370913df84
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5807 42af7a65-404d-4744-a932-0658087f49c3
248 lines
13 KiB
C
248 lines
13 KiB
C
/************************************************************************************
|
|
* arch/arm/src/stm32/chip/stm32f40xxx_uart.h
|
|
*
|
|
* Copyright (C) 2009, 2011-2014 Gregory Nutt. All rights reserved.
|
|
* Author: Gregory Nutt <gnutt@nuttx.org>
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
*
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in
|
|
* the documentation and/or other materials provided with the
|
|
* distribution.
|
|
* 3. Neither the name NuttX nor the names of its contributors may be
|
|
* used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
|
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
|
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
|
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
|
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
|
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
|
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
* POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
************************************************************************************/
|
|
|
|
#ifndef __ARCH_ARM_STC_STM32_CHIP_STM32F40XXX_UART_H
|
|
#define __ARCH_ARM_STC_STM32_CHIP_STM32F40XXX_UART_H
|
|
|
|
/************************************************************************************
|
|
* Included Files
|
|
************************************************************************************/
|
|
|
|
#include <nuttx/config.h>
|
|
|
|
#include "chip.h"
|
|
|
|
/************************************************************************************
|
|
* Pre-processor Definitions
|
|
************************************************************************************/
|
|
|
|
/* Register Offsets *****************************************************************/
|
|
|
|
#define STM32_USART_SR_OFFSET 0x0000 /* Status register (32-bits) */
|
|
#define STM32_USART_DR_OFFSET 0x0004 /* Data register (32-bits) */
|
|
#define STM32_USART_BRR_OFFSET 0x0008 /* Baud Rate Register (32-bits) */
|
|
#define STM32_USART_CR1_OFFSET 0x000c /* Control register 1 (32-bits) */
|
|
#define STM32_USART_CR2_OFFSET 0x0010 /* Control register 2 (32-bits) */
|
|
#define STM32_USART_CR3_OFFSET 0x0014 /* Control register 3 (32-bits) */
|
|
#define STM32_USART_GTPR_OFFSET 0x0018 /* Guard time and prescaler register (32-bits) */
|
|
|
|
/* Register Addresses ***************************************************************/
|
|
|
|
#if STM32_NUSART > 0
|
|
# define STM32_USART1_SR (STM32_USART1_BASE+STM32_USART_SR_OFFSET)
|
|
# define STM32_USART1_DR (STM32_USART1_BASE+STM32_USART_DR_OFFSET)
|
|
# define STM32_USART1_BRR (STM32_USART1_BASE+STM32_USART_BRR_OFFSET)
|
|
# define STM32_USART1_CR1 (STM32_USART1_BASE+STM32_USART_CR1_OFFSET)
|
|
# define STM32_USART1_CR2 (STM32_USART1_BASE+STM32_USART_CR2_OFFSET)
|
|
# define STM32_USART1_CR3 (STM32_USART1_BASE+STM32_USART_CR3_OFFSET)
|
|
# define STM32_USART1_GTPR (STM32_USART1_BASE+STM32_USART_GTPR_OFFSET)
|
|
#endif
