sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
21501f65b1
nuttx/tools/ci/platforms/linux.sh
Alin Jerpelea c9eef2d697 tools: migrate to SPDX identifier 
Most tools used for compliance and SBOM generation use SPDX identifiers
This change brings us a step closer to an easy SBOM generation.

Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
2024-09-10 23:11:11 +08:00

383 lines
14 KiB
Bash
Executable File
Raw Blame History

#!/usr/bin/env bash
############################################################################
# tools/ci/platforms/linux.sh
#
# SPDX-License-Identifier: Apache-2.0
#
# Licensed to the Apache Software Foundation (ASF) under one or more
# contributor license agreements. See the NOTICE file distributed with
# this work for additional information regarding copyright ownership. The
# ASF licenses this file to you under the Apache License, Version 2.0 (the
# "License"); you may not use this file except in compliance with the
# License. You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
# License for the specific language governing permissions and limitations
# under the License.
#
############################################################################
# Linux
set -e
set -o xtrace
add_path() {
PATH=$1:${PATH}
}
arm_clang_toolchain() {
add_path "${NUTTXTOOLS}"/clang-arm-none-eabi/bin
if [ ! -f "${NUTTXTOOLS}/clang-arm-none-eabi/bin/clang" ]; then
local basefile
basefile=LLVMEmbeddedToolchainForArm-17.0.1-Linux-x86_64
cd "${NUTTXTOOLS}"
# Download the latest ARM clang toolchain prebuilt by ARM
curl -O -L -s https://github.com/ARM-software/LLVM-embedded-toolchain-for-Arm/releases/download/release-17.0.1/${basefile}.tar.xz
xz -d ${basefile}.tar.xz
tar xf ${basefile}.tar
mv ${basefile} clang-arm-none-eabi
rm ${basefile}.tar
fi
command clang --version
}
arm_gcc_toolchain() {
add_path "${NUTTXTOOLS}"/gcc-arm-none-eabi/bin
if [ ! -f "${NUTTXTOOLS}/gcc-arm-none-eabi/bin/arm-none-eabi-gcc" ]; then
local basefile
basefile=arm-gnu-toolchain-13.2.Rel1-x86_64-arm-none-eabi
cd "${NUTTXTOOLS}"
# Download the latest ARM GCC toolchain prebuilt by ARM
wget --quiet https://developer.arm.com/-/media/Files/downloads/gnu/13.2.rel1/binrel/${basefile}.tar.xz
xz -d ${basefile}.tar.xz
tar xf ${basefile}.tar
mv ${basefile} gcc-arm-none-eabi
rm ${basefile}.tar
fi
command arm-none-eabi-gcc --version
}
arm64_gcc_toolchain() {
add_path "${NUTTXTOOLS}"/gcc-aarch64-none-elf/bin
if [ ! -f "${NUTTXTOOLS}/gcc-aarch64-none-elf/bin/aarch64-none-elf-gcc" ]; then
local basefile
basefile=arm-gnu-toolchain-13.2.Rel1-x86_64-aarch64-none-elf
cd "${NUTTXTOOLS}"
# Download the latest ARM64 GCC toolchain prebuilt by ARM
wget --quiet https://developer.arm.com/-/media/Files/downloads/gnu/13.2.Rel1/binrel/${basefile}.tar.xz
xz -d ${basefile}.tar.xz
tar xf ${basefile}.tar
