nuttx/sched/module/mod_procfs.c
Alin Jerpelea eb9030c891 sched: migrate to SPDX identifier
Most tools used for compliance and SBOM generation use SPDX identifiers
This change brings us a step closer to an easy SBOM generation.

Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
2024-09-12 01:10:14 +08:00

313 lines
9.8 KiB
C

/****************************************************************************
* sched/module/mod_procfs.c
*
* SPDX-License-Identifier: Apache-2.0
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership. The
* ASF licenses this file to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance with the
* License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
* License for the specific language governing permissions and limitations
* under the License.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <sys/stat.h>
#include <stdio.h>
#include <stdint.h>
#include <stdbool.h>
#include <string.h>
#include <fcntl.h>
#include <assert.h>
#include <errno.h>
#include <debug.h>
#include <nuttx/kmalloc.h>
#include <nuttx/module.h>
#include <nuttx/lib/modlib.h>
#include <nuttx/fs/fs.h>
#include <nuttx/fs/procfs.h>
#if !defined(CONFIG_DISABLE_MOUNTPOINT) && defined(CONFIG_FS_PROCFS) && \
!defined(CONFIG_FS_PROCFS_EXCLUDE_MODULE)
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
/* Determines the size of an intermediate buffer that must be large enough
* to handle the longest line generated by this logic.
*/
#define MOD_LINELEN 64
/****************************************************************************
* Private Types
****************************************************************************/
/* This structure describes one open "file" */
struct modprocfs_file_s
{
struct procfs_file_s base; /* Base open file structure */
/* Read helpers */
FAR char *buffer; /* User buffer pointer */
size_t buflen; /* Size of the user buffer */
size_t remaining; /* Space remaining in user buffer */
size_t totalsize; /* Total size returned by read() */
off_t offset; /* Offset skip on output */
char line[MOD_LINELEN]; /* Buffer for line formatting */
};
/****************************************************************************
* Private Function Prototypes
****************************************************************************/
/* File system methods */
static int modprocfs_open(FAR struct file *filep,
FAR const char *relpath,
int oflags, mode_t mode);
static int modprocfs_close(FAR struct file *filep);
static ssize_t modprocfs_read(FAR struct file *filep,
FAR char *buffer,
size_t buflen);
static int modprocfs_dup(FAR const struct file *oldp,
FAR struct file *newp);
static int modprocfs_stat(FAR const char *relpath, FAR struct stat *buf);
/****************************************************************************
* Public Data
****************************************************************************/
/* See include/nutts/fs/procfs.h
* We use the old-fashioned kind of initializers so that this will compile
* with any compiler.
*/
const struct procfs_operations g_module_operations =
{
modprocfs_open, /* open */
modprocfs_close, /* close */
modprocfs_read, /* read */
NULL, /* write */
NULL, /* poll */
modprocfs_dup, /* dup */
NULL, /* opendir */
NULL, /* closedir */
NULL, /* readdir */
NULL, /* rewinddir */
modprocfs_stat /* stat */
};
/****************************************************************************
* Private Functions
****************************************************************************/
/****************************************************************************
* Name: modprocfs_callback
****************************************************************************/
static int modprocfs_callback(FAR struct module_s *modp, FAR void *arg)
{
FAR struct modprocfs_file_s *priv;
size_t linesize;
size_t copysize;
DEBUGASSERT(modp != NULL && arg != NULL);
priv = (FAR struct modprocfs_file_s *)arg;
linesize = snprintf(priv->line, MOD_LINELEN,
"%s,%p,%p,%p,%u,%p,%lu,%p,%lu\n",
modp->modname, modp->initializer,
modp->modinfo.uninitializer, modp->modinfo.arg,
modp->modinfo.nexports,
modp->textalloc,
(unsigned long)modp->textsize,
(FAR uint8_t *)modp->dataalloc,
(unsigned long)modp->datasize);