|
|
|
|
#if STM32_NUSART > 1
|
|
# define STM32_USART2_SR (STM32_USART2_BASE+STM32_USART_SR_OFFSET)
|
|
# define STM32_USART2_DR (STM32_USART2_BASE+STM32_USART_DR_OFFSET)
|
|
# define STM32_USART2_BRR (STM32_USART2_BASE+STM32_USART_BRR_OFFSET)
|
|
# define STM32_USART2_CR1 (STM32_USART2_BASE+STM32_USART_CR1_OFFSET)
|
|
# define STM32_USART2_CR2 (STM32_USART2_BASE+STM32_USART_CR2_OFFSET)
|
|
# define STM32_USART2_CR3 (STM32_USART2_BASE+STM32_USART_CR3_OFFSET)
|
|
# define STM32_USART2_GTPR (STM32_USART2_BASE+STM32_USART_GTPR_OFFSET)
|
|
#endif
|
|
|
|
#if STM32_NUSART > 2
|
|
# define STM32_USART3_SR (STM32_USART3_BASE+STM32_USART_SR_OFFSET)
|
|
# define STM32_USART3_DR (STM32_USART3_BASE+STM32_USART_DR_OFFSET)
|
|
# define STM32_USART3_BRR (STM32_USART3_BASE+STM32_USART_BRR_OFFSET)
|
|
# define STM32_USART3_CR1 (STM32_USART3_BASE+STM32_USART_CR1_OFFSET)
|
|
# define STM32_USART3_CR2 (STM32_USART3_BASE+STM32_USART_CR2_OFFSET)
|
|
# define STM32_USART3_CR3 (STM32_USART3_BASE+STM32_USART_CR3_OFFSET)
|
|
# define STM32_USART3_GTPR (STM32_USART3_BASE+STM32_USART_GTPR_OFFSET)
|
|
#endif
|
|
|
|
#if STM32_NUSART > 3
|
|
# define STM32_UART4_SR (STM32_UART4_BASE+STM32_USART_SR_OFFSET)
|
|
# define STM32_UART4_DR (STM32_UART4_BASE+STM32_USART_DR_OFFSET)
|
|
# define STM32_UART4_BRR (STM32_UART4_BASE+STM32_USART_BRR_OFFSET)
|
|
# define STM32_UART4_CR1 (STM32_UART4_BASE+STM32_USART_CR1_OFFSET)
|
|
# define STM32_UART4_CR2 (STM32_UART4_BASE+STM32_USART_CR2_OFFSET)
|
|
# define STM32_UART4_CR3 (STM32_UART4_BASE+STM32_USART_CR3_OFFSET)
|
|
#endif
|
|
|
|
#if STM32_NUSART > 4
|
|
# define STM32_UART5_SR (STM32_UART5_BASE+STM32_USART_SR_OFFSET)
|
|
# define STM32_UART5_DR (STM32_UART5_BASE+STM32_USART_DR_OFFSET)
|
|
# define STM32_UART5_BRR (STM32_UART5_BASE+STM32_USART_BRR_OFFSET)
|
|
# define STM32_UART5_CR1 (STM32_UART5_BASE+STM32_USART_CR1_OFFSET)
|
|
# define STM32_UART5_CR2 (STM32_UART5_BASE+STM32_USART_CR2_OFFSET)
|
|
# define STM32_UART5_CR3 (STM32_UART5_BASE+STM32_USART_CR3_OFFSET)
|
|
#endif
|
|
|
|
#if STM32_NUSART > 5
|
|
# define STM32_USART6_SR (STM32_USART6_BASE+STM32_USART_SR_OFFSET)
|
|
# define STM32_USART6_DR (STM32_USART6_BASE+STM32_USART_DR_OFFSET)
|
|
# define STM32_USART6_BRR (STM32_USART6_BASE+STM32_USART_BRR_OFFSET)
|
|
# define STM32_USART6_CR1 (STM32_USART6_BASE+STM32_USART_CR1_OFFSET)
|
|
# define STM32_USART6_CR2 (STM32_USART6_BASE+STM32_USART_CR2_OFFSET)
|
|
# define STM32_USART6_CR3 (STM32_USART6_BASE+STM32_USART_CR3_OFFSET)
|
|
# define STM32_USART6_GTPR (STM32_USART6_BASE+STM32_USART_GTPR_OFFSET)
|
|
#endif
|
|
|
|
#if STM32_NUSART > 6
|
|
# define STM32_UART7_SR (STM32_UART7_BASE+STM32_USART_SR_OFFSET)
|
|
# define STM32_UART7_DR (STM32_UART7_BASE+STM32_USART_DR_OFFSET)
|
|
# define STM32_UART7_BRR (STM32_UART7_BASE+STM32_USART_BRR_OFFSET)
|
|
# define STM32_UART7_CR1 (STM32_UART7_BASE+STM32_USART_CR1_OFFSET)
|
|
# define STM32_UART7_CR2 (STM32_UART7_BASE+STM32_USART_CR2_OFFSET)
|
|
# define STM32_UART7_CR3 (STM32_UART7_BASE+STM32_USART_CR3_OFFSET)
|
|
#endif
|
|
|
|
#if STM32_NUSART > 7
|
|
# define STM32_UART8_SR (STM32_UART8_BASE+STM32_USART_SR_OFFSET)
|
