sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
1c61bb0c53
nuttx/arch/arm/src/kinetis/kinetis_usbotg.h
patacongo 7a9457bb07 Email address change in nuttx/ 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5145 42af7a65-404d-4744-a932-0658087f49c3
2012-09-13 18:32:24 +00:00

329 lines
20 KiB
C
Raw Blame History

/********************************************************************************************
* arch/arm/src/kinetis/kinetis_usbotg.h
*
* Copyright (C) 2011 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
********************************************************************************************/
#ifndef __ARCH_ARM_SRC_KINETIS_KINETIS_USBOTG_H
#define __ARCH_ARM_SRC_KINETIS_KINETIS_USBOTG_H
/********************************************************************************************
* Included Files
********************************************************************************************/
#include <nuttx/config.h>
#include "chip.h"
/********************************************************************************************
* Pre-processor Definitions
********************************************************************************************/
/* Register Offsets *************************************************************************/
#define KINETIS_USB_PERID_OFFSET 0x0000 /* Peripheral ID Register */
#define KINETIS_USB_IDCOMP_OFFSET 0x0004 /* Peripheral ID Complement Register */
#define KINETIS_USB_REV_OFFSET 0x0008 /* Peripheral Revision Register */
#define KINETIS_USB_ADDINFO_OFFSET 0x000c /* Peripheral Additional Info Register */
#define KINETIS_USB_OTGISTAT_OFFSET 0x0010 /* OTG Interrupt Status Register */
#define KINETIS_USB_OTGICR_OFFSET 0x0014 /* OTG Interrupt Control Register */
#define KINETIS_USB_OTGSTAT_OFFSET 0x0018 /* OTG Status Register */
#define KINETIS_USB_OTGCTL_OFFSET 0x001c /* OTG Control Register */
#define KINETIS_USB_ISTAT_OFFSET 0x0080 /* Interrupt Status Register */
#define KINETIS_USB_INTEN_OFFSET 0x0084 /* Interrupt Enable Register */
#define KINETIS_USB_ERRSTAT_OFFSET 0x0088 /* Error Interrupt Status Register */
#define KINETIS_USB_ERREN_OFFSET 0x008c /* Error Interrupt Enable Register */
#define KINETIS_USB_STAT_OFFSET 0x0090 /* Status Register */
#define KINETIS_USB_CTL_OFFSET 0x0094 /* Control Register */
#define KINETIS_USB_ADDR_OFFSET 0x0098 /* Address Register */
#define KINETIS_USB_BDTPAGE1_OFFSET 0x009c /* BDT Page Register 1 */
#define KINETIS_USB_FRMNUML_OFFSET 0x00a0 /* Frame Number Register Low */
#define KINETIS_USB_FRMNUMH_OFFSET 0x00a4 /* Frame Number Register High */
#define KINETIS_USB_TOKEN_OFFSET 0x00a8 /* Token Register */
#define KINETIS_USB_SOFTHLD_OFFSET 0x00ac /* SOF Threshold Register */
#define KINETIS_USB_BDTPAGE2_OFFSET 0x00b0 /* BDT Page Register 2 */
#define KINETIS_USB_BDTPAGE3_OFFSET 0x00b4 /* BDT Page Register 3 */
