nuttx/arch/arm/include/lm/chip.h
patacongo 209327349e Add psock_poll(); Fix some warnings reported by Lorenz Meier; lm4f logic from JP
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5557 42af7a65-404d-4744-a932-0658087f49c3
2013-01-24 18:39:53 +00:00

160 lines
8.2 KiB
C

/************************************************************************************
* arch/arm/include/lm/chip.h
*
* Copyright (C) 2009-2010, 2013 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
* Author: Jose Pablo Carballo <jcarballo@nx-engineering.com>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
************************************************************************************/
#ifndef __ARCH_ARM_INCLUDE_LM_CHIP_H
#define __ARCH_ARM_INCLUDE_LM_CHIP_H
/************************************************************************************
* Included Files
************************************************************************************/
#include <nuttx/config.h>
/************************************************************************************
* Pre-processor Definitions
************************************************************************************/
/* Get customizations for each supported chip (only the LM3S6918 and 65 right now) */
#if defined(CONFIG_ARCH_CHIP_LM3S6918)
# define LM_NTIMERS 4 /* Four general purpose timers */
# define LM_NWIDETIMERS 0 /* No general purpose wide timers */
# define LM_NETHCONTROLLERS 1 /* One Ethernet controller */
# undef LM_ETHTS /* No timestamp register */
# define LM_NSSI 2 /* Two SSI modules */
# define LM_NUARTS 2 /* Two UART modules */
# define LM_NI2C 2 /* Two I2C modules */
# define LM_NADC 1 /* One ADC module */
# define LM_NPWM 0 /* No PWM generator modules */
# define LM_NQEI 0 /* No quadrature encoders */
# define LM_NPORTS 8 /* 8 Ports (GPIOA-H) 5-38 GPIOs */
# define LM_NCANCONTROLLER 0 /* No CAN controllers */
#elif defined(CONFIG_ARCH_CHIP_LM3S6432)
# define LM_NTIMERS 3 /* Three general purpose timers */
# define LM_NWIDETIMERS 0 /* No general purpose wide timers */
# define LM_NETHCONTROLLERS 1 /* One Ethernet controller */
# undef LM_ETHTS /* No timestamp register */
# define LM_NSSI 1 /* One SSI module */
# define LM_NUARTS 2 /* Two UART modules */
# define LM_NI2C 1 /* Two I2C modules */
# define LM_NADC 1 /* One ADC module */
# define LM_NPWM 1 /* One PWM generator module */
# define LM_NQEI 0 /* No quadrature encoders */
# define LM_NPORTS 7 /* 7 Ports (GPIOA-G), 0-42 GPIOs */
# define LM_NCANCONTROLLER 0 /* No CAN controllers */
#elif defined(CONFIG_ARCH_CHIP_LM3S6965)
# define LM_NTIMERS 4 /* Four general purpose timers */
# define LM_NWIDETIMERS 0 /* No general purpose wide timers */
# define LM_NETHCONTROLLERS 1 /* One Ethernet controller */
# undef LM_ETHTS /* No timestamp register */
# define LM_NSSI 1 /* One SSI module */
# define LM_NUARTS 3 /* Three UART modules */
# define LM_NI2C 2 /* Two I2C modules */
# define LM_NADC 1 /* One ADC module */
# define LM_NPWM 3 /* Three PWM generator modules */
# define LM_NQEI 2 /* Two quadrature encoders */
# define LM_NPORTS 7 /* 7 Ports (GPIOA-G), 0-42 GPIOs */
# define LM_NCANCONTROLLER 0 /* No CAN controllers */
#elif defined(CONFIG_ARCH_CHIP_LM3S9B96)
# define LM_NTIMERS 4 /* Four general purpose timers */
# define LM_NWIDETIMERS 0 /* No general purpose wide timers */
# define LM_NETHCONTROLLERS 1 /* One Ethernet controller */
# undef LM_ETHTS /* No timestamp register */
# define LM_NSSI 2 /* Two SSI modules */
# define LM_NUARTS 3 /* Three UART modules */
# define LM_NI2C 2 /* Two I2C modules */
# define LM_NADC 2 /* Two ADC module */
# define LM_CAN 2 /* Two CAN module */
# define LM_NPWM 4 /* Four PWM generator modules */
# define LM_NQEI 2 /* Two quadrature encoders */
# define LM_NPORTS 9 /* 9 Ports (GPIOA-H,J) 0-65 GPIOs */
# define LM_NCANCONTROLLER 0 /* No CAN controllers */
#elif defined(CONFIG_ARCH_CHIP_LM3S8962)
# define LM_NTIMERS 6 /* Four general purpose timers */
# define LM_NWIDETIMERS 0 /* No general purpose wide timers */
# define LM_NETHCONTROLLERS 1 /* One Ethernet controller */
# define LM_NSSI 1 /* One SSI module */
# define LM_NUARTS 3 /* Two UART modules */
# define LM_NI2C 2 /* One I2C module */
# define LM_NADC 1 /* One ADC module */
# define LM_NPWM 3 /* Three PWM generator modules */
# define LM_NQEI 2 /* Two quadrature encoders */
# define LM_NPORTS 7 /* 7 Ports (GPIOA-G), 5-42 GPIOs */
# define LM_NCANCONTROLLER 1 /* One CAN controller */
#elif defined(CONFIG_ARCH_CHIP_LM4F120)
# define LM_NTIMERS 6 /* Six general purpose timers */
# define LM_NWIDETIMERS 6 /* Six general purpose wide timers */
# define LM_NETHCONTROLLERS 0 /* No Ethernet controller */
# define LM_NSSI 4 /* Four SSI module */
# define LM_NUARTS 8 /* Eight UART modules */
# define LM_NI2C 4 /* Four I2C modules */
# define LM_NADC 2 /* Two ADC modules */
# define LM_NPWM 0 /* No PWM generator modules */
# define LM_NQEI 0 /* No quadrature encoders */
# define LM_NPORTS 6 /* 6 Ports (GPIOA-F), 0-43 GPIOs */
# define LM_NCANCONTROLLER 1 /* One CAN controller */
#else
# error "Capabilities not specified for this Stellaris chip"
#endif
/* The LM3S69xx only supports 8 priority levels. The hardware priority mechanism
* will only look at the upper N bits of the 8-bit priority level (where N is 3 for
* the Stellaris family), so any prioritization must be performed in those bits.
* The default priority level is set to the middle value
*/
#define NVIC_SYSH_PRIORITY_MIN 0xe0 /* Bits [5:7] set in minimum priority */
#define NVIC_SYSH_PRIORITY_DEFAULT 0x80 /* Midpoint is the default */
#define NVIC_SYSH_PRIORITY_MAX 0x00 /* Zero is maximum priority */
#define NVIC_SYSH_PRIORITY_STEP 0x20 /* Three bits of interrupt priority used */
#define NVIC_SYSH_DISABLE_PRIORITY (NVIC_SYSH_PRIORITY_MAX + NVIC_SYSH_PRIORITY_STEP)
#define NVIC_SYSH_SVCALL_PRIORITY NVIC_SYSH_PRIORITY_MAX
/************************************************************************************
* Public Types
************************************************************************************/
/************************************************************************************
* Public Data
************************************************************************************/
/****************************************************************************
* Public Function Prototypes
****************************************************************************/
#endif /* __ARCH_ARM_INCLUDE_LM_CHIP_H */