copysize = procfs_memcpy(priv->line, linesize, priv->buffer,
priv->remaining, &priv->offset);
priv->totalsize += copysize;
priv->buffer += copysize;
priv->remaining -= copysize;
return priv->totalsize >= priv->buflen;
}
/****************************************************************************
* Name: modprocfs_open
****************************************************************************/
static int modprocfs_open(FAR struct file *filep, FAR const char *relpath,
int oflags, mode_t mode)
{
FAR struct modprocfs_file_s *priv;
finfo("Open '%s'\n", relpath);
/* PROCFS is read-only. Any attempt to open with any kind of write
* access is not permitted.
*
* REVISIT: Write-able proc files could be quite useful.
*/
if (((oflags & O_WRONLY) != 0 || (oflags & O_RDONLY) == 0))
{
ferr("ERROR: Only O_RDONLY supported\n");
return -EACCES;
}
/* Allocate the open file structure */
priv = (FAR struct modprocfs_file_s *)
kmm_zalloc(sizeof(struct modprocfs_file_s));
if (!priv)
{
ferr("ERROR: Failed to allocate file attributes\n");
return -ENOMEM;
}
/* Save the open file structure as the open-specific state in
* filep->f_priv.
*/
filep->f_priv = priv;
return OK;
}
/****************************************************************************
* Name: modprocfs_close
****************************************************************************/
static int modprocfs_close(FAR struct file *filep)
{
FAR struct modprocfs_file_s *priv;
/* Recover our private data from the struct file instance */
priv = (FAR struct modprocfs_file_s *)filep->f_priv;
DEBUGASSERT(priv);
/* Release the file attributes structure */
kmm_free(priv);
filep->f_priv = NULL;
return OK;
}
/****************************************************************************
* Name: modprocfs_read
****************************************************************************/
static ssize_t modprocfs_read(FAR struct file *filep, FAR char *buffer,
size_t buflen)
{
FAR struct modprocfs_file_s *priv;
int ret;
finfo("buffer=%p buflen=%zu\n", buffer, buflen);
/* Recover our private data from the struct file instance */
priv = (FAR struct modprocfs_file_s *)filep->f_priv;
DEBUGASSERT(priv);
/* Traverse all installed modules */
priv->remaining = buflen;
priv->totalsize = 0;
priv->buffer = buffer;
priv->buflen = buflen;
priv->offset = filep->f_pos;
ret = modlib_registry_foreach(modprocfs_callback, priv);
if (ret >= 0)
{
filep->f_pos += priv->totalsize;
return priv->totalsize;
}
return ret;
}
/****************************************************************************
* Name: modprocfs_dup
*
* Description:
* Duplicate open file data in the new file structure.
*
****************************************************************************/
static int modprocfs_dup(FAR const struct file *oldp, FAR struct file *newp)
{
FAR struct modprocfs_file_s *oldpriv;
FAR struct modprocfs_file_s *newpriv;
finfo("Dup %p->%p\n", oldp, newp);
/* Recover our private data from the old struct file instance */
oldpriv = (FAR struct modprocfs_file_s *)oldp->f_priv;
DEBUGASSERT(oldpriv);
/* Allocate a new container to hold the task and attribute selection */
newpriv = (FAR struct modprocfs_file_s *)
kmm_zalloc(sizeof(struct modprocfs_file_s));
if (!newpriv)
{
ferr("ERROR: Failed to allocate file attributes\n");
return -ENOMEM;
}
/* The copy the file attributes from the old attributes to the new */
memcpy(newpriv, oldpriv, sizeof(struct modprocfs_file_s));
/* Save the new attributes in the new file structure */
newp->f_priv = newpriv;
return OK;
}
/****************************************************************************
* Name: modprocfs_stat
*
* Description: Return information about a file or directory
*
****************************************************************************/
static int modprocfs_stat(FAR const char *relpath, FAR struct stat *buf)
{
memset(buf, 0, sizeof(struct stat));
buf->st_mode = S_IFREG | S_IROTH | S_IRGRP | S_IRUSR;
return OK;
}
/****************************************************************************
* Public Functions
****************************************************************************/
#endif /* !CONFIG_DISABLE_MOUNTPOINT && CONFIG_FS_PROCFS &&
* !CONFIG_FS_PROCFS_EXCLUDE_MODULE */