sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
205c8934a3
nuttx/drivers/net/telnet.c
anjiahao d1d46335df Replace nxsem API when used as a lock with nxmutex API 
Signed-off-by: anjiahao <anjiahao@xiaomi.com>
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-10-17 15:59:46 +09:00

1211 lines
32 KiB
C
Raw Blame History

/****************************************************************************
* drivers/net/telnet.c
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership. The
* ASF licenses this file to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance with the
* License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
* License for the specific language governing permissions and limitations
* under the License.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <assert.h>
#include <stdio.h>
#include <fcntl.h>
#include <poll.h>
#include <errno.h>
#include <debug.h>
#include <nuttx/kmalloc.h>
#include <nuttx/kthread.h>
#include <nuttx/signal.h>
#include <nuttx/mutex.h>
#include <nuttx/fs/fs.h>
#include <nuttx/net/net.h>
#include <nuttx/net/telnet.h>
#ifdef CONFIG_NETDEV_TELNET
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
/* Configuration ************************************************************/
#ifndef CONFIG_TELNET_RXBUFFER_SIZE
# define CONFIG_TELNET_RXBUFFER_SIZE 256
#endif
#ifndef CONFIG_TELNET_TXBUFFER_SIZE
# define CONFIG_TELNET_TXBUFFER_SIZE 256
#endif
#ifndef CONFIG_TELNET_MAXLCLIENTS
# define CONFIG_TELNET_MAXLCLIENTS 8
#endif
#undef HAVE_SIGNALS
#if defined(CONFIG_TTY_SIGINT) || defined(CONFIG_TTY_SIGTSTP)
# define HAVE_SIGNALS
#endif
/* Telnet protocol stuff ****************************************************/
#define TELNET_NL 0x0a
#define TELNET_CR 0x0d
/* Telnet commands */
#define TELNET_ECHO 1
#define TELNET_SGA 3 /* Suppress Go Ahead */
#define TELNET_NAWS 31 /* Negotiate about window size */
/* Telnet control */
#define TELNET_IAC 255
#define TELNET_WILL 251
#define TELNET_WONT 252
#define TELNET_DO 253
#define TELNET_DONT 254
#define TELNET_SB 250
#define TELNET_SE 240
/* Device stuff *************************************************************/
#define TELNET_DEVFMT "/dev/telnet%d"
/****************************************************************************
* Private Types
****************************************************************************/
/* The state of the telnet parser */
enum telnet_state_e
{
STATE_NORMAL = 0,
STATE_IAC,
STATE_WILL,
STATE_WONT,
STATE_DO,
STATE_DONT,
STATE_SB,
STATE_SB_NAWS,
STATE_SE
};
/* This structure describes the internal state of the driver */
struct telnet_dev_s
{
uint8_t td_state; /* (See telnet_state_e) */
uint8_t td_crefs; /* The number of open references to the session */
uint8_t td_minor; /* Minor device number */
uint16_t td_offset; /* Offset to the valid, pending bytes in the rxbuffer */
uint16_t td_pending; /* Number of valid, pending bytes in the rxbuffer */
#ifdef CONFIG_TELNET_SUPPORT_NAWS
uint16_t td_rows; /* Number of NAWS rows */
uint16_t td_cols; /* Number of NAWS cols */
int td_sb_count; /* Count of TELNET_SB bytes received */
#endif
#ifdef HAVE_SIGNALS
pid_t td_pid;
#endif
FAR struct socket td_psock; /* A clone of the internal socket structure */
char td_rxbuffer[CONFIG_TELNET_RXBUFFER_SIZE];
char td_txbuffer[CONFIG_TELNET_TXBUFFER_SIZE];
};
/****************************************************************************
* Private Function Prototypes
****************************************************************************/
/* Support functions */
#ifdef CONFIG_TELNET_DUMPBUFFER
static inline void telnet_dumpbuffer(FAR const char *msg,
FAR const char *buffer, unsigned int nbytes);
#else
# define telnet_dumpbuffer(msg,buffer,nbytes)
#endif
static void telnet_getchar(FAR struct telnet_dev_s *priv, uint8_t ch,
FAR char *dest, int *nread);
static ssize_t telnet_receive(FAR struct telnet_dev_s *priv,
FAR const char *src, size_t srclen, FAR char *dest,
