nuttx/boards/arm/stm32u5/b-u585i-iot02a/scripts/tfm-ns.ld
Michael Jung 6086f42bfb b-u585i-iot02a: Board Support
Support for the STMicroelectronics B-U585I-IOT02A development board. This
is a proof-of-concept port that demonstrates running NuttX as the
Non-Secure TrustZone domain companion to TrustedFirmware-M.

Signed-off-by: Michael Jung <mijung@gmx.net>
2022-02-13 16:32:35 +08:00

115 lines
3.4 KiB
Plaintext

/****************************************************************************
* boards/arm/stm32u5/b-u585i-iot02a/scripts/tfm-ns.ld
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership. The
* ASF licenses this file to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance with the
* License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
* License for the specific language governing permissions and limitations
* under the License.
*
****************************************************************************/
/* This linker script supports running NuttX in the 'Non-Secure' (ns) domain
* in conjunction with TrustedFirmware-M (tfm).
*
* NuttX will run as the 'Non secure application' in the 'Non-Secure image
* primary primary slot Area 1' in internal flash. Compare [UM2851],
* Figure 7. Furthermore, see Figure 18 for the SRAM1 area used for 'Non-
* Secure application volatile data'
*
* While the 'Non-Secure Image primary slot Area 1' is actually 640KiB large
* in the referenced setup, the image will be enriched with a header of 0x400
* bytes and a trailer of 0x2000 bytes. Thus the 'flash' statement in the
* MEMORY definition below.
*
* References
* [UM2851] STMicroelectronics. UM2851: Getting started with STM32CubeU5 TFM
* application, Rev 1, June 2021
*/
MEMORY
{
flash (rx) : ORIGIN = 0x08052400, LENGTH = 0x9DC00
sram (rwx) : ORIGIN = 0x20000000, LENGTH = 192K
}
OUTPUT_ARCH(arm)
ENTRY(_stext)
SECTIONS
{
.text : {
_stext = ABSOLUTE(.);
*(.vectors)
*(.text .text.*)
*(.fixup)
*(.gnu.warning)
*(.rodata .rodata.*)
*(.gnu.linkonce.t.*)
*(.glue_7)
*(.glue_7t)
*(.got)
*(.gcc_except_table)
*(.gnu.linkonce.r.*)
_etext = ABSOLUTE(.);
} > flash
.init_section : {
_sinit = ABSOLUTE(.);
*(.init_array .init_array.*)
_einit = ABSOLUTE(.);
} > flash
.ARM.extab : {
*(.ARM.extab*)
} > flash
__exidx_start = ABSOLUTE(.);
.ARM.exidx : {
*(.ARM.exidx*)
} > flash
__exidx_end = ABSOLUTE(.);
_eronly = ABSOLUTE(.);
.data : {
_sdata = ABSOLUTE(.);
*(.data .data.*)
*(.gnu.linkonce.d.*)
CONSTRUCTORS
. = ALIGN(4);
_edata = ABSOLUTE(.);
} > sram AT > flash
.bss : {
_sbss = ABSOLUTE(.);
*(.bss .bss.*)
*(.gnu.linkonce.b.*)
*(COMMON)
. = ALIGN(4);
_ebss = ABSOLUTE(.);
} > sram
/* Stabs debugging sections. */
.stab 0 : { *(.stab) }
.stabstr 0 : { *(.stabstr) }
.stab.excl 0 : { *(.stab.excl) }
.stab.exclstr 0 : { *(.stab.exclstr) }
.stab.index 0 : { *(.stab.index) }
.stab.indexstr 0 : { *(.stab.indexstr) }
.comment 0 : { *(.comment) }
.debug_abbrev 0 : { *(.debug_abbrev) }
.debug_info 0 : { *(.debug_info) }
.debug_line 0 : { *(.debug_line) }
.debug_pubnames 0 : { *(.debug_pubnames) }
.debug_aranges 0 : { *(.debug_aranges) }
}