mv ${basefile} gcc-aarch64-none-elf
rm ${basefile}.tar
fi
command aarch64-none-elf-gcc --version
}
bloaty() {
add_path "${NUTTXTOOLS}"/bloaty/bin
if [ ! -f "${NUTTXTOOLS}/bloaty/bin/bloaty" ]; then
git clone --depth 1 --branch v1.1 https://github.com/google/bloaty "${NUTTXTOOLS}"/bloaty-src
mkdir -p "${NUTTXTOOLS}"/bloaty
cd "${NUTTXTOOLS}"/bloaty-src
cmake -B build -DCMAKE_INSTALL_PREFIX="${NUTTXTOOLS}"/bloaty
cmake --build build
cmake --build build --target install
cd "${NUTTXTOOLS}"
rm -rf bloaty-src
ls -a "${NUTTXTOOLS}"/bloaty
fi
command bloaty --version
}
kconfig_frontends() {
add_path "${NUTTXTOOLS}"/kconfig-frontends/bin
if [ ! -f "${NUTTXTOOLS}/kconfig-frontends/bin/kconfig-conf" ]; then
git clone https://bitbucket.org/nuttx/tools.git "${NUTTXTOOLS}"/nuttx-tools
cd "${NUTTXTOOLS}"/nuttx-tools/kconfig-frontends
./configure --prefix="${NUTTXTOOLS}"/kconfig-frontends \
--disable-kconfig --disable-nconf --disable-qconf \
--disable-gconf --disable-mconf --disable-static \
--disable-shared --disable-L10n
# Avoid "aclocal/automake missing" errors
touch aclocal.m4 Makefile.in
make install
cd "${NUTTXTOOLS}"
rm -rf nuttx-tools
fi
}
mips_gcc_toolchain() {
add_path "${NUTTXTOOLS}"/pinguino-compilers/p32/bin
if [ ! -d "${NUTTXTOOLS}/pinguino-compilers/p32/bin/p32-gcc" ]; then
local basefile
basefile=pinguino-linux64-p32
mkdir -p "${NUTTXTOOLS}"/pinguino-compilers
cd "${NUTTXTOOLS}"
# Download the latest pinguino toolchain prebuilt by 32bit
curl -O -L -s https://github.com/PinguinoIDE/pinguino-compilers/releases/download/v20.10/${basefile}.zip
unzip -qo ${basefile}.zip
mv p32 "${NUTTXTOOLS}"/pinguino-compilers/p32
rm ${basefile}.zip
fi
command p32-gcc --version
}
python_tools() {
pip3 install \
cmake-format \
CodeChecker \
cvt2utf \
cxxfilt \
esptool==4.8.dev4 \
imgtool \
kconfiglib \
pexpect==4.8.0 \
pyelftools \
pyserial==3.5 \
pytest==6.2.5 \
pytest-json==0.4.0 \
pytest-ordering==0.6 \
pytest-repeat==0.9.1
}
riscv_gcc_toolchain() {
add_path "${NUTTXTOOLS}"/riscv-none-elf-gcc/bin
if [ ! -f "${NUTTXTOOLS}/riscv-none-elf-gcc/bin/riscv-none-elf-gcc" ]; then
local basefile
basefile=xpack-riscv-none-elf-gcc-13.2.0-2-linux-x64
cd "${NUTTXTOOLS}"
# Download the latest RISCV GCC toolchain prebuilt by xPack
wget --quiet https://github.com/xpack-dev-tools/riscv-none-elf-gcc-xpack/releases/download/v13.2.0-2/${basefile}.tar.gz
tar zxf ${basefile}.tar.gz
mv xpack-riscv-none-elf-gcc-13.2.0-2 riscv-none-elf-gcc
rm ${basefile}.tar.gz
fi
command riscv-none-elf-gcc --version
}
rx_gcc_toolchain() {
add_path "${NUTTXTOOLS}"/renesas-toolchain/rx-elf-gcc/bin
if [ ! -f "${NUTTXTOOLS}/renesas-toolchain/rx-elf-gcc/bin/rx-elf-gcc" ]; then
# Download toolchain source code
# RX toolchain is built from source code. Once prebuilt RX toolchain is made available, the below code snippet can be removed.