size_t destlen);
static bool telnet_putchar(FAR struct telnet_dev_s *priv, uint8_t ch,
int *nwritten);
static void telnet_sendopt(FAR struct telnet_dev_s *priv, uint8_t option,
uint8_t value);
/* Telnet character driver methods */
static int telnet_open(FAR struct file *filep);
static int telnet_close(FAR struct file *filep);
static ssize_t telnet_read(FAR struct file *filep, FAR char *buffer,
size_t len);
static ssize_t telnet_write(FAR struct file *filep, FAR const char *buffer,
size_t len);
static int telnet_ioctl(FAR struct file *filep, int cmd,
unsigned long arg);
static int telnet_poll(FAR struct file *filep, FAR struct pollfd *fds,
bool setup);
/* Telnet session creation */
static int telnet_session(FAR struct telnet_session_s *session);
/* Telnet factory driver methods */
static ssize_t factory_read(FAR struct file *filep, FAR char *buffer,
size_t buflen);
static ssize_t factory_write(FAR struct file *filep, FAR const char *buffer,
size_t buflen);
static int factory_ioctl(FAR struct file *filep, int cmd,
unsigned long arg);
/****************************************************************************
* Private Data
****************************************************************************/
static const struct file_operations g_telnet_fops =
{
telnet_open, /* open */
telnet_close, /* close */
telnet_read, /* read */
telnet_write, /* write */
NULL, /* seek */
telnet_ioctl, /* ioctl */
telnet_poll /* poll */
#ifndef CONFIG_DISABLE_PSEUDOFS_OPERATIONS
, NULL /* unlink */
#endif
};
static const struct file_operations g_factory_fops =
{
NULL, /* open */
NULL, /* close */
factory_read, /* read */
factory_write, /* write */
NULL, /* seek */
factory_ioctl, /* ioctl */
NULL /* poll */
#ifndef CONFIG_DISABLE_PSEUDOFS_OPERATIONS
, NULL /* unlink */
#endif
};
/* This is an global data set of all of all active Telnet drivers. This
* additional logic in included to handle killing of task via control
* characters received via Telenet (via Ctrl-C SIGINT, in particular).
*/
static struct telnet_dev_s *g_telnet_clients[CONFIG_TELNET_MAXLCLIENTS];
static mutex_t g_clients_lock = NXMUTEX_INITIALIZER;
/****************************************************************************
* Private Functions
****************************************************************************/
/****************************************************************************
* Name: telnet_dumpbuffer
*
* Description:
* Dump a buffer of data (debug only)
*
****************************************************************************/
#ifdef CONFIG_TELNET_DUMPBUFFER
static inline void telnet_dumpbuffer(FAR const char *msg,
FAR const char *buffer,
unsigned int nbytes)
{
/* CONFIG_DEBUG_FEATURES, CONFIG_DEBUG_INFO, and CONFIG_DEBUG_NET have to
* be defined or the following does nothing.
*/
ninfodumpbuffer(msg, (FAR const uint8_t *)buffer, nbytes);
}
#endif
/****************************************************************************
* Name: telnet_check_ctrlchar
*
* Description:
* Check if an incoming control character should generate a signal.
*
****************************************************************************/
#ifdef HAVE_SIGNALS
static void telnet_check_ctrlchar(FAR struct telnet_dev_s *priv,
FAR char *buffer, size_t len)
{
int signo = 0;
for (; priv->td_pid >= 0 && len > 0; buffer++, len--)
{
#ifdef CONFIG_TTY_SIGINT
/* Is this the special character that will generate the SIGINT
* signal?
*/
if (*buffer == CONFIG_TTY_SIGINT_CHAR)
{
/* Yes.. note that the kill is needed and do not put the character
* into the Rx buffer. It should not be read as normal data.
*/
signo = SIGINT;
break;
}
#endif
#ifdef CONFIG_TTY_SIGTSTP
/* Is this the special character that will generate the SIGTSTP
* signal?
*/
if (*buffer == CONFIG_TTY_SIGTSTP_CHAR)
{
/* Note that the kill is needed and do not put the character
* into the Rx buffer. It should not be read as normal data.