#define KINETIS_USB_ENDPT_OFFSET(n) (0x00c0+((n)<<2)) /* Endpoint n Control Register */
#define KINETIS_USB_ENDPT0_OFFSET 0x00c0 /* Endpoint 0 Control Register */
#define KINETIS_USB_ENDPT1_OFFSET 0x00c4 /* Endpoint 1 Control Register */
#define KINETIS_USB_ENDPT2_OFFSET 0x00c8 /* Endpoint 2 Control Register */
#define KINETIS_USB_ENDPT3_OFFSET 0x00cc /* Endpoint 3 Control Register */
#define KINETIS_USB_ENDPT4_OFFSET 0x00d0 /* Endpoint 4 Control Register */
#define KINETIS_USB_ENDPT5_OFFSET 0x00d4 /* Endpoint 5 Control Register */
#define KINETIS_USB_ENDPT6_OFFSET 0x00d8 /* Endpoint 6 Control Register */
#define KINETIS_USB_ENDPT7_OFFSET 0x00dc /* Endpoint 7 Control Register */
#define KINETIS_USB_ENDPT8_OFFSET 0x00e0 /* Endpoint 8 Control Register */
#define KINETIS_USB_ENDPT9_OFFSET 0x00e4 /* Endpoint 9 Control Register */
#define KINETIS_USB_ENDPT10_OFFSET 0x00e8 /* Endpoint 10 Control Register */
#define KINETIS_USB_ENDPT11_OFFSET 0x00ec /* Endpoint 11 Control Register */
#define KINETIS_USB_ENDPT12_OFFSET 0x00f0 /* Endpoint 12 Control Register */
#define KINETIS_USB_ENDPT13_OFFSET 0x00f4 /* Endpoint 13 Control Register */
#define KINETIS_USB_ENDPT14_OFFSET 0x00f8 /* Endpoint 14 Control Register */
#define KINETIS_USB_ENDPT15_OFFSET 0x00fc /* Endpoint 15 Control Register */
#define KINETIS_USB_USBCTRL_OFFSET 0x0100 /* USB Control Register */
#define KINETIS_USB_OBSERVE_OFFSET 0x0104 /* USB OTG Observe Register */
#define KINETIS_USB_CONTROL_OFFSET 0x0108 /* USB OTG Control Register */
#define KINETIS_USB_USBTRC0_OFFSET 0x010c /* USB Transceiver Control Register 0 */
/* Register Addresses ***********************************************************************/
#define KINETIS_USB0_PERID (KINETIS_USB0_BASE+KINETIS_USB_PERID_OFFSET)
#define KINETIS_USB0_IDCOMP (KINETIS_USB0_BASE+KINETIS_USB_IDCOMP_OFFSET)
#define KINETIS_USB0_REV (KINETIS_USB0_BASE+KINETIS_USB_REV_OFFSET)
#define KINETIS_USB0_ADDINFO (KINETIS_USB0_BASE+KINETIS_USB_ADDINFO_OFFSET)
#define KINETIS_USB0_OTGISTAT (KINETIS_USB0_BASE+KINETIS_USB_OTGISTAT_OFFSET)
#define KINETIS_USB0_OTGICR (KINETIS_USB0_BASE+KINETIS_USB_OTGICR_OFFSET)
#define KINETIS_USB0_OTGSTAT (KINETIS_USB0_BASE+KINETIS_USB_OTGSTAT_OFFSET)
#define KINETIS_USB0_OTGCTL (KINETIS_USB0_BASE+KINETIS_USB_OTGCTL_OFFSET)
#define KINETIS_USB0_ISTAT (KINETIS_USB0_BASE+KINETIS_USB_ISTAT_OFFSET)
#define KINETIS_USB0_INTEN (KINETIS_USB0_BASE+KINETIS_USB_INTEN_OFFSET)
#define KINETIS_USB0_ERRSTAT (KINETIS_USB0_BASE+KINETIS_USB_ERRSTAT_OFFSET)
#define KINETIS_USB0_ERREN (KINETIS_USB0_BASE+KINETIS_USB_ERREN_OFFSET)
#define KINETIS_USB0_STAT (KINETIS_USB0_BASE+KINETIS_USB_STAT_OFFSET)
#define KINETIS_USB0_CTL (KINETIS_USB0_BASE+KINETIS_USB_CTL_OFFSET)
#define KINETIS_USB0_ADDR (KINETIS_USB0_BASE+KINETIS_USB_ADDR_OFFSET)
#define KINETIS_USB0_BDTPAGE1 (KINETIS_USB0_BASE+KINETIS_USB_BDTPAGE1_OFFSET)