local basefilebinutils
local basefilegcc
local basefilenewlib
basefilebinutils=binutils-2.36.1
basefilegcc=gcc-8.3.0
basefilenewlib=newlib-4.1.0
mkdir -p "${NUTTXTOOLS}"/renesas-tools/source
curl -L -s "https://llvm-gcc-renesas.com/downloads/d.php?f=rx/binutils/8.3.0.202305-gnurx/binutils-2.36.1.tar.gz" -o ${basefilebinutils}.tar.gz
tar zxf ${basefilebinutils}.tar.gz
mv ${basefilebinutils} "${NUTTXTOOLS}"/renesas-tools/source/binutils
rm ${basefilebinutils}.tar.gz
curl -L -s "https://llvm-gcc-renesas.com/downloads/d.php?f=rx/gcc/8.3.0.202305-gnurx/gcc-8.3.0.tar.gz" -o ${basefilegcc}.tar.gz
tar zxf ${basefilegcc}.tar.gz
mv ${basefilegcc} "${NUTTXTOOLS}"/renesas-tools/source/gcc
rm ${basefilegcc}.tar.gz
curl -L -s "https://llvm-gcc-renesas.com/downloads/d.php?f=rx/newlib/8.3.0.202305-gnurx/newlib-4.1.0.tar.gz" -o ${basefilenewlib}.tar.gz
tar zxf ${basefilenewlib}.tar.gz
mv ${basefilenewlib} "${NUTTXTOOLS}"/renesas-tools/source/newlib
rm ${basefilenewlib}.tar.gz
# Install binutils
cd "${NUTTXTOOLS}"/renesas-tools/source/binutils; chmod +x ./configure ./mkinstalldirs
mkdir -p "${NUTTXTOOLS}"/renesas-tools/build/binutils; cd "${NUTTXTOOLS}"/renesas-tools/build/binutils
"${NUTTXTOOLS}"/renesas-tools/source/binutils/configure --target=rx-elf --prefix="${NUTTXTOOLS}"/renesas-toolchain/rx-elf-gcc \
--disable-werror
make; make install
# Install gcc
cd "${NUTTXTOOLS}"/renesas-tools/source/gcc
chmod +x ./contrib/download_prerequisites ./configure ./move-if-change ./libgcc/mkheader.sh
./contrib/download_prerequisites
sed -i '1s/^/@documentencoding ISO-8859-1\n/' ./gcc/doc/gcc.texi
sed -i 's/@tex/\n&/g' ./gcc/doc/gcc.texi && sed -i 's/@end tex/\n&/g' ./gcc/doc/gcc.texi
mkdir -p "${NUTTXTOOLS}"/renesas-tools/build/gcc; cd "${NUTTXTOOLS}"/renesas-tools/build/gcc
"${NUTTXTOOLS}"/renesas-tools/source/gcc/configure --target=rx-elf --prefix="${NUTTXTOOLS}"/renesas-toolchain/rx-elf-gcc \
--disable-shared --disable-multilib --disable-libssp --disable-libstdcxx-pch --disable-werror --enable-lto \
--enable-gold --with-pkgversion=GCC_Build_1.02 --with-newlib --enable-languages=c
make; make install
# Install newlib
cd "${NUTTXTOOLS}"/renesas-tools/source/newlib; chmod +x ./configure
mkdir -p "${NUTTXTOOLS}"/renesas-tools/build/newlib; cd "${NUTTXTOOLS}"/renesas-tools/build/newlib
"${NUTTXTOOLS}"/renesas-tools/source/newlib/configure --target=rx-elf --prefix="${NUTTXTOOLS}"/renesas-toolchain/rx-elf-gcc
make; make install
rm -rf "${NUTTXTOOLS}"/renesas-tools/
fi
command rx-elf-gcc --version
}
sparc_gcc_toolchain() {
add_path "${NUTTXTOOLS}"/sparc-gaisler-elf-gcc/bin
if [ ! -f "${NUTTXTOOLS}/sparc-gaisler-elf-gcc/bin/sparc-gaisler-elf-gcc" ]; then
