sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
1c8d0bfdc7
nuttx/net/netlink/netlink.h
wangyingdong 84f326a66b Fix the bug that netlink receive wait does not hang up 
Signed-off-by: wangyingdong <wangyingdong@xiaomi.com>
2024-09-19 03:19:15 +08:00

652 lines
22 KiB
C
Raw Blame History

/****************************************************************************
* net/netlink/netlink.h
*
* SPDX-License-Identifier: Apache-2.0
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership. The
* ASF licenses this file to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance with the
* License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
* License for the specific language governing permissions and limitations
* under the License.
*
****************************************************************************/
#ifndef __NET_NETLINK_NETLINK_H
#define __NET_NETLINK_NETLINK_H
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <sys/types.h>
#include <poll.h>
#include <netpacket/netlink.h>
#include <nuttx/queue.h>
#include <nuttx/net/icmpv6.h>
#include <nuttx/net/netlink.h>
#include <nuttx/semaphore.h>
#include <nuttx/wqueue.h>
#include "devif/devif.h"
#include "socket/socket.h"
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
#ifndef CONFIG_NETLINK_ROUTE
# define netlink_device_notify(dev)
# define netlink_device_notify_ipaddr(dev, type, domain, addr, preflen)
# define netlink_route_notify(route, type, domain)
# define netlink_neigh_notify(neigh, type, domain)
# define netlink_ipv6_prefix_notify(dev, type, pinfo)
#endif
#ifdef CONFIG_NET_NETLINK
/* nla_for_each_attr - iterate over a stream of attributes
* pos: loop counter, set to current attribute
* head: head of attribute stream
* len: length of attribute stream
* rem: initialized to len, holds bytes currently remaining in stream
*/
#define nla_for_each_attr(pos, head, len, rem) \
for (pos = head, rem = len; nla_ok(pos, rem); \
pos = nla_next(pos, &(rem)))
/* Always use this macro, this allows later putting the
* message into a separate section or such for things
* like translation or listing all possible messages.
* Currently string formatting is not supported (due
* to the lack of an output buffer.)
*/
#define nl_set_err_msg_attr(extack, attr, msg) \
do \
{ \
static const char __msg[] = (msg); \
FAR struct netlink_ext_ack *__extack = (extack); \
if (__extack) \
{ \
__extack->_msg = __msg; \
__extack->bad_attr = (attr); \
} \
} \
while (0)
/* nla_data - head of payload
* nla: netlink attribute
*/
#define nla_data(nla) ((FAR void *)((FAR char *)(nla) + NLA_HDRLEN))
/* nla_len - length of payload
* nla: netlink attribute
*/
#define nla_len(nla) ((nla)->nla_len - NLA_HDRLEN)
/* nla_type - attribute type
* nla: netlink attribute
*/
#define nla_type(nla) ((nla)->nla_type & NLA_TYPE_MASK)
/* nla_ok - check if the netlink attribute fits into the remaining bytes
* nla: netlink attribute
* remaining: number of bytes remaining in attribute stream
*/
#define nla_ok(nla, remaining) \
((remaining) >= sizeof(*(nla)) && \
(nla)->nla_len >= sizeof(*(nla)) && \
(nla)->nla_len <= (remaining))
/* nlmsg_msg_size - length of netlink message not including padding
* payload: length of message payload
*/
#define nlmsg_msg_size(payload) (NLMSG_HDRLEN + (payload))
/* nlmsg_len - length of message payload
* nlh: netlink message header
*/
#define nlmsg_len(nlh) ((nlh)->nlmsg_len - NLMSG_HDRLEN)
/* nlmsg_attrlen - length of attributes data
* nlh: netlink message header
* hdrlen: length of family specific header
*/
#define nlmsg_attrlen(nlh, hdrlen) (nlmsg_len(nlh) - NLMSG_ALIGN(hdrlen))
/* nlmsg_data - head of message payload
* nlh: netlink message header
*/
#define nlmsg_data(nlh) ((FAR void *)((FAR char *)(nlh) + NLMSG_HDRLEN))
/* nla_get_in_addr - return payload of IPv4 address attribute
* nla: IPv4 address netlink attribute
*/
#define nla_get_in_addr(nla) (*(FAR uint32_t *)nla_data(nla))
/* nlmsg_attrdata - head of attributes data
* nlh: netlink message header
* hdrlen: length of family specific header
*/
#define nlmsg_attrdata(nlh, hdrlen) \
((FAR struct nlattr *)((FAR char *)nlmsg_data(nlh) + NLMSG_ALIGN(hdrlen)))
