nuttx

History

YAMAMOTO Takashi 1ffa009c8b Revert "Don't generate .depend anymore"

This reverts commit 79af7fbf4ef0185fa501e23a900a2ad933f845a7.

Because:

* btashton reported some issues in local builds:

  https://github.com/apache/incubator-nuttx/pull/603#issuecomment-602264860

* this might be related to the current CI breakage:

  > /bin/sh: 1: /__w/incubator-nuttx/incubator-nuttx/nuttx/tools/mkdeps: not found

2020-03-22 23:07:29 -05:00

configs/nsh

boards/arm/stm32/axoloti: Every BSP must provide boot board_late_initialize() AND board_app_initialize(). That is because you never now how the configuration will be set. CONFIG_LIB_BOARDCTL may be auto-selected by applications that need boardctl() support... requiring the existence of board_app_initialize().

2019-10-26 17:45:45 -06:00

include

…

scripts

Run codespell -w with the latest dictonary again

2020-02-23 22:27:46 +01:00

src

Revert "Don't generate .depend anymore"

2020-03-22 23:07:29 -05:00

Kconfig

…

README.txt

…

README.txt

README
======

This README discusses issues unique to NuttX configurations for the
Axoloti open source synthesizer board featuring the STM32F427IGH6
MCU. The STM32F427IGH6 has a 180MHz Cortex-M4 core with 1MiB Flash
memory and 256KiB of SRAM. The board features:

  - ADAU1961 24-bit 96 kHz stereo CODEC
  - 1/4" in/out jacks for analog audio signals
  - 3.5 mm jack for analog audio signals
  - 8 MiB of SDRAM (Alliance Memory AS4C4M16SA)
  - Serial MIDI in/out ports
  - SD Card slot
  - Two user LEDs and one (GPIO) push-button
  - USB OTG FS with Micro-AB connector (USB device mode operation)
  - USB OTG HS with Type-A connector (USB host mode operation)
  - Easy access to most IO pins

Refer to http://www.axoloti.com/ for further information about this board.