*/
signo = SIGTSTP;
#ifndef CONFIG_TTY_SIGINT
break;
#endif
}
#endif
}
/* Send the signal if necessary */
if (signo != 0)
{
nxsig_kill(priv->td_pid, signo);
}
}
#endif
/****************************************************************************
* Name: telnet_getchar
*
* Description:
* Get another character for the user received buffer from the RX buffer
*
****************************************************************************/
static void telnet_getchar(FAR struct telnet_dev_s *priv, uint8_t ch,
FAR char *dest, int *nread)
{
register int index;
#ifndef CONFIG_TELNET_CHARACTER_MODE
/* Ignore carriage returns */
if (ch != TELNET_CR)
#endif
{
/* Add all other characters to the destination buffer */
index = *nread;
dest[index++] = ch;
*nread = index;
}
}
/****************************************************************************
* Name: telnet_receive
*
* Description:
* Process a received Telnet buffer
*
****************************************************************************/
static ssize_t telnet_receive(FAR struct telnet_dev_s *priv,
FAR const char *src, size_t srclen,
FAR char *dest, size_t destlen)
{
int nread;
uint8_t ch;
ninfo("srclen: %zd destlen: %zd\n", srclen, destlen);
for (nread = 0; srclen > 0 && nread < destlen; srclen--)
{
ch = *src++;
ninfo("ch=%02x state=%d\n", ch, priv->td_state);
switch (priv->td_state)
{
case STATE_IAC:
if (ch == TELNET_IAC)
{
telnet_getchar(priv, ch, dest, &nread);
priv->td_state = STATE_NORMAL;
}
else
{
switch (ch)
{
case TELNET_WILL:
priv->td_state = STATE_WILL;
break;
case TELNET_WONT:
priv->td_state = STATE_WONT;
break;
case TELNET_DO:
priv->td_state = STATE_DO;
break;
case TELNET_DONT:
priv->td_state = STATE_DONT;
break;
#ifdef CONFIG_TELNET_SUPPORT_NAWS
case TELNET_SB:
priv->td_state = STATE_SB;
priv->td_sb_count = 0;
break;
case TELNET_SE:
priv->td_state = STATE_NORMAL;
break;
#endif
default:
priv->td_state = STATE_NORMAL;
break;
}
}
break;
case STATE_WILL:
#ifdef CONFIG_TELNET_SUPPORT_NAWS
/* For NAWS, Reply with a DO */
if (ch == TELNET_NAWS)
{
telnet_sendopt(priv, TELNET_DO, ch);
}
/* Reply with a DON'T */
else
#endif
{
telnet_sendopt(priv, TELNET_DONT, ch);
ninfo("Suppress: 0x%02X (%d)\n", ch, ch);
}
priv->td_state = STATE_NORMAL;
break;
case STATE_WONT:
telnet_sendopt(priv, TELNET_DONT, ch);
priv->td_state = STATE_NORMAL;
break;
case STATE_DO:
#ifdef CONFIG_TELNET_CHARACTER_MODE
if (ch == TELNET_SGA || ch == TELNET_ECHO)
{
/* If it received 'ECHO' or 'Suppress Go Ahead', then do
* nothing.
*/
}
else
{
/* Reply with a WONT */
telnet_sendopt(priv, TELNET_WONT, ch);
ninfo("WONT: 0x%02X\n", ch);
}
#else
/* Reply with a WONT */
telnet_sendopt(priv, TELNET_WONT, ch);
#endif
priv->td_state = STATE_NORMAL;
break;
case STATE_DONT:
/* Reply with a WONT */
telnet_sendopt(priv, TELNET_WONT, ch);
priv->td_state = STATE_NORMAL;
break;
case STATE_NORMAL:
if (ch == TELNET_IAC)
{
priv->td_state = STATE_IAC;
}
else
{
telnet_getchar(priv, ch, dest, &nread);
}
break;
#ifdef CONFIG_TELNET_SUPPORT_NAWS
/* Handle Telnet Sub negotiation request */
case STATE_SB:
switch (ch)
{
case TELNET_NAWS:
priv->td_state = STATE_SB_NAWS;
break;
default:
priv->td_state = STATE_NORMAL;
break;
}
break;
/* Handle NAWS sub-option negotiation */
case STATE_SB_NAWS:
/* Update cols / rows based on received byte count */
switch (priv->td_sb_count)
{
case 0:
priv->td_cols = (priv->td_cols & 0x00ff) | (ch << 8);
break;
case 1:
priv->td_cols = (priv->td_cols & 0xff00) | ch;
break;
case 2:
priv->td_rows = (priv->td_rows & 0x00ff) | (ch << 8);
break;
case 3:
priv->td_rows = (priv->td_rows & 0xff00) | ch;
ninfo("NAWS: %d,%d", priv->td_cols, priv->td_rows);
break;
}
/* Increment SB count and switch to NORMAL when complete */
if (++priv->td_sb_count == 4)
{
priv->td_state = STATE_NORMAL;
}
break;
#endif
}
}
/* We get here if (1) all of the received bytes have been processed, or
* (2) if the user's buffer has become full.