/* nlmsg_parse - parse attributes of a netlink message
* nlh: netlink message header
* hdrlen: length of family specific header
* tb: destination array with maxtype+1 elements
* maxtype: maximum attribute type to be expected
* policy: validation policy
* extack: extended ACK report struct
*
* See nla_parse()
*/
#define nlmsg_parse(nlh, hdrlen, tb, maxtype, policy, extack) \
((nlh)->nlmsg_len < nlmsg_msg_size(hdrlen) ? -EINVAL : \
nla_parse(tb, maxtype, nlmsg_attrdata(nlh, hdrlen), \
nlmsg_attrlen(nlh, hdrlen), policy, extack))
/* this can be increased when necessary - don't expose to userland */
#define NETLINK_MAX_COOKIE_LEN 20
/****************************************************************************
* Public Type Definitions
****************************************************************************/
/* This connection structure describes the underlying state of the socket. */
struct netlink_conn_s
{
/* Common prologue of all connection structures. */
struct socket_conn_s sconn;
/* NetLink-specific content follows */
uint32_t pid; /* Port ID (if bound) */
uint32_t groups; /* Multicast groups mask (if bound) */
uint32_t dst_pid; /* Destination port ID */
uint32_t dst_groups; /* Destination multicast groups mask */
uint8_t crefs; /* Reference counts on this instance */
/* poll() support */
int key; /* used to cancel notifications */
FAR struct pollfd *fds; /* Used to wakeup poll() */
/* Queued response data */
sq_queue_t resplist; /* Singly linked list of responses */
};
/* Standard attribute types to specify validation policy */
enum
{
NLA_UNSPEC,
NLA_U8,
NLA_U16,
NLA_U32,
NLA_U64,
NLA_STRING,
NLA_FLAG,
NLA_MSECS,
NLA_NESTED,
NLA_NESTED_COMPAT,
NLA_NUL_STRING,
NLA_BINARY,
NLA_S8,
NLA_S16,
NLA_S32,
NLA_S64,
NLA_BITFIELD32,
NLA_TYPE_MAX = NLA_BITFIELD32,
};
/* struct netlink_ext_ack - netlink extended ACK report struct
* _msg: message string to report - don't access directly, use
* nl_set_err_msg_attr
* bad_attr: attribute with error
* cookie: cookie data to return to userspace (for success)
* cookie_len: actual cookie data length
*/
struct netlink_ext_ack
{
FAR const char *_msg;
FAR const struct nlattr *bad_attr;
uint8_t cookie[NETLINK_MAX_COOKIE_LEN];
uint8_t cookie_len;
};
/* struct nla_policy - attribute validation policy
* type: Type of attribute or NLA_UNSPEC
* len: Type specific length of payload
*
* Policies are defined as arrays of this struct, the array must be
* accessible by attribute type up to the highest identifier to be expected.
*
* Meaning of `len' field:
* NLA_STRING Maximum length of string
* NLA_NUL_STRING Maximum length of string (excluding NUL)
* NLA_FLAG Unused
* NLA_BINARY Maximum length of attribute payload
* NLA_NESTED Don't use `len' field -- length verification is
* done by checking len of nested header (or empty)
* NLA_NESTED_COMPAT Minimum length of structure payload
* NLA_U8, NLA_U16,
* NLA_U32, NLA_U64,
* NLA_S8, NLA_S16,
* NLA_S32, NLA_S64,
* NLA_MSECS Leaving the length field zero will verify the
* given type fits, using it verifies minimum length
* just like "All other"
* NLA_BITFIELD32 A 32-bit bitmap/bitselector attribute
* All other Minimum length of attribute payload
*
* Example:
* static const struct nla_policy my_policy[ATTR_MAX + 1] = {
* [ATTR_FOO] = { .type = NLA_U16 },
* [ATTR_BAR] = { .type = NLA_STRING, .len = BARSIZ },
* [ATTR_BAZ] = { .len = sizeof(struct mystruct) },
* [ATTR_GOO] = { .type = NLA_BITFIELD32, .validation_data =
* &myvalidflags },
* };
*/
struct nla_policy
{
uint16_t type;
uint16_t len;
FAR void *validation_data;
};
/****************************************************************************
* Public Data
****************************************************************************/
#ifdef __cplusplus
# define EXTERN extern "C"
extern "C"
{
#else
# define EXTERN extern
#endif
EXTERN const struct sock_intf_s g_netlink_sockif;
/****************************************************************************
* Name: netlink_initialize()
*
* Description:
* Initialize the NetLink connection structures. Called once and only
* from the networking layer.