#define KINETIS_USB0_FRMNUML (KINETIS_USB0_BASE+KINETIS_USB_FRMNUML_OFFSET)
#define KINETIS_USB0_FRMNUMH (KINETIS_USB0_BASE+KINETIS_USB_FRMNUMH_OFFSET)
#define KINETIS_USB0_TOKEN (KINETIS_USB0_BASE+KINETIS_USB_TOKEN_OFFSET)
#define KINETIS_USB0_SOFTHLD (KINETIS_USB0_BASE+KINETIS_USB_SOFTHLD_OFFSET)
#define KINETIS_USB0_BDTPAGE2 (KINETIS_USB0_BASE+KINETIS_USB_BDTPAGE2_OFFSET)
#define KINETIS_USB0_BDTPAGE3 (KINETIS_USB0_BASE+KINETIS_USB_BDTPAGE3_OFFSET)
#define KINETIS_USB0_ENDPT(n) (KINETIS_USB0_BASE+KINETIS_USB_ENDPT_OFFSET(n))
#define KINETIS_USB0_ENDPT0 (KINETIS_USB0_BASE+KINETIS_USB_ENDPT0_OFFSET)
#define KINETIS_USB0_ENDPT1 (KINETIS_USB0_BASE+KINETIS_USB_ENDPT1_OFFSET)
#define KINETIS_USB0_ENDPT2 (KINETIS_USB0_BASE+KINETIS_USB_ENDPT2_OFFSET)
#define KINETIS_USB0_ENDPT3 (KINETIS_USB0_BASE+KINETIS_USB_ENDPT3_OFFSET)
#define KINETIS_USB0_ENDPT4 (KINETIS_USB0_BASE+KINETIS_USB_ENDPT4_OFFSET)
#define KINETIS_USB0_ENDPT5 (KINETIS_USB0_BASE+KINETIS_USB_ENDPT5_OFFSET)
#define KINETIS_USB0_ENDPT6 (KINETIS_USB0_BASE+KINETIS_USB_ENDPT6_OFFSET)
#define KINETIS_USB0_ENDPT7 (KINETIS_USB0_BASE+KINETIS_USB_ENDPT7_OFFSET)
#define KINETIS_USB0_ENDPT8 (KINETIS_USB0_BASE+KINETIS_USB_ENDPT8_OFFSET)
#define KINETIS_USB0_ENDPT9 (KINETIS_USB0_BASE+KINETIS_USB_ENDPT9_OFFSET)
#define KINETIS_USB0_ENDPT10 (KINETIS_USB0_BASE+KINETIS_USB_ENDPT10_OFFSET)
#define KINETIS_USB0_ENDPT11 (KINETIS_USB0_BASE+KINETIS_USB_ENDPT11_OFFSET)
#define KINETIS_USB0_ENDPT12 (KINETIS_USB0_BASE+KINETIS_USB_ENDPT12_OFFSET)
#define KINETIS_USB0_ENDPT13 (KINETIS_USB0_BASE+KINETIS_USB_ENDPT13_OFFSET)
#define KINETIS_USB0_ENDPT14 (KINETIS_USB0_BASE+KINETIS_USB_ENDPT14_OFFSET)
#define KINETIS_USB0_ENDPT15 (KINETIS_USB0_BASE+KINETIS_USB_ENDPT15_OFFSET)
#define KINETIS_USB0_USBCTRL (KINETIS_USB0_BASE+KINETIS_USB_USBCTRL_OFFSET)
#define KINETIS_USB0_OBSERVE (KINETIS_USB0_BASE+KINETIS_USB_OBSERVE_OFFSET)
#define KINETIS_USB0_CONTROL (KINETIS_USB0_BASE+KINETIS_USB_CONTROL_OFFSET)
#define KINETIS_USB0_USBTRC0 (KINETIS_USB0_BASE+KINETIS_USB_USBTRC0_OFFSET)
/* Register Bit Definitions *****************************************************************/
/* Peripheral ID Register (8-bit) */
/* Bits 6-7: Reserved */
#define USB_PERID_MASK (0x3f) /* Bits 0-5: Peripheral identification bits */
/* Peripheral ID Complement Register (8-bit) */
#define USB_IDCOMP_
/* Bits 6-7: Reserved */
#define USB_IDCOMP_MASK (0x3f) /* Bits 0-5: Ones complement of peripheral identification bits */
/* Peripheral Revision Register (8-bit revision number) */
/* Peripheral Additional Info Register (8-bit) */
#define USB_ADDINFO_IEHOST (1 << 0) /* Bit 0: This bit is set if host mode is enabled */
/* Bits 1-2: Reserved */
#define USB_ADDINFO_IRQNUM_SHIFT (3) /* Bits 3-7: Assigned Interrupt Request Number */
#define USB_ADDINFO_IRQNUM_MASK (31 << USB_ADDINFO_IRQNUM_SHIFT)
/* OTG Interrupt Status Register(8-bit) */