|
# define STM32_UART8_DR (STM32_UART8_BASE+STM32_USART_DR_OFFSET)
|
|
# define STM32_UART8_BRR (STM32_UART8_BASE+STM32_USART_BRR_OFFSET)
|
|
# define STM32_UART8_CR1 (STM32_UART8_BASE+STM32_USART_CR1_OFFSET)
|
|
# define STM32_UART8_CR2 (STM32_UART8_BASE+STM32_USART_CR2_OFFSET)
|
|
# define STM32_UART8_CR3 (STM32_UART8_BASE+STM32_USART_CR3_OFFSET)
|
|
#endif
|
|
|
|
/* Register Bitfield Definitions ****************************************************/
|
|
|
|
/* Status register */
|
|
|
|
#define USART_SR_PE (1 << 0) /* Bit 0: Parity Error */
|
|
#define USART_SR_FE (1 << 1) /* Bit 1: Framing Error */
|
|
#define USART_SR_NE (1 << 2) /* Bit 2: Noise Error Flag */
|
|
#define USART_SR_ORE (1 << 3) /* Bit 3: OverRun Error */
|
|
#define USART_SR_IDLE (1 << 4) /* Bit 4: IDLE line detected */
|
|
#define USART_SR_RXNE (1 << 5) /* Bit 5: Read Data Register Not Empty */
|
|
#define USART_SR_TC (1 << 6) /* Bit 6: Transmission Complete */
|
|
#define USART_SR_TXE (1 << 7) /* Bit 7: Transmit Data Register Empty */
|
|
#define USART_SR_LBD (1 << 8) /* Bit 8: LIN Break Detection Flag */
|
|
#define USART_SR_CTS (1 << 9) /* Bit 9: CTS Flag */
|
|
|
|
#define USART_SR_ALLBITS (0x03ff)
|
|
#define USART_SR_CLRBITS (USART_SR_CTS|USART_SR_LBD) /* Cleared by SW write to SR */
|
|
|
|
/* Data register */
|
|
|
|
#define USART_DR_SHIFT (0) /* Bits 8:0: Data value */
|
|
#define USART_DR_MASK (0xff << USART_DR_SHIFT)
|
|
|
|
/* Baud Rate Register */
|
|
|
|
#define USART_BRR_FRAC_SHIFT (0) /* Bits 3-0: fraction of USARTDIV */
|
|
#define USART_BRR_FRAC_MASK (0x0f << USART_BRR_FRAC_SHIFT)
|
|
#define USART_BRR_MANT_SHIFT (4) /* Bits 15-4: mantissa of USARTDIV */
|
|
#define USART_BRR_MANT_MASK (0x0fff << USART_BRR_MANT_SHIFT)
|
|
|
|
/* Control register 1 */
|
|
|
|
#define USART_CR1_SBK (1 << 0) /* Bit 0: Send Break */
|
|
#define USART_CR1_RWU (1 << 1) /* Bit 1: Receiver wakeup */
|
|
#define USART_CR1_RE (1 << 2) /* Bit 2: Receiver Enable */
|
|
#define USART_CR1_TE (1 << 3) /* Bit 3: Transmitter Enable */
|
|
#define USART_CR1_IDLEIE (1 << 4) /* Bit 4: IDLE Interrupt Enable */
|
|
#define USART_CR1_RXNEIE (1 << 5) /* Bit 5: RXNE Interrupt Enable */
|
|
#define USART_CR1_TCIE (1 << 6) /* Bit 6: Transmission Complete Interrupt Enable */
|
|
#define USART_CR1_TXEIE (1 << 7) /* Bit 7: TXE Interrupt Enable */
|
|
#define USART_CR1_PEIE (1 << 8) /* Bit 8: PE Interrupt Enable */
|
|
#define USART_CR1_PS (1 << 9) /* Bit 9: Parity Selection */
|
|
#define USART_CR1_PCE (1 << 10) /* Bit 10: Parity Control Enable */
|
|
#define USART_CR1_WAKE (1 << 11) /* Bit 11: Wakeup method */
|
|
#define USART_CR1_M (1 << 12) /* Bit 12: word length */
|
|
#define USART_CR1_UE (1 << 13) /* Bit 13: USART Enable */
|
|
#define USART_CR1_OVER8 (1 << 15) /* Bit 15: Oversampling mode */
|
|
|
|
#define USART_CR1_ALLINTS (USART_CR1_IDLEIE|USART_CR1_RXNEIE|USART_CR1_TCIE|USART_CR1_PEIE)
|
|
|
|
/* Control register 2 */
|
|
|
|
#define USART_CR2_ADD_SHIFT (0) /* Bits 3-0: Address of the USART node */
|
|
#define USART_CR2_ADD_MASK (0x0f << USART_CR2_ADD_SHIFT)
|
|