*
****************************************************************************/
void netlink_initialize(void);
/****************************************************************************
* Name: netlink_alloc()
*
* Description:
* Allocate a new, uninitialized NetLink connection structure. This is
* normally something done by the implementation of the socket() API
*
****************************************************************************/
FAR struct netlink_conn_s *netlink_alloc(void);
/****************************************************************************
* Name: netlink_free()
*
* Description:
* Free a NetLink connection structure that is no longer in use. This
* should be done by the implementation of close().
*
****************************************************************************/
void netlink_free(FAR struct netlink_conn_s *conn);
/****************************************************************************
* Name: netlink_nextconn()
*
* Description:
* Traverse the list of allocated NetLink connections
*
* Assumptions:
* This function is called from NetLink device logic.
*
****************************************************************************/
FAR struct netlink_conn_s *netlink_nextconn(FAR struct netlink_conn_s *conn);
/****************************************************************************
* Name: netlink_notifier_setup
*
* Description:
* Set up to perform a callback to the worker function the Netlink
* response data is received. The worker function will execute on the low
* priority worker thread.
*
* Input Parameters:
* worker - The worker function to execute on the low priority work
* queue when Netlink response data is available.
* conn - The Netlink connection where the response is expected.
* arg - A user-defined argument that will be available to the worker
* function when it runs.
*
* Returned Value:
* Zero (OK) is returned if the notification was successfully set up.
* A negated error value is returned if an unexpected error occurred
* and no notification will occur.
*
****************************************************************************/
int netlink_notifier_setup(worker_t worker, FAR struct netlink_conn_s *conn,
FAR void *arg);
/****************************************************************************
* Name: netlink_notifier_teardown
*
* Description:
* Eliminate a Netlink response notification previously setup by
* netlink_notifier_setup(). This function should only be called if the
* notification should be aborted prior to the notification. The
* notification will automatically be torn down after the notification.
*
* Input Parameters:
* conn - Teardown the notification for this Netlink connection.
*
****************************************************************************/
void netlink_notifier_teardown(FAR struct netlink_conn_s *conn);
/****************************************************************************
* Name: netlink_notifier_signal
*
* Description:
* New Netlink response data is available. Execute worker thread
* functions for all threads that wait for response data.
*
* Input Parameters:
* conn - The Netlink connection where the response was just buffered.
*
* Returned Value:
* None.
*
****************************************************************************/
void netlink_notifier_signal(FAR struct netlink_conn_s *conn);
/****************************************************************************
* Name: netlink_add_terminator
*
* Description:
* Add one NLMSG_DONE response to handle.
*
* Input Parameters:
* handle - The handle previously provided to the sendto() implementation
* for the protocol. This is an opaque reference to the Netlink
* socket state structure.
* req - The request message header.
* group - The broadcast group index, 0 for normal response.
*
* Returned Value:
* Zero (OK) is returned if the terminator was successfully added to the
* response list.
* A negated error value is returned if an unexpected error occurred.
*
****************************************************************************/
int netlink_add_terminator(NETLINK_HANDLE handle,
FAR const struct nlmsghdr *req, int group);
/****************************************************************************
* Name: netlink_tryget_response
*
* Description:
* Return the next response from the head of the pending response list.
* Responses are returned one-at-a-time in FIFO order.
*
* Note: The network will be momentarily locked to support exclusive
* access to the pending response list.
*
* Returned Value:
* The next response from the head of the pending response list is
* returned. NULL will be returned if the pending response list is
* empty
*
****************************************************************************/
FAR struct netlink_response_s *
netlink_tryget_response(FAR struct netlink_conn_s *conn);
/****************************************************************************
* Name: netlink_get_response
*
* Description:
* Return the next response from the head of the pending response list.
* Responses are returned one-at-a-time in FIFO order.
*
* Note: The network will be momentarily locked to support exclusive
* access to the pending response list.
*
* Input Parameters:
* conn - The Netlink connection
* response - The next response from the head of the pending response list
* is returned. This function will block until a response is
* received if the pending response list is empty. NULL will be
* returned only in the event of a failure.
*
* Returned Value:
* Zero (OK) is returned if the notification was successfully set up.
* A negated error value is returned if an unexpected error occurred
*
****************************************************************************/
int netlink_get_response(FAR struct netlink_conn_s *conn,
FAR struct netlink_response_s **response);
/****************************************************************************
* Name: netlink_check_response
*
* Description:
* Return true is a response is pending now.
*
* Returned Value:
* True: A response is available; False; No response is available.
*
****************************************************************************/
bool netlink_check_response(FAR struct netlink_conn_s *conn);
/****************************************************************************
* Name: netlink_route_sendto()
*
* Description:
* Perform the sendto() operation for the NETLINK_ROUTE protocol.
