sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
23b30f7930
nuttx/drivers/input/ft5x06.c
Xiang Xiao 5c80b94820 Replace #include <semaphore.h> to #include <nuttx/semaphore.h> 
Since the kernel side should call nxsem_xxx instead and remove the unused inclusion
2020-02-01 08:27:30 -06:00

1227 lines
35 KiB
C
Raw Blame History

/****************************************************************************
* drivers/input/ft5x06.c
*
* Copyright (C) 2017 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* References:
* "FT5x06", FocalTech Systems Co., Ltd, D-FT5x06-1212-V4.0, Revised
* Dec. 18, 2012
*
* Some of this driver was developed with input from NXP sample code for
* the LPCXpresso-LPC54628 board. That sample code as a compatible BSD
* license:
*
* Copyright (c) 2016, Freescale Semiconductor, Inc.
* Copyright 2016-2017 NXP
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/* The FT5x06 Series ICs are single-chip capacitive touch panel controller
* ICs with a built-in 8 bit Micro-controller unit (MCU). They adopt the
* mutual capacitance approach, which supports true multi-touch capability.
* In conjunction with a mutual capacitive touch panel, the FT5x06 have
* user-friendly input functions, which can be applied on many portable
* devices, such as cellular phones, MIDs, netbook and notebook personal
* computers.
*/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <sys/types.h>
#include <stdbool.h>
#include <stdio.h>
#include <unistd.h>
#include <string.h>
#include <fcntl.h>
#include <poll.h>
#include <errno.h>
#include <assert.h>
#include <debug.h>
#include <nuttx/irq.h>
#include <nuttx/kmalloc.h>
#include <nuttx/arch.h>
#include <nuttx/fs/fs.h>
#include <nuttx/i2c/i2c_master.h>
#include <nuttx/semaphore.h>
#include <nuttx/wqueue.h>
#include <nuttx/wdog.h>
#include <nuttx/input/touchscreen.h>
#include <nuttx/input/ft5x06.h>
#include "ft5x06.h"
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
/* Driver support ***********************************************************/
/* This format is used to construct the /dev/input[n] device driver path. It
* defined here so that it will be used consistently in all places.
*/
#define DEV_FORMAT "/dev/input%d"
#define DEV_NAMELEN 16
/* In polled mode, the polling rate will decrease when there is no touch
* activity. These definitions represent the maximum and the minimum
* polling rates.
*/
#define POLL_MINDELAY MSEC2TICK(50)
#define POLL_MAXDELAY MSEC2TICK(200)
#define POLL_INCREMENT MSEC2TICK(10)
/****************************************************************************
* Private Types
****************************************************************************/
/* This structure describes the state of one FT5x06 driver instance */
struct ft5x06_dev_s
{
uint8_t crefs; /* Number of times the device
* has been opened */
uint8_t nwaiters; /* Number of threads waiting for
* FT5x06 data */
volatile bool valid; /* True: New, valid touch data in
* touchbuf[] */
#ifdef CONFIG_FT5X06_SINGLEPOINT
uint8_t lastid; /* Last reported touch id */
uint8_t lastevent; /* Last reported event */
int16_t lastx; /* Last reported X position */
int16_t lasty; /* Last reported Y position */
#endif
sem_t devsem; /* Manages exclusive access to this
* structure */
sem_t waitsem; /* Used to wait for the
* availability of data */
uint32_t frequency; /* Current I2C frequency */
#ifdef CONFIG_FT5X06_POLLMODE
uint32_t delay; /* Current poll delay */
#endif
FAR const struct ft5x06_config_s *config; /* Board configuration data */
FAR struct i2c_master_s *i2c; /* Saved I2C driver instance */
struct work_s work; /* Supports the interrupt handling
* "bottom half" */
#ifdef CONFIG_FT5X06_POLLMODE
WDOG_ID polltimer; /* Poll timer */
#endif
uint8_t touchbuf[FT5x06_TOUCH_DATA_LEN]; /* Raw touch data */
/* The following is a list if poll structures of threads waiting for
* driver events. The 'struct pollfd' reference for each open is also
* retained in the f_priv field of the 'struct file'.