local basefile
basefile=bcc-2.1.0-gcc-linux64
cd "${NUTTXTOOLS}"
# Download the SPARC GCC toolchain prebuilt by Gaisler
wget --quiet https://www.gaisler.com/anonftp/bcc2/bin/${basefile}.tar.xz
xz -d ${basefile}.tar.xz
tar xf ${basefile}.tar
mv bcc-2.1.0-gcc sparc-gaisler-elf-gcc
rm ${basefile}.tar
fi
command sparc-gaisler-elf-gcc --version
}
xtensa_esp32_gcc_toolchain() {
add_path "${NUTTXTOOLS}"/xtensa-esp32-elf/bin
if [ ! -f "${NUTTXTOOLS}/xtensa-esp32-elf/bin/xtensa-esp32-elf-gcc" ]; then
local basefile
basefile=xtensa-esp32-elf-12.2.0_20230208-x86_64-linux-gnu
cd "${NUTTXTOOLS}"
# Download the latest ESP32 GCC toolchain prebuilt by Espressif
wget --quiet https://github.com/espressif/crosstool-NG/releases/download/esp-12.2.0_20230208/${basefile}.tar.xz
xz -d ${basefile}.tar.xz
tar xf ${basefile}.tar
rm ${basefile}.tar
fi
command xtensa-esp32-elf-gcc --version
}
xtensa_esp32s2_gcc_toolchain() {
add_path "${NUTTXTOOLS}"/xtensa-esp32s2-elf/bin
if [ ! -f "${NUTTXTOOLS}/xtensa-esp32s2-elf/bin/xtensa-esp32s2-elf-gcc" ]; then
local basefile
basefile=xtensa-esp32s2-elf-12.2.0_20230208-x86_64-linux-gnu
cd "${NUTTXTOOLS}"
# Download the latest ESP32 S2 GCC toolchain prebuilt by Espressif
wget --quiet https://github.com/espressif/crosstool-NG/releases/download/esp-12.2.0_20230208/${basefile}.tar.xz
xz -d ${basefile}.tar.xz
tar xf ${basefile}.tar
rm ${basefile}.tar
fi
command xtensa-esp32s2-elf-gcc --version
}
xtensa_esp32s3_gcc_toolchain() {
add_path "${NUTTXTOOLS}"/xtensa-esp32s3-elf/bin
if [ ! -f "${NUTTXTOOLS}/xtensa-esp32s3-elf/bin/xtensa-esp32s3-elf-gcc" ]; then
local basefile
basefile=xtensa-esp32s3-elf-12.2.0_20230208-x86_64-linux-gnu
cd "${NUTTXTOOLS}"
# Download the latest ESP32 S3 GCC toolchain prebuilt by Espressif
wget --quiet https://github.com/espressif/crosstool-NG/releases/download/esp-12.2.0_20230208/${basefile}.tar.xz
xz -d ${basefile}.tar.xz
tar xf ${basefile}.tar
rm ${basefile}.tar
fi
command xtensa-esp32s3-elf-gcc --version
}
wasi_sdk() {
add_path "${NUTTXTOOLS}"/wamrc
if [ ! -f "${NUTTXTOOLS}/wasi-sdk/bin/clang" ]; then
local wasibasefile
local wasmbasefile
wasibasefile=wasi-sdk-19.0-linux
wasmbasefile=wamrc-1.1.2-x86_64-ubuntu-20.04
cd "${NUTTXTOOLS}"
mkdir -p wamrc
# Download the latest WASI-enabled WebAssembly C/C++ toolchain prebuilt by WASM
wget --quiet https://github.com/WebAssembly/wasi-sdk/releases/download/wasi-sdk-19/${wasibasefile}.tar.gz
tar xzf ${wasibasefile}.tar.gz
mv wasi-sdk-19.0 wasi-sdk
rm ${wasibasefile}.tar.gz
cd wamrc
# Download the latest "wamrc" AOT compiler prebuilt by WAMR
wget --quiet https://github.com/bytecodealliance/wasm-micro-runtime/releases/download/WAMR-1.1.2/${wasmbasefile}.tar.gz
