Gregory Nutt 1ace391fcf MMCSD SDIO: Add support for a new SDWAIT_WRCOMPLETE condition. The previous logic used a busy-wait loop to pool the card R1 start to determine when the card was ready for the next transfer. That busy-wait can be quite long -- hundreds of milliseconds. And alternative is to look the the SD D0 pin which will change state when the card is no longer busy. ... This logic implements a change the avoids the busy-wait poll by reconfiguring the SD D0 pin as a GPIO interrupt, then waiting for the card to becom ready without taking up CPU cycles. This change is conditioned on CONFIG_MMCSD_SDIOWATI_WRCOMPLETE and is currenlty only implemented for the STM32 SDIO driver. From David Sidrane		2015-01-08 06:23:42 -06:00
..
include	TM4C129X Timer: Update addresses in the timer register definitions file. Still missing bit field definitions	2015-01-07 08:57:48 -06:00
src	MMCSD SDIO: Add support for a new SDWAIT_WRCOMPLETE condition. The previous logic used a busy-wait loop to pool the card R1 start to determine when the card was ready for the next transfer. That busy-wait can be quite long -- hundreds of milliseconds. And alternative is to look the the SD D0 pin which will change state when the card is no longer busy.	2015-01-08 06:23:42 -06:00
Kconfig	EFM32: Add buton interrupt handling for the Olimex board	2014-10-21 13:51:30 -06:00