*/
if (srclen > 0)
{
/* Remember where we left off. These bytes will be returned the next
* time that telnet_read() is called.
*/
priv->td_pending = srclen;
priv->td_offset = (src - priv->td_rxbuffer);
}
else
{
/* All of the received bytes were consumed */
priv->td_pending = 0;
priv->td_offset = 0;
}
return nread;
}
/****************************************************************************
* Name: telnet_putchar
*
* Description:
* Put another character from the user buffer to the TX buffer.
*
****************************************************************************/
static bool telnet_putchar(FAR struct telnet_dev_s *priv, uint8_t ch,
int *nread)
{
register int index;
bool ret = false;
/* Ignore carriage returns (we will put these in automatically as
* necessary).
*/
if (ch != TELNET_CR)
{
/* Add all other characters to the destination buffer */
index = *nread;
priv->td_txbuffer[index++] = ch;
/* Check for line feeds */
if (ch == TELNET_NL)
{
/* Now add the carriage return */
priv->td_txbuffer[index++] = TELNET_CR;
/* End of line */
ret = true;
}
*nread = index;
}
return ret;
}
/****************************************************************************
* Name: telnet_sendopt
*
* Description:
* Send the telnet option bytes
*
****************************************************************************/
static void telnet_sendopt(FAR struct telnet_dev_s *priv, uint8_t option,
uint8_t value)
{
uint8_t optbuf[3];
int ret;
optbuf[0] = TELNET_IAC;
optbuf[1] = option;
optbuf[2] = value;
telnet_dumpbuffer("Send optbuf", optbuf, 3);
ret = psock_send(&priv->td_psock, optbuf, 3, 0);
if (ret < 0)
{
nerr("ERROR: Failed to send TELNET_IAC: %d\n", ret);
}
}
/****************************************************************************
* Name: telnet_open
****************************************************************************/
static int telnet_open(FAR struct file *filep)
{
FAR struct inode *inode = filep->f_inode;
FAR struct telnet_dev_s *priv = inode->i_private;
int tmp;
int ret;
ninfo("td_crefs: %d\n", priv->td_crefs);
/* Get exclusive access to the device structures */
ret = nxmutex_lock(&g_clients_lock);
if (ret < 0)
{
nerr("ERROR: nxmutex_lock failed: %d\n", ret);
goto errout;
}
/* Increment the count of references to the device. If this the first
* time that the driver has been opened for this device, then initialize
* the device.
*/
tmp = priv->td_crefs + 1;
if (tmp > 255)
{
/* More than 255 opens; uint8_t would overflow to zero */
ret = -EMFILE;
goto errout_with_lock;
}
/* Save the new open count on success */
priv->td_crefs = tmp;
ret = OK;
errout_with_lock:
nxmutex_unlock(&g_clients_lock);
errout:
return ret;
}
/****************************************************************************
* Name: telnet_close
****************************************************************************/
static int telnet_close(FAR struct file *filep)
{
FAR struct inode *inode = filep->f_inode;
FAR struct telnet_dev_s *priv = inode->i_private;
FAR char *devpath;
int ret;
int i;
ninfo("td_crefs: %d\n", priv->td_crefs);
/* Get exclusive access to the device structures */
ret = nxmutex_lock(&g_clients_lock);
if (ret < 0)
{
nerr("ERROR: nxmutex_lock failed: %d\n", ret);
return ret;
}
/* Decrement the references to the driver. If the reference count will
* decrement to 0, then uninitialize the driver.
