sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
19feab1bd6
nuttx/drivers/timers/timer.c
Gregory Nutt cf14f8d1b5 drivers/: Fixes to spacing and alignement
2015-10-10 10:41:00 -06:00

535 lines
15 KiB
C
Raw Blame History

/****************************************************************************
* drivers/timers/timer.c
*
* Copyright (C) 2014 Gregory Nutt. All rights reserved.
* Authors: Gregory Nutt <gnutt@nuttx.org>
* Bob Doiron
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <sys/types.h>
#include <stdint.h>
#include <stdbool.h>
#include <string.h>
#include <semaphore.h>
#include <fcntl.h>
#include <assert.h>
#include <errno.h>
#include <debug.h>
#include <nuttx/fs/fs.h>
#include <nuttx/irq.h>
#include <nuttx/kmalloc.h>
#include <nuttx/timers/timer.h>
#ifdef CONFIG_TIMER
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
/* Debug ********************************************************************/
/* Non-standard debug that may be enabled just for testing the timer driver */
#ifdef CONFIG_DEBUG_TIMER
# define tmrdbg dbg
# define tmrvdbg vdbg
# define tmrlldbg lldbg
# define tmrllvdbg llvdbg
#else
# define tmrdbg(x...)
# define tmrvdbg(x...)
# define tmrlldbg(x...)
# define tmrllvdbg(x...)
#endif
/****************************************************************************
* Private Type Definitions
****************************************************************************/
/* This structure describes the state of the upper half driver */
struct timer_upperhalf_s
{
uint8_t crefs; /* The number of times the device has been opened */
FAR char *path; /* Registration path */
/* The contained lower-half driver */
FAR struct timer_lowerhalf_s *lower;
};
/****************************************************************************
* Private Function Prototypes
****************************************************************************/
static int timer_open(FAR struct file *filep);
static int timer_close(FAR struct file *filep);
static ssize_t timer_read(FAR struct file *filep, FAR char *buffer,
size_t buflen);
static ssize_t timer_write(FAR struct file *filep, FAR const char *buffer,
size_t buflen);
static int timer_ioctl(FAR struct file *filep, int cmd,
unsigned long arg);
/****************************************************************************
* Private Data
****************************************************************************/
static const struct file_operations g_timerops =
{
timer_open, /* open */
timer_close, /* close */
timer_read, /* read */
timer_write, /* write */
0, /* seek */
timer_ioctl /* ioctl */
#ifndef CONFIG_DISABLE_POLL
, 0 /* poll */
#endif
};
/****************************************************************************
* Private Functions
****************************************************************************/
/************************************************************************************
* Name: timer_open
*
* Description:
* This function is called whenever the timer device is opened.
*
************************************************************************************/
static int timer_open(FAR struct file *filep)
{
FAR struct inode *inode = filep->f_inode;
FAR struct timer_upperhalf_s *upper = inode->i_private;
uint8_t tmp;
int ret;
tmrvdbg("crefs: %d\n", upper->crefs);
/* Increment the count of references to the device. If this the first
* time that the driver has been opened for this device, then initialize
* the device.
*/
tmp = upper->crefs + 1;
if (tmp == 0)
{
/* More than 255 opens; uint8_t overflows to zero */
ret = -EMFILE;
goto errout;
}
/* Save the new open count */
upper->crefs = tmp;
ret = OK;
errout:
return ret;
}
/************************************************************************************
* Name: timer_close
*
* Description:
* This function is called when the timer device is closed.
*
************************************************************************************/
static int timer_close(FAR struct file *filep)
{
FAR struct inode *inode = filep->f_inode;
FAR struct timer_upperhalf_s *upper = inode->i_private;
tmrvdbg("crefs: %d\n", upper->crefs);
/* Decrement the references to the driver. If the reference count will
* decrement to 0, then uninitialize the driver.
*/
if (upper->crefs > 0)
{
upper->crefs--;
}
return OK;
}
/************************************************************************************
* Name: timer_read
*
* Description:
* A dummy read method. This is provided only to satisfy the VFS layer.
*
************************************************************************************/
static ssize_t timer_read(FAR struct file *filep, FAR char *buffer, size_t buflen)
{
/* Return zero -- usually meaning end-of-file */
return 0;
}
/************************************************************************************
* Name: timer_write
*
* Description:
* A dummy write method. This is provided only to satisfy the VFS layer.
*
************************************************************************************/
static ssize_t timer_write(FAR struct file *filep, FAR const char *buffer,
size_t buflen)
{
return 0;
}
/************************************************************************************
* Name: timer_ioctl
*
* Description:
* The standard ioctl method. This is where ALL of the timer work is
* done.
*
************************************************************************************/
static int timer_ioctl(FAR struct file *filep, int cmd, unsigned long arg)
{
FAR struct inode *inode = filep->f_inode;
FAR struct timer_upperhalf_s *upper = inode->i_private;
FAR struct timer_lowerhalf_s *lower = upper->lower;
int ret;
tmrvdbg("cmd: %d arg: %ld\n", cmd, arg);
DEBUGASSERT(upper && lower);
/* Handle built-in ioctl commands */
switch (cmd)
{
/* cmd: TCIOC_START
* Description: Start the timer
* Argument: Ignored
*/
case TCIOC_START:
{
/* Start the timer, resetting the time to the current timeout */
if (lower->ops->start)
{
ret = lower->ops->start(lower);
}
else
{
ret = -ENOSYS;
}
}
break;
/* cmd: TCIOC_STOP
* Description: Stop the timer
* Argument: Ignored
*/
case TCIOC_STOP:
{
/* Stop the timer */
if (lower->ops->start)
{
ret = lower->ops->stop(lower);
}
else
{
ret = -ENOSYS;
}
}
break;
/* cmd: TCIOC_GETSTATUS
* Description: Get the status of the timer.
