nuttx/net/socket/net_fstat.c
Xiang Xiao c1b0aa118c Remove psock_send and sockfd_socket from net/socket/socket.h
Since both is already declared in include/nuttx/net/net.h and fix other minor issue in network socket layer.
2020-01-31 13:45:15 -06:00

190 lines
6.2 KiB
C

/****************************************************************************
* net/socket/net_fstat.c
*
* Copyright (C) 2018 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <sys/stat.h>
#include <string.h>
#include <errno.h>
#include <debug.h>
#include <nuttx/net/net.h>
#include <nuttx/net/netdev.h>
#include "tcp/tcp.h"
#include "udp/udp.h"
#include "socket/socket.h"
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: net_fstat
*
* Description:
* Performs fstat operations on socket
*
* Input Parameters:
* sockfd - Socket descriptor of the socket to operate on
* buf - Caller-provided location in which to return the fstat data
*
* Returned Value:
* Zero (OK) is returned on success; a negated errno value is returned on
* any failure to indicate the nature of the failure.
*
****************************************************************************/
int net_fstat(int sockfd, FAR struct stat *buf)
{
FAR struct socket *psock;
int ret = OK;
/* Get the underlying socket structure */
psock = sockfd_socket(sockfd);
if (psock == NULL)
{
/* sockfd does not refer to a valid, open socket */
return -EBADF;
}
/* Return fstat data. The st_mode and st_blksize fields are the only
* fields set for socket descriptors. The st_mode field is set to a value
* that indicates the descriptor is a socket descriptor and the st_blksize
* field is set to an optimal value determined by the system. The optimal
* packet size is the MSS.
*/
memset(buf, 0, sizeof(struct stat));
buf->st_mode = S_IFSOCK;
/* The socket must be open and in a connected state in order to get the
* MSS. There may be multiple networks served by different network
* devices, each supporting a different MSS.
*/
if (psock->s_conn == NULL || !_SS_ISCONNECTED(psock->s_flags))
{
/* Not connected.. Return an optimal blocksize of zero (or, perhaps,
* even an error?)
*
* REVISIT: The concept of connected only applies to TCP and UDP
* sockets. Other sockets, such raw radio sockets, have no such
* concept.
*/
nwarn("WARNING: Socket not connected\n");
return OK;
}
/* We are only prepared to handle the MSS of connected TCP/IP and UDP
* sockets here.
*/
switch (psock->s_type)
{
#if defined(NET_TCP_HAVE_STACK)
case SOCK_STREAM:
{
FAR struct tcp_conn_s *conn = (FAR struct tcp_conn_s *)psock->s_conn;
/* For TCP, the MSS is a dynamic value that maintained in the
* connection structure.
*/
buf->st_blksize = conn->mss;
}
break;
#endif
#if defined(NET_UDP_HAVE_STACK)
case SOCK_DGRAM:
{
FAR struct udp_conn_s *conn = (FAR struct udp_conn_s *)psock->s_conn;
FAR struct net_driver_s *dev;
uint16_t iplen;
/* For a connected UDP socket, we have do do a little more work:
*
* MSS = MTU - LL_HDRLEN - UDP_HDRLEN - IP_HDRLEN
*
* We need to have the device that services the connection in order
* to get the MTU and LL_HDRLEN:
*/
dev = udp_find_raddr_device(conn);
if (dev == NULL)
{
/* This should never happen except perhaps in some rare race
* condition. If the UDP socket is connected, then the device
* service the network that it is connected to should always
* exist.
*/
nerr("ERROR: Could not find network device\n");
ret = -ENODEV;
}
else
{
/* We need the length of the IP header */
#if defined(CONFIG_NET_IPv4) && defined(CONFIG_NET_IPv6)
iplen = (conn->domain == PF_INET) ? IPv4_HDRLEN : IPv6_HDRLEN;
#elif defined(CONFIG_NET_IPv4)
iplen = IPv4_HDRLEN;
#else
iplen = IPv6_HDRLEN;
#endif
/* Now we can calculate the MSS */
buf->st_blksize = UDP_MSS(dev, iplen);
}
}
break;
#endif
default:
nwarn("WARNING: Unhandled socket type: %u\n", psock->s_type);
break;
}
return ret;
}