#define USB_OTGISTAT_AVBUSCHG (1 << 0) /* Bit 0: Change in VBUS is detected on an A device */
/* Bit 1: Reserved */
#define USB_OTGISTAT_B_SESS_CHG (1 << 2) /* Bit 2: Change in VBUS is detected on a B device */
#define USB_OTGISTAT_SESSVLDCHG (1 << 3) /* Bit 3: Change in VBUS is detected */
/* Bit 4: Reserved */
#define USB_OTGISTAT_LINE_STATE_CHG (1 << 5) /* Bit 5: Change USB line state */
#define USB_OTGISTAT_ONEMSEC (1 << 6) /* Bit 6: Set when the 1 millisecond timer expires */
#define USB_OTGISTAT_IDCHG (1 << 7) /* Bit 7: Change in ID Signal from the USB connector */
/* OTG Interrupt Control Register (8-bit) */
#define USB_OTGICR_AVBUSEN (1 << 0) /* Bit 0: A VBUS Valid interrupt enable */
/* Bit 1: Reserved */
#define USB_OTGICR_BSESSEN (1 << 2) /* Bit 2: B Session END interrupt enable */
#define USB_OTGICR_SESSVLDEN (1 << 3) /* Bit 3: Session valid interrupt enable */
/* Bit 4: Reserved */
#define USB_OTGICR_LINESTATEEN (1 << 5) /* Bit 5: Line State change interrupt enable */
#define USB_OTGICR_ONEMSECEN (1 << 6) /* Bit 6: 1 millisecond interrupt enable */
#define USB_OTGICR_IDEN (1 << 7) /* Bit 7: ID interrupt enable */
/* OTG Status Register (8-bit) */
#define USB_OTGSTAT_AVBUSVLD (1 << 0) /* Bit 0: A VBUS Valid */
/* Bit 1: Reserved */
#define USB_OTGSTAT_BSESSEND (1 << 2) /* Bit 2: B Session END */
#define USB_OTGSTAT_SESS_VLD (1 << 3) /* Bit 3: Session valid */
/* Bit 4: Reserved */
#define USB_OTGSTAT_LINESTATESTABLE (1 << 5) /* Bit 5: OTGISTAT LINE_STATE_CHG bit stable */
#define USB_OTGSTAT_ONEMSECEN (1 << 6) /* Bit 6: Reserved for the 1msec count */
#define USB_OTGSTAT_ID (1 << 7) /* Bit 7: Current state of the ID pin on the USB connector */
/* OTG Control Register (8-bit) */
/* Bits 0-1: Reserved */
#define USB_OTGCTL_OTGEN (1 << 2) /* Bit 2: On-The-Go pullup/pulldown resistor enable */
/* Bit 3: Reserved */
#define USB_OTGCTL_DMLOW (1 << 4) /* Bit 4: D- Data Line pull-down resistor enable */
#define USB_OTGCTL_DPLOW (1 << 5) /* Bit 5: D+ Data Line pull-down resistor enable */
/* Bit 6: Reserved */
#define USB_OTGCTL_DPHIGH (1 << 7) /* Bit 7: D+ Data Line pullup resistor enable */
/* Interrupt Status Register Interrupt Enable Register (8-bit) */
#define USB_INT_USBRST (1 << 0) /* Bit 0: USB Module has decoded a valid USB reset */
#define USB_INT_ERROR (1 << 1) /* Bit 1: Any of the error conditions within the ERRSTAT register */
#define USB_INT_SOFTOK (1 << 2) /* Bit 2: USB Module received a Start Of Frame (SOF) token */
#define USB_INT_TOKDNE (1 << 3) /* Bit 3: Current token being processed has completed */
#define USB_INT_SLEEP (1 << 4) /* Bit 4: Constant idle on the USB bus for 3 milliseconds */
#define USB_INT_RESUME (1 << 5) /* Bit 5: Signal remote wake-up signaling */
#define USB_INT_ATTACH (1 << 6) /* Bit 6: Attach Interrupt */
#define USB_INT_STALL (1 << 7) /* Bit 7: Stall Interrupt */
