mx_dmarxsetup(DMA_HANDLE handle, uint32_t control, uint32_t config,
uint32_t srcaddr, uint32_t destaddr, size_t nbytes);
#endif
/************************************************************************************
* Name: pic32mx_dmastart
*
* Description:
* Start the DMA transfer
*
************************************************************************************/
#ifdef CONFIG_PIC32MX_DMA
int pic32mx_dmastart(DMA_HANDLE handle, dma_callback_t callback, void *arg);
#endif
/************************************************************************************
* Name: pic32mx_dmastop
*
* Description:
* Cancel the DMA. After pic32mx_dmastop() is called, the DMA channel is reset
* and pic32mx_dmasetup() must be called before pic32mx_dmastart() can be called
* again
*
************************************************************************************/
#ifdef CONFIG_PIC32MX_DMA
void pic32mx_dmastop(DMA_HANDLE handle);
#endif
/************************************************************************************
* Name: pic32mx_dmasample
*
* Description:
* Sample DMA register contents
*
************************************************************************************/
#ifdef CONFIG_PIC32MX_DMA
#ifdef CONFIG_DEBUG_DMA
void pic32mx_dmasample(DMA_HANDLE handle, struct pic32mx_dmaregs_s *regs);
#else
# define pic32mx_dmasample(handle,regs)
#endif
#endif
/************************************************************************************
* Name: pic32mx_dmadump
*
* Description:
* Dump previously sampled DMA register contents
*
************************************************************************************/
#ifdef CONFIG_PIC32MX_DMA
#ifdef CONFIG_DEBUG_DMA
void pic32mx_dmadump(DMA_HANDLE handle, const struct pic32mx_dmaregs_s *regs,
const char *msg);
#else
# define pic32mx_dmadump(handle,regs,msg)
#endif
#endif
/************************************************************************************
* Name: pic32mx_usbpullup
*
* Description:
* If USB is supported and the board supports a pullup via GPIO (for USB software
* connect and disconnect), then the board software must provide pic32mx_pullup.
* See include/nuttx/usb/usbdev.h for additional description of this method.
* Alternatively, if no pull-up GPIO the following can be redefined to be
* NULL.
*
************************************************************************************/
#ifdef CONFIG_PIC32MX_USBDEV
struct usbdev_s;
int pic32mx_usbpullup(FAR struct usbdev_s *dev, bool enable);
#endif
/************************************************************************************
* Name: pic32mx_usbsuspend
*
* Description:
* Board logic must provide the pic32mx_usbsuspend logic if the USBDEV driver is
* used. This function is called whenever the USB enters or leaves suspend mode.
* This is an opportunity for the board logic to shutdown clocks, power, etc. while
* the USB is suspended.
*
************************************************************************************/
#ifdef CONFIG_PIC32MX_USBDEV
void pic32mx_usbsuspend(FAR struct usbdev_s *dev, bool resume);
#endif
/************************************************************************************
* Name: pic32mx_usbattach and pic32mx_usbdetach
*
* Description:
* The USB stack must be notified when the device is attached or detached by
* calling one of these functions.
*
************************************************************************************/
#ifdef CONFIG_PIC32MX_USBDEV
void pic32mx_usbattach(void);
void pic32mx_usbdetach(void);
#endif
#undef EXTERN
#if defined(__cplusplus)
}
#endif
#endif /* __ASSEMBLY__ */
#endif /* __ARCH_MIPS_SRC_PIC32MX_PIC32MX_H */
Reference in New Issue View Git Blame Copy Permalink