*/
if (priv->td_crefs > 1)
{
/* Just decrement the reference count */
priv->td_crefs--;
}
else
{
/* Re-create the path to the driver. */
ret = asprintf(&devpath, TELNET_DEVFMT, priv->td_minor);
if (ret < 0)
{
nerr("ERROR: Failed to allocate the driver path\n");
}
else
{
/* Un-register the character driver */
ret = unregister_driver(devpath);
if (ret < 0)
{
/* NOTE: a return value of -EBUSY is not an error, it simply
* means that the Telnet driver is busy now and cannot be
* registered now because there are other sessions using the
* connection. The driver will be properly unregistered when
* the final session terminates.
*/
if (ret != -EBUSY)
{
nerr("ERROR: Failed to unregister the driver %s: %d\n",
devpath, ret);
}
else
{
ret = OK;
}
}
kmm_free(devpath);
}
for (i = 0; i < CONFIG_TELNET_MAXLCLIENTS; i++)
{
if (g_telnet_clients[i] == priv)
{
g_telnet_clients[i] = NULL;
break;
}
}
/* Close the socket */
psock_close(&priv->td_psock);
kmm_free(priv);
}
nxmutex_unlock(&g_clients_lock);
return ret;
}
/****************************************************************************
* Name: telnet_read
****************************************************************************/
static ssize_t telnet_read(FAR struct file *filep, FAR char *buffer,
size_t len)
{
FAR struct inode *inode = filep->f_inode;
FAR struct telnet_dev_s *priv = inode->i_private;
ssize_t nread = 0;
ninfo("len: %zd\n", len);
/* First, handle the case where there are still valid bytes left in the
* I/O buffer from the last time that read was called. NOTE: Much of
* what we read may be protocol stuff and may not correspond to user
* data. Hence we need the loop and we need may need to wait for data
* multiple times in order to get data that the client is interested in.
*/
do
{
FAR const char *src;
if (priv->td_pending == 0)
{
nread = psock_recv(&priv->td_psock,
priv->td_rxbuffer,
CONFIG_TELNET_RXBUFFER_SIZE,
0);
if (nread <= 0)
{
return nread;
}
priv->td_pending = nread;
}
/* Process the buffered telnet data */
src = &priv->td_rxbuffer[priv->td_offset];
nread = telnet_receive(priv, src, priv->td_pending, buffer, len);
}
while (nread == 0);
#ifdef HAVE_SIGNALS
/* Check if any of the received characters is a
* control that should generate a signal.
*/
telnet_check_ctrlchar(priv, buffer, nread);
#endif
/* Returned Value:
*
* nread > 0: The number of characters copied into the user buffer by
* telnet_receive().
* nread <= 0: Loss of connection or error events reported by recv().
*/
return nread;
}
/****************************************************************************
* Name: telnet_write
****************************************************************************/
static ssize_t telnet_write(FAR struct file *filep, FAR const char *buffer,
size_t len)
{
FAR struct inode *inode = filep->f_inode;
FAR struct telnet_dev_s *priv = inode->i_private;
FAR const char *src = buffer;
ssize_t ret = 0;
ssize_t nsent;
int ncopied;
char ch;
bool eol;
ninfo("len: %zd\n", len);
/* Process each character from the user buffer */
for (nsent = 0, ncopied = 0; nsent < len; nsent++)
{
/* Get the next character from the user buffer */
ch = *src++;
/* Add the character to the TX buffer */
eol = telnet_putchar(priv, ch, &ncopied);
/* Was that the end of a line? Or is the buffer too full to hold the
* next largest character sequence ("\r\n")?