/* Error Interrupt Status Register and Error Interrupt Enable Register (8-bit) */
#define USB_ERRSTAT_PIDERR (1 << 0) /* Bit 0: This bit is set when the PID check field fails */
#define USB_ERRSTAT_CRC5EOF (1 << 1) /* Bit 1: Host data CRC error or End of frame errors */
#define USB_ERRSTAT_CRC16 (1 << 2) /* Bit 2: Data packet is rejected due to a CRC16 error */
#define USB_ERRSTAT_DFN8 (1 << 3) /* Bit 3: Data field received was not 8 bits in length */
#define USB_ERRSTAT_BTOERR (1 << 4) /* Bit 4: Bus turnaround timeout error occurred */
#define USB_ERRSTAT_DMAERR (1 << 5) /* Bit 5: DMA error */
/* Bit 6: Reserved */
#define USB_ERRSTAT_BTSERR (1 << 7) /* Bit 7: Bit stuff error is detected */
/* Status Register (8-bit) */
/* Bits 0-1: Reserved */
#define USB_STAT_ODD (1 << 2) /* Bit 2: Last Buffer Descriptor was in the odd bank of the BDT */
#define USB_STAT_TX (1 << 3) /* Bit 3: Transmit Indicator */
#define USB_STAT_ENDP_SHIFT (4) /* Bits 4-7: Endpoint address that received or transmitted the token */
#define USB_STAT_ENDP_MASK (15 << USB_STAT_ENDP_SHIFT)
/* Control Register (8-bit) */
#define USB_CTL_USBENSOFEN (1 << 0) /* Bit 0: USB Enable */
#define USB_CTL_ODDRST (1 << 1) /* Bit 1: Resets all the BDT ODD ping/pong bits to 0 */
#define USB_CTL_RESUME (1 << 2) /* Bit 2: Enables the USB Module to execute resume signaling */
#define USB_CTL_HOSTMODEEN (1 << 3) /* Bit 3: Enables the USB Module to operate in Host mode */
#define USB_CTL_RESET (1 << 4) /* Bit 4: Enables the USB Module to generate USB reset signaling */
#define USB_CTL_TXSUSPENDTOKENBUSY (1 << 5) /* Bit 5: USB Module is busy executing a USB token */
#define USB_CTL_SE0 (1 << 6) /* Bit 6: Live USB Single Ended Zero signal */
#define USB_CTL_JSTATE (1 << 7) /* Bit 7: Live USB differential receiver JSTATE signal */
/* Address Register (8-bit) */
#define USB_ADDR_LSEN (1 << 7) /* Bit 7: Low Speed Enable bit */
#define USB_ADDR_SHIFT (0) /* Bits 0-6: USB address */
#define USB_ADDR_MASK (0x7f << USB_ADDR_SHIFT)
/* BDT Page Register 1 (8-bit) */
/* Bit 0: Reserved */
#define USB_BDTPAGE1_SHIFT (1) /* Bits 1-7: Address bits 9-15 of the BDT base address */
#define USB_BDTPAGE1_MASK (0x7f << USB_BDTPAGE1_SHIFT)
/* Frame Number Register Low (8-bit, bits 0-7 of the 11 bit frame number) */
/* Frame Number Register High (8-bit) */
/* Bits 3-7: Reserved */
#define USB_FRMNUMH_SHIFT (0) /* Bits 0-2: Bits 8-10 of the 11-bit frame number */
#define USB_FRMNUMH_MASK (7 << USB_FRMNUMH_SHIFT)
/* Token Register (8-bit) */
#define USB_TOKEN_ENDPT_SHIFT (0) /* Bits 0-3: Endpoint address for the token command */
#define USB_TOKEN_ENDPT_MASK (15 << USB_TOKEN_ENDPT_SHIFT)
#define USB_TOKEN_PID_SHIFT (4) /* Bits 4-7: Token type executed by the USB Module */
#define USB_TOKEN_PID_MASK (15 << USB_TOKEN_PID_SHIFT)