tar xzf ${wasmbasefile}.tar.gz
rm ${wasmbasefile}.tar.gz
fi
export WASI_SDK_PATH="${NUTTXTOOLS}/wasi-sdk"
echo "export WASI_SDK_PATH=${NUTTXTOOLS}/wasi-sdk" >> "${NUTTXTOOLS}"/env.sh
command "${WASI_SDK_PATH}"/bin/clang --version
command wamrc --version
}
setup_links() {
# Configure ccache
mkdir -p "${NUTTXTOOLS}"/ccache/bin/
ln -sf "$(which ccache)" "${NUTTXTOOLS}"/ccache/bin/aarch64-none-elf-gcc
ln -sf "$(which ccache)" "${NUTTXTOOLS}"/ccache/bin/aarch64-none-elf-g++
ln -sf "$(which ccache)" "${NUTTXTOOLS}"/ccache/bin/arm-none-eabi-gcc
ln -sf "$(which ccache)" "${NUTTXTOOLS}"/ccache/bin/arm-none-eabi-g++
ln -sf "$(which ccache)" "${NUTTXTOOLS}"/ccache/bin/avr-gcc
ln -sf "$(which ccache)" "${NUTTXTOOLS}"/ccache/bin/avr-g++
ln -sf "$(which ccache)" "${NUTTXTOOLS}"/ccache/bin/cc
ln -sf "$(which ccache)" "${NUTTXTOOLS}"/ccache/bin/c++
ln -sf "$(which ccache)" "${NUTTXTOOLS}"/ccache/bin/clang
ln -sf "$(which ccache)" "${NUTTXTOOLS}"/ccache/bin/clang++
ln -sf "$(which ccache)" "${NUTTXTOOLS}"/ccache/bin/gcc
ln -sf "$(which ccache)" "${NUTTXTOOLS}"/ccache/bin/g++
ln -sf "$(which ccache)" "${NUTTXTOOLS}"/ccache/bin/p32-gcc
ln -sf "$(which ccache)" "${NUTTXTOOLS}"/ccache/bin/rx-elf-gcc
ln -sf "$(which ccache)" "${NUTTXTOOLS}"/ccache/bin/riscv-none-elf-gcc
ln -sf "$(which ccache)" "${NUTTXTOOLS}"/ccache/bin/riscv-none-elf-g++
ln -sf "$(which ccache)" "${NUTTXTOOLS}"/ccache/bin/sparc-gaisler-elf-gcc
ln -sf "$(which ccache)" "${NUTTXTOOLS}"/ccache/bin/sparc-gaisler-elf-g++
ln -sf "$(which ccache)" "${NUTTXTOOLS}"/ccache/bin/x86_64-elf-gcc
ln -sf "$(which ccache)" "${NUTTXTOOLS}"/ccache/bin/x86_64-elf-g++
ln -sf "$(which ccache)" "${NUTTXTOOLS}"/ccache/bin/xtensa-esp32-elf-gcc
ln -sf "$(which ccache)" "${NUTTXTOOLS}"/ccache/bin/xtensa-esp32-elf-g++
ln -sf "$(which ccache)" "${NUTTXTOOLS}"/ccache/bin/xtensa-esp32s2-elf-gcc
ln -sf "$(which ccache)" "${NUTTXTOOLS}"/ccache/bin/xtensa-esp32s2-elf-g++
ln -sf "$(which ccache)" "${NUTTXTOOLS}"/ccache/bin/xtensa-esp32s3-elf-gcc
ln -sf "$(which ccache)" "${NUTTXTOOLS}"/ccache/bin/xtensa-esp32s3-elf-g++
}
install_build_tools() {
mkdir -p "${NUTTXTOOLS}"
echo "#!/usr/bin/env sh" > "${NUTTXTOOLS}"/env.sh
install="arm_clang_toolchain arm_gcc_toolchain arm64_gcc_toolchain bloaty kconfig_frontends mips_gcc_toolchain python_tools riscv_gcc_toolchain rx_gcc_toolchain sparc_gcc_toolchain xtensa_esp32_gcc_toolchain util_linux wasi_sdk"
oldpath=$(cd . && pwd -P)
for func in ${install}; do
${func}
done
cd "${oldpath}"
echo "PATH=${PATH}" >> "${NUTTXTOOLS}"/env.sh
echo "export PATH" >> "${NUTTXTOOLS}"/env.sh
}
install_build_tools
Reference in New Issue View Git Blame Copy Permalink