*/
if (eol || ncopied > CONFIG_TELNET_TXBUFFER_SIZE - 2)
{
/* Yes... send the data now */
ret = psock_send(&priv->td_psock, priv->td_txbuffer, ncopied, 0);
if (ret < 0)
{
nerr("ERROR: psock_send failed '%s': %zd\n",
priv->td_txbuffer, ret);
goto out;
}
/* Reset the index to the beginning of the TX buffer. */
ncopied = 0;
}
}
/* Send anything remaining in the TX buffer */
if (ncopied > 0)
{
ret = psock_send(&priv->td_psock, priv->td_txbuffer, ncopied, 0);
if (ret < 0)
{
nerr("ERROR: psock_send failed '%s': %zd\n",
priv->td_txbuffer, ret);
goto out;
}
}
/* Notice that we don't actually return the number of bytes sent, but
* rather, the number of bytes that the caller asked us to send. We may
* have sent more bytes (because of CR-LF expansion). But it confuses
* some logic if you report that you sent more than you were requested to.
*/
out:
return nsent ? nsent : ret;
}
/****************************************************************************
* Name: telnet_session
*
* Description:
* Create a character driver to "wrap" the telnet session. This function
* will select and return a unique path for the new telnet device.
*
* Input Parameters:
* session - On input, contains the socket descriptor that represents the
* new telnet connection. On output, it holds the path to the new Telnet
* driver.
*
* Returned Value:
* Zero (OK) on success; a negated errno value on failure.
*
****************************************************************************/
static int telnet_session(FAR struct telnet_session_s *session)
{
FAR struct telnet_dev_s *priv;
FAR struct socket *psock;
int ret;
/* Allocate instance data for this driver */
priv = (FAR struct telnet_dev_s *)kmm_zalloc(sizeof(struct telnet_dev_s));
if (!priv)
{
nerr("ERROR: Failed to allocate the driver data structure\n");
return -ENOMEM;
}
priv->td_state = STATE_NORMAL;
priv->td_crefs = 0;
priv->td_minor = 0;
priv->td_pending = 0;
priv->td_offset = 0;
#ifdef HAVE_SIGNALS
priv->td_pid = INVALID_PROCESS_ID;
#endif
#ifdef CONFIG_TELNET_SUPPORT_NAWS
priv->td_rows = 25;
priv->td_cols = 80;
priv->td_sb_count = 0;
#endif
/* Clone the internal socket structure. We do this so that it will be
* independent of threads and of socket descriptors (the original socket
* instance resided in the daemon's task group`).
*/
psock = sockfd_socket(session->ts_sd);
if (!psock)
{
nerr("ERROR: Failed to convert sd=%d to a socket structure\n",
session->ts_sd);
ret = -EINVAL;
goto errout_with_dev;
}
ret = psock_dup2(psock, &priv->td_psock);
if (ret < 0)
{
nerr("ERROR: psock_dup2 failed: %d\n", ret);
goto errout_with_dev;
}
/* Allocate a unique minor device number of the telnet driver.
* Get exclusive access to the minor counter.
*/
ret = nxmutex_lock(&g_clients_lock);
if (ret < 0)
{
nerr("ERROR: nxmutex_lock failed: %d\n", ret);
goto errout_with_clone;
}
/* Loop until the device name is verified to be unique. */
while (priv->td_minor < CONFIG_TELNET_MAXLCLIENTS)
{
if (g_telnet_clients[priv->td_minor] == NULL)
{
snprintf(session->ts_devpath, TELNET_DEVPATH_MAX,
TELNET_DEVFMT, priv->td_minor);
break;
}
priv->td_minor++;
}
if (priv->td_minor >= CONFIG_TELNET_MAXLCLIENTS)
{
nerr("ERROR: Too many sessions\n");
ret = -ENFILE;
goto errout_with_lock;
}
/* Register the driver */
ret = register_driver(session->ts_devpath, &g_telnet_fops, 0666, priv);
if (ret < 0)
{
nerr("ERROR: Failed to register the driver %s: %d\n",
session->ts_devpath, ret);
goto errout_with_lock;
}
/* Close the original psock (keeping the clone) */
nx_close(session->ts_sd);
#ifdef CONFIG_TELNET_SUPPORT_NAWS
telnet_sendopt(priv, TELNET_DO, TELNET_NAWS);
#endif
#ifdef CONFIG_TELNET_CHARACTER_MODE
telnet_sendopt(priv, TELNET_WILL, TELNET_SGA);
telnet_sendopt(priv, TELNET_WILL, TELNET_ECHO);
#endif
/* Save ourself in the list of Telnet client threads */
g_telnet_clients[priv->td_minor] = priv;
nxmutex_unlock(&g_clients_lock);
return OK;
errout_with_lock:
nxmutex_unlock(&g_clients_lock);
errout_with_clone:
psock_close(&priv->td_psock);
errout_with_dev:
kmm_free(priv);
return ret;
}
/****************************************************************************
* Name: factory_read
****************************************************************************/
static ssize_t factory_read(FAR struct file *filep, FAR char *buffer,
size_t len)
{
return 0; /* Return EOF */
}
/****************************************************************************
* Name: factory_write
****************************************************************************/
static ssize_t factory_write(FAR struct file *filep, FAR const char *buffer,
size_t len)
{
return len; /* Say that everything was written */
}
/****************************************************************************
* Name: telnet_ioctl
****************************************************************************/
static int telnet_ioctl(FAR struct file *filep, int cmd, unsigned long arg)
{
FAR struct inode *inode = filep->f_inode;
FAR struct telnet_dev_s *priv = inode->i_private;
int ret = OK;
switch (cmd)
{
#ifdef HAVE_SIGNALS
/* Make the given terminal the controlling terminal of the calling
* process.