* Argument: A writeable pointer to struct timer_status_s.
*/
case TCIOC_GETSTATUS:
{
FAR struct timer_status_s *status;
/* Get the current timer status */
if (lower->ops->getstatus) /* Optional */
{
status = (FAR struct timer_status_s *)((uintptr_t)arg);
if (status)
{
ret = lower->ops->getstatus(lower, status);
}
else
{
ret = -EINVAL;
}
}
else
{
ret = -ENOSYS;
}
}
break;
/* cmd: TCIOC_SETTIMEOUT
* Description: Reset the timeout to this value
* Argument: A 32-bit timeout value in microseconds.
*
* TODO: pass pointer to uint64 ns? Need to determine if these timers
* are 16 or 32 bit...
*/
case TCIOC_SETTIMEOUT:
{
/* Set a new timeout value (and reset the timer) */
if (lower->ops->settimeout) /* Optional */
{
ret = lower->ops->settimeout(lower, (uint32_t)arg);
}
else
{
ret = -ENOSYS;
}
}
break;
/* cmd: TCIOC_SETHANDLER
* Description: Call this handler on timeout
* Argument: A pointer to struct timer_sethandler_s.
*
* NOTE: This ioctl cannot be support in the kernel build mode. In that
* case direct callbacks from kernel space into user space is forbidden.
*/
#if !defined(CONFIG_BUILD_PROTECTED) && !defined(CONFIG_BUILD_KERNEL)
case TCIOC_SETHANDLER:
{
FAR struct timer_sethandler_s *sethandler;
/* Don't reset on timer timeout; instead, call this user
* provider timeout handler. NOTE: Providing handler==NULL will
* restore the reset behavior.
*/
if (lower->ops->sethandler) /* Optional */
{
sethandler = (FAR struct timer_sethandler_s *)((uintptr_t)arg);
if (sethandler)
{
sethandler->oldhandler =
lower->ops->sethandler(lower, sethandler->newhandler);
ret = OK;
}
else
{
ret = -EINVAL;
}
}
else
{
ret = -ENOSYS;
}
}
break;
#endif
/* Any unrecognized IOCTL commands might be platform-specific ioctl commands */
default:
{
tmrvdbg("Forwarding unrecognized cmd: %d arg: %ld\n", cmd, arg);
/* An ioctl commands that are not recognized by the "upper-half"
* driver are forwarded to the lower half driver through this
* method.
*/
if (lower->ops->ioctl) /* Optional */
{
ret = lower->ops->ioctl(lower, cmd, arg);
}
else
{
ret = -ENOSYS;
}
}
break;
}
return ret;
}
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: timer_register
*
* Description:
* This function binds an instance of a "lower half" timer driver with the
* "upper half" timer device and registers that device so that can be used
* by application code.
*
* When this function is called, the "lower half" driver should be in the
* disabled state (as if the stop() method had already been called).
*
* Input parameters:
* dev path - The full path to the driver to be registers in the NuttX
* pseudo-filesystem. The recommended convention is to name all timer
* drivers as "/dev/tc0", "/dev/tc1", etc. where the driver
* path differs only in the "minor" number at the end of the device name.
* lower - A pointer to an instance of lower half timer driver. This
* instance is bound to the timer driver and must persists as long as
* the driver persists.
*
* Returned Value:
* On success, a non-NULL handle is returned to the caller. In the event
* of any failure, a NULL value is returned.
*
****************************************************************************/
FAR void *timer_register(FAR const char *path,
FAR struct timer_lowerhalf_s *lower)
{
FAR struct timer_upperhalf_s *upper;
int ret;
DEBUGASSERT(path && lower);
tmrvdbg("Entry: path=%s\n", path);
/* Allocate the upper-half data structure */
upper = (FAR struct timer_upperhalf_s *)
kmm_zalloc(sizeof(struct timer_upperhalf_s));
if (!upper)
{
tmrdbg("Upper half allocation failed\n");
goto errout;
}
/* Initialize the timer device structure (it was already zeroed
* by kmm_zalloc()).
*/
upper->lower = lower;
/* Copy the registration path */
upper->path = strdup(path);
if (!upper->path)
{
tmrdbg("Path allocation failed\n");
goto errout_with_upper;
}
/* Register the timer device */
ret = register_driver(path, &g_timerops, 0666, upper);
if (ret < 0)
{
tmrdbg("register_driver failed: %d\n", ret);
goto errout_with_path;
}
return (FAR void *)upper;
errout_with_path:
kmm_free(upper->path);
errout_with_upper:
kmm_free(upper);
errout:
return NULL;
}
/****************************************************************************
* Name: timer_unregister
*
* Description:
* This function can be called to disable and unregister the timer
* device driver.
*
* Input parameters:
* handle - This is the handle that was returned by timer_register()
*
* Returned Value:
* None
*
****************************************************************************/
void timer_unregister(FAR void *handle)
{
FAR struct timer_upperhalf_s *upper;
FAR struct timer_lowerhalf_s *lower;
/* Recover the pointer to the upper-half driver state */
upper = (FAR struct timer_upperhalf_s *)handle;
lower = upper->lower;
DEBUGASSERT(upper && lower);
tmrvdbg("Unregistering: %s\n", upper->path);
/* Disable the timer */
DEBUGASSERT(lower->ops->stop); /* Required */
(void)lower->ops->stop(lower);
/* Unregister the timer device */
(void)unregister_driver(upper->path);
/* Then free all of the driver resources */
kmm_free(upper->path);
kmm_free(upper);
}
#endif /* CONFIG_TIMER */
Reference in New Issue View Git Blame Copy Permalink