#define USART_CR2_LBDL (1 << 5) /* Bit 5: LIN Break Detection Length */
|
|
#define USART_CR2_LBDIE (1 << 6) /* Bit 6: LIN Break Detection Interrupt Enable */
|
|
#define USART_CR2_LBCL (1 << 8) /* Bit 8: Last Bit Clock pulse */
|
|
#define USART_CR2_CPHA (1 << 9) /* Bit 9: Clock Phase */
|
|
#define USART_CR2_CPOL (1 << 10) /* Bit 10: Clock Polarity */
|
|
#define USART_CR2_CLKEN (1 << 11) /* Bit 11: Clock Enable */
|
|
#define USART_CR2_STOP_SHIFT (12) /* Bits 13-12: STOP bits */
|
|
#define USART_CR2_STOP_MASK (3 << USART_CR2_STOP_SHIFT)
|
|
# define USART_CR2_STOP1 (0 << USART_CR2_STOP_SHIFT) /* 00: 1 Stop bit */
|
|
# define USART_CR2_STOP0p5 (1 << USART_CR2_STOP_SHIFT) /* 01: 0.5 Stop bit */
|
|
# define USART_CR2_STOP2 (2 << USART_CR2_STOP_SHIFT) /* 10: 2 Stop bits */
|
|
# define USART_CR2_STOP1p5 (3 << USART_CR2_STOP_SHIFT) /* 11: 1.5 Stop bit */
|
|
#define USART_CR2_LINEN (1 << 14) /* Bit 14: LIN mode enable */
|
|
|
|
/* Control register 3 */
|
|
|
|
#define USART_CR3_EIE (1 << 0) /* Bit 0: Error Interrupt Enable */
|
|
#define USART_CR3_IREN (1 << 1) /* Bit 1: IrDA mode Enable */
|
|
#define USART_CR3_IRLP (1 << 2) /* Bit 2: IrDA Low-Power */
|
|
#define USART_CR3_HDSEL (1 << 3) /* Bit 3: Half-Duplex Selection */
|
|
#define USART_CR3_NACK (1 << 4) /* Bit 4: Smartcard NACK enable */
|
|
#define USART_CR3_SCEN (1 << 5) /* Bit 5: Smartcard mode enable */
|
|
#define USART_CR3_DMAR (1 << 6) /* Bit 6: DMA Enable Receiver */
|
|
#define USART_CR3_DMAT (1 << 7) /* Bit 7: DMA Enable Transmitter */
|
|
#define USART_CR3_RTSE (1 << 8) /* Bit 8: RTS Enable */
|
|
#define USART_CR3_CTSE (1 << 9) /* Bit 9: CTS Enable */
|
|
#define USART_CR3_CTSIE (1 << 10) /* Bit 10: CTS Interrupt Enable */
|
|
#define USART_CR1_ONEBIT (1 << 11) /* Bit 11: One sample bit method enable */
|
|
|
|
/* Guard time and prescaler register */
|
|
|
|
#define USART_GTPR_PSC_SHIFT (0) /* Bits 0-7: Prescaler value */
|
|
#define USART_GTPR_PSC_MASK (0xff << USART_GTPR_PSC_SHIFT)
|
|
#define USART_GTPR_GT_SHIFT (8) /* Bits 8-15: Guard time value */
|
|
#define USART_GTPR_GT_MASK (0xff << USART_GTPR_GT_SHIFT)
|
|
|
|
/* Compatibility definitions ********************************************************/
|
|
/* F3 Transmit/Read registers */
|
|
|
|
#define STM32_USART_RDR_OFFSET STM32_USART_DR_OFFSET /* Receive data register */
|
|
#define STM32_USART_TDR_OFFSET STM32_USART_DR_OFFSET /* Transmit data register */
|
|
|
|
/************************************************************************************
|
|
* Public Types
|
|
************************************************************************************/
|
|
|
|
/************************************************************************************
|
|
* Public Data
|
|
************************************************************************************/
|
|
|
|
/************************************************************************************
|
|
* Public Functions
|
|
************************************************************************************/
|
|
|
|
#endif /* __ARCH_ARM_STC_STM32_CHIP_STM32F40XXX_UART_H */
|