*/
struct pollfd *fds[CONFIG_FT5X06_NPOLLWAITERS];
};
/****************************************************************************
* Private Function Prototypes
****************************************************************************/
static void ft5x06_notify(FAR struct ft5x06_dev_s *priv);
static void ft5x06_data_worker(FAR void *arg);
#ifdef CONFIG_FT5X06_POLLMODE
static void ft5x06_poll_timeout(int argc, wdparm_t arg1, ...);
#else
static int ft5x06_data_interrupt(int irq, FAR void *context, FAR void *arg);
#endif
static ssize_t ft5x06_sample(FAR struct ft5x06_dev_s *priv, FAR char *buffer,
size_t len);
static ssize_t ft5x06_waitsample(FAR struct ft5x06_dev_s *priv,
FAR char *buffer, size_t len);
static int ft5x06_bringup(FAR struct ft5x06_dev_s *priv);
static void ft5x06_shutdown(FAR struct ft5x06_dev_s *priv);
/* Character driver methods */
static int ft5x06_open(FAR struct file *filep);
static int ft5x06_close(FAR struct file *filep);
static ssize_t ft5x06_read(FAR struct file *filep, FAR char *buffer,
size_t len);
static int ft5x06_ioctl(FAR struct file *filep, int cmd,
unsigned long arg);
static int ft5x06_poll(FAR struct file *filep, struct pollfd *fds,
bool setup);
/****************************************************************************
* Private Data
****************************************************************************/
/* This the vtable that supports the character driver interface */
static const struct file_operations ft5x06_fops =
{
ft5x06_open, /* open */
ft5x06_close, /* close */
ft5x06_read, /* read */
NULL, /* write */
NULL, /* seek */
ft5x06_ioctl, /* ioctl */
ft5x06_poll /* poll */
#ifndef CONFIG_DISABLE_PSEUDOFS_OPERATIONS
, NULL /* unlink */
#endif
};
/* Maps FT5x06 touch events into bit encoded representation used by NuttX */
static const uint8_t g_event_map[4] =
{
(TOUCH_DOWN | TOUCH_ID_VALID | TOUCH_POS_VALID), /* FT5x06_DOWN */
(TOUCH_UP | TOUCH_ID_VALID), /* FT5x06_UP */
(TOUCH_MOVE | TOUCH_ID_VALID | TOUCH_POS_VALID), /* FT5x06_CONTACT */
TOUCH_ID_VALID /* FT5x06_INVALID */
};
/****************************************************************************
* Private Functions
****************************************************************************/
/****************************************************************************
* Name: ft5x06_notify
****************************************************************************/
static void ft5x06_notify(FAR struct ft5x06_dev_s *priv)
{
int i;
/* If there are threads waiting for read data, then signal one of them
* that the read data is available.
*/
if (priv->nwaiters > 0)
{
/* After posting this semaphore, we need to exit because the FT5x06
* is no longer available.
*/
nxsem_post(&priv->waitsem);
}
/* If there are threads waiting on poll() for FT5x06 data to become available,
* then wake them up now. NOTE: we wake up all waiting threads because we
* do not know that they are going to do. If they all try to read the data,
* then some make end up blocking after all.
*/
for (i = 0; i < CONFIG_FT5X06_NPOLLWAITERS; i++)
{
struct pollfd *fds = priv->fds[i];
if (fds)
{
fds->revents |= POLLIN;
iinfo("Report events: %02x\n", fds->revents);
nxsem_post(fds->sem);
}
}
}
/****************************************************************************
* Name: ft5x06_data_worker
****************************************************************************/
static void ft5x06_data_worker(FAR void *arg)
{
FAR struct ft5x06_dev_s *priv = (FAR struct ft5x06_dev_s *)arg;
FAR const struct ft5x06_config_s *config;
FAR struct ft5x06_touch_data_s *sample;
struct i2c_msg_s msg[2];
uint8_t regaddr;
int ret;
/* Get a pointer the callbacks for convenience */
DEBUGASSERT(priv != NULL && priv->config != NULL);
config = priv->config;
/* We need to have exclusive access to the touchbuf so that we do not
* corrupt any read operation that is in place.