*
****************************************************************************/
#ifdef CONFIG_NETLINK_ROUTE
ssize_t netlink_route_sendto(NETLINK_HANDLE handle,
FAR const struct nlmsghdr *nlmsg,
size_t len, int flags,
FAR const struct sockaddr_nl *to,
socklen_t tolen);
/****************************************************************************
* Name: netlink_device_notify()
*
* Description:
* Perform the route broadcast for the NETLINK_ROUTE protocol.
*
****************************************************************************/
void netlink_device_notify(FAR struct net_driver_s *dev);
/****************************************************************************
* Name: netlink_device_notify_ipaddr()
*
* Description:
* Perform the route broadcast for the NETLINK_ROUTE protocol.
*
****************************************************************************/
void netlink_device_notify_ipaddr(FAR struct net_driver_s *dev,
int type, int domain,
FAR const void *addr, uint8_t preflen);
/****************************************************************************
* Name: netlink_route_notify
*
* Description:
* Perform the route broadcast for the NETLINK_NETFILTER protocol.
*
* Input Parameters:
* route - The route entry
* type - The type of the message, RTM_*ROUTE
* domain - The domain of the message
*
****************************************************************************/
#if defined CONFIG_NETLINK_DISABLE_GETROUTE
# define netlink_route_notify(route, type, domain)
#else
void netlink_route_notify(FAR const void *route, int type, int domain);
#endif
/****************************************************************************
* Name: netlink_neigh_notify()
*
* Description:
* Perform the neigh broadcast for the NETLINK_ROUTE protocol.
*
* Input Parameters:
* neigh - The ARP entry or neighbour entry
* type - The type of the message, RTM_*NEIGH
* domain - The domain of the message
*
****************************************************************************/
#if defined(CONFIG_NETLINK_DISABLE_GETNEIGH)
# define netlink_neigh_notify(neigh, type, domain)
#else
void netlink_neigh_notify(FAR const void *neigh, int type, int domain);
#endif
/****************************************************************************
* Name: netlink_ipv6_prefix_notify()
*
* Description:
* Perform the RA prefix for the NETLINK_ROUTE protocol.
*
****************************************************************************/
#if defined(CONFIG_NETLINK_DISABLE_NEWPREFIX) || !defined(CONFIG_NET_IPv6)
# define netlink_ipv6_prefix_notify(dev, type, pinfo)
#else
void netlink_ipv6_prefix_notify(FAR struct net_driver_s *dev, int type,
FAR const struct icmpv6_prefixinfo_s *pinfo);
#endif
/****************************************************************************
* Name: nla_next
*
* Description:
* Next netlink attribute in attribute stream.
*
* Input Parameters:
* nla - netlink attribute.
* remaining - number of bytes remaining in attribute stream.
*
* Returned Value:
* Returns the next netlink attribute in the attribute stream and
* decrements remaining by the size of the current attribute.
*
****************************************************************************/
FAR struct nlattr *nla_next(FAR const struct nlattr *nla,
FAR int *remaining);
/****************************************************************************
* Name: nla_parse
*
* Description:
* Parse the nested netlink attribute.
*
****************************************************************************/
int nla_parse(FAR struct nlattr **tb, int maxtype,
FAR const struct nlattr *head,
int len, FAR const struct nla_policy *policy,
FAR struct netlink_ext_ack *extack);
#endif /* CONFIG_NETLINK_ROUTE */
/****************************************************************************
* Name: netlink_netfilter_sendto
*
* Description:
* Perform the sendto() operation for the NETLINK_NETFILTER protocol.
*
****************************************************************************/
#ifdef CONFIG_NETLINK_NETFILTER
ssize_t netlink_netfilter_sendto(NETLINK_HANDLE handle,
FAR const struct nlmsghdr *nlmsg,
size_t len, int flags,
FAR const struct sockaddr_nl *to,
socklen_t tolen);
/****************************************************************************
* Name: netlink_conntrack_notify
*
* Description:
* Perform the conntrack broadcast for the NETLINK_NETFILTER protocol.
*
* Input Parameters:
* type - The type of the message, IPCTNL_MSG_CT_*
* domain - The domain of the message
* nat_entry - The NAT entry
*
****************************************************************************/
void netlink_conntrack_notify(uint8_t type, uint8_t domain,
FAR const void *nat_entry);
#endif /* CONFIG_NETLINK_NETFILTER */
#undef EXTERN
#ifdef __cplusplus
}
#endif
#endif /* CONFIG_NET_NETLINK */
#endif /* __NET_NETLINK_NETLINK_H */
Reference in New Issue View Git Blame Copy Permalink