*/
case TIOCSCTTY:
{
/* Check if the ISIG flag is set in the termios c_lflag to enable
* this feature. This flag is set automatically for a serial console
* device.
*/
/* Save the PID of the recipient of the SIGINT signal. */
priv->td_pid = (pid_t)arg;
DEBUGASSERT((unsigned long)(priv->td_pid) == arg);
}
break;
#endif
#ifdef CONFIG_TELNET_SUPPORT_NAWS
case TIOCGWINSZ:
{
FAR struct winsize *pw = (FAR struct winsize *)((uintptr_t)arg);
/* Get row/col from the private data */
pw->ws_row = priv->td_rows;
pw->ws_col = priv->td_cols;
}
break;
#endif
default:
ret = psock_ioctl(&priv->td_psock, cmd, arg);
break;
}
return ret;
}
/****************************************************************************
* Name: telnet_poll
*
* Description:
* The standard poll() operation redirects operations on socket descriptors
* to this function.
*
* Input Parameters:
* fd - The socket descriptor of interest
* fds - The structure describing the events to be monitored, OR NULL if
* this is a request to stop monitoring events.
* setup - true: Setup up the poll; false: Teardown the poll
*
* Returned Value:
* 0: Success; Negated errno on failure
*
****************************************************************************/
static int telnet_poll(FAR struct file *filep, FAR struct pollfd *fds,
bool setup)
{
FAR struct inode *inode = filep->f_inode;
FAR struct telnet_dev_s *priv = inode->i_private;
DEBUGASSERT(fds != NULL);
/* Test if we have cached data waiting to be read */
if (priv->td_pending > 0)
{
/* Yes.. then signal the poll logic */
poll_notify(&fds, 1, POLLRDNORM);
}
/* Then let psock_poll() do the heavy lifting */
return psock_poll(&priv->td_psock, fds, setup);
}
/****************************************************************************
* Name: factory_ioctl
****************************************************************************/
static int factory_ioctl(FAR struct file *filep, int cmd, unsigned long arg)
{
int ret = OK;
switch (cmd)
{
/* Command: SIOCTELNET
* Description: Create a Telnet sessions.
* Argument: A pointer to a write-able instance of struct
* telnet_session_s.
* Dependencies: CONFIG_NETDEV_TELNET
*/
case SIOCTELNET:
{
FAR struct telnet_session_s *session =
(FAR struct telnet_session_s *)((uintptr_t)arg);
if (session == NULL)
{
ret = -EINVAL;
}
else
{
ret = telnet_session(session);
}
}
break;
default:
ret = -ENOTTY;
break;
}
return ret;
}
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: telnet_initialize
*
* Description:
* Create the Telnet factory at /dev/telnet.
*
* Input Parameters:
* None
*
* Returned Value:
* Zero (OK) on success; a negated errno value on failure.
*
****************************************************************************/
int telnet_initialize(void)
{
return register_driver("/dev/telnet", &g_factory_fops, 0666, NULL);
}
#endif /* CONFIG_NETDEV_TELNET */
Reference in New Issue View Git Blame Copy Permalink