# define USB_TOKEN_PID_OUT (1 << USB_TOKEN_PID_SHIFT) /* OUT Token */
# define USB_TOKEN_PID_IN (9 << USB_TOKEN_PID_SHIFT) /* IN Token */
# define USB_TOKEN_PID_SETUP (13 << USB_TOKEN_PID_SHIFT) /* SETUP Token */
/* SOF Threshold Register (8-bit count value) */
/* BDT Page Register 2/3 (16 bit address in two 8-bit registers) */
/* Endpoint n Control Register (8-bit) */
#define USB_ENDPT_EPHSHK (1 << 0) /* Bit 0: Enable handshaking during a transaction to the endpoint */
#define USB_ENDPT_EPSTALL (1 << 1) /* Bit 1: Endpoint is stalled */
#define USB_ENDPT_EPTXEN (1 << 2) /* Bit 2: Enable the endpoint for TX transfers */
#define USB_ENDPT_EPRXEN (1 << 3) /* Bit 3: Enable the endpoint for RX transfers */
#define USB_ENDPT_EPCTLDIS (1 << 4) /* Bit 4: Disable control (SETUP) transfers */
/* Bit 5: Reserved */
#define USB_ENDPT_RETRYDIS (1 << 6) /* Bit 6: Disable host retry NAK'ed transactions (host EP0) */
#define USB_ENDPT_HOSTWOHUB (1 << 7) /* Bit 7: Allows the host to communicate to a low speed device (host EP0) */
/* USB Control Register (8-bit) */
/* Bits 0-5: Reserved */
#define USB_USBCTRL_PDE (1 << 6) /* Bit 6: Enables the weak pulldowns on the USB transceiver */
#define USB_USBCTRL_SUSP (1 << 7) /* Bit 7: Places the USB transceiver into the suspend state */
/* USB OTG Observe Register (8-bit) */
/* Bits 0-3: Reserved */
#define USB_OBSERVE_DMPD (1 << 4) /* Bit 4: D- Pull Down signal output from the USB OTG module */
/* Bit 5: Reserved */
#define USB_OBSERVE_DPPD (1 << 6) /* Bit 6: D+ Pull Down signal output from the USB OTG module */
#define USB_OBSERVE_DPPU (1 << 7) /* Bit 7: D+ Pull Up signal output from the USB OTG module */
/* USB OTG Control Register (8-bit) */
/* Bits 0-3: Reserved */
#define USB_CONTROL_DPPULLUPNONOTG (1 << 4) /* Bit 4: Controls of the DP PULLUP in the USB OTG module */
/* Bits 5-7: Reserved */
/* USB Transceiver Control Register 0 (8-bit) */
#define USB_USBTRC0_USBRESET (1 << 7) /* Bit 7: USB reset */
/* Bit 6: Reserved */
#define USB_USBTRC0_USBRESMEN (1 << 5) /* Bit 5: Asynchronous Resume Interrupt Enable */
/* Bits 2-4: Reserved */
#define USB_USBTRC0_SYNC_DET (1 << 1) /* Bit 1: Synchronous USB Interrupt Detect */
#define USB_USBTRC0_RESUME_INT (1 << 0) /* Bit 0: USB Asynchronous Interrupt */
/********************************************************************************************
* Public Types
********************************************************************************************/
/********************************************************************************************
* Public Data
********************************************************************************************/
/********************************************************************************************
* Public Functions
********************************************************************************************/
#endif /* __ARCH_ARM_SRC_KINETIS_KINETIS_USBOTG_H */
Reference in New Issue View Git Blame Copy Permalink