*/
nxsem_wait_uninterruptible(&priv->devsem);
/* Read touch data */
/* Set up the address write operation */
regaddr = FT5x06_TOUCH_DATA_STARTREG;
msg[0].frequency = priv->frequency; /* I2C frequency */
msg[0].addr = config->address; /* 7-bit address */
msg[0].flags = 0; /* Write transaction with START */
msg[0].buffer = &regaddr; /* Send one byte of data (no STOP) */
msg[0].length = 1;
/* Set up the data read operation.
*
* REVISIT: If CONFIG_FT5X06_SINGLEPOINT is selected, could we not just
* set the length for one sample? Or is there some reason why we have to
* read all of the points?
*/
msg[1].frequency = priv->frequency; /* I2C frequency */
msg[1].addr = config->address; /* 7-bit address */
msg[1].flags = I2C_M_READ; /* Read transaction with Re-START */
msg[1].buffer = priv->touchbuf; /* Read all touch data */
msg[1].length = FT5x06_TOUCH_DATA_LEN;
ret = I2C_TRANSFER(priv->i2c, msg, 2);
if (ret >= 0)
{
/* In polled mode, we may read invalid touch data. If there is
* no touch data, the FT5x06 returns all 0xff the very first time.
* After that, it returns the same old stale data when there is
* no touch data.
*/
sample = (FAR struct ft5x06_touch_data_s *)priv->touchbuf;
/* Notify waiters (only if we ready some valid data).
*
* REVISIT: For improved performance consider moving the duplicate
* report and thresholding logic from ft5x06_sample() to here. That
* would save a context switch.
*/
if (sample->tdstatus <= FT5x06_MAX_TOUCHES)
{
/* Notify any waiters that new FT5x06 data is available */
priv->valid = true;
ft5x06_notify(priv);
}
#ifdef CONFIG_FT5X06_POLLMODE
/* Update the poll rate */
if (sample->tdstatus > 0 && sample->tdstatus <= FT5x06_MAX_TOUCHES)
{
/* Keep it at the minimum if touches are detected. */
priv->delay = POLL_MINDELAY;
}
else if (priv->delay < POLL_MAXDELAY)
{
/* Otherwise, let the poll rate rise gradually up to the maximum
* if there is no touch.
*/
priv->delay += POLL_INCREMENT;
}
#endif
}
#ifdef CONFIG_FT5X06_POLLMODE
/* Exit, re-starting the poll. */
wd_start(priv->polltimer, priv->delay, ft5x06_poll_timeout, 1, priv);
#else
/* Exit, re-enabling FT5x06 interrupts */
config->enable(config, true);
#endif
nxsem_post(&priv->devsem);
}
/****************************************************************************
* Name: ft5x06_poll_timeout
****************************************************************************/
#ifdef CONFIG_FT5X06_POLLMODE
static void ft5x06_poll_timeout(int argc, wdparm_t arg1, ...)
{
FAR struct ft5x06_dev_s *priv = (FAR struct ft5x06_dev_s *)arg1;
int ret;
/* Transfer processing to the worker thread. Since FT5x06 poll timer is
* disabled while the work is pending, no special action should be
* required to protected the work queue.
*/
DEBUGASSERT(priv->work.worker == NULL);
ret = work_queue(HPWORK, &priv->work, ft5x06_data_worker, priv, 0);
if (ret != 0)
{
ierr("ERROR: Failed to queue work: %d\n", ret);
}
}
#endif
/****************************************************************************
* Name: ft5x06_data_interrupt
****************************************************************************/
#ifndef CONFIG_FT5X06_POLLMODE
static int ft5x06_data_interrupt(int irq, FAR void *context, FAR void *arg)
{
FAR struct ft5x06_dev_s *priv = (FAR struct ft5x06_dev_s *)arg;
FAR const struct ft5x06_config_s *config;
int ret;
/* Get a pointer the callbacks for convenience (and so the code is not so
* ugly).
*/
config = priv->config;
DEBUGASSERT(config != NULL);
/* Disable further interrupts */
config->enable(config, false);
/* Transfer processing to the worker thread. Since FT5x06 interrupts are
* disabled while the work is pending, no special action should be required
* to protected the work queue.
*/
DEBUGASSERT(priv->work.worker == NULL);
ret = work_queue(HPWORK, &priv->work, ft5x06_data_worker, priv, 0);
if (ret != 0)
{
ierr("ERROR: Failed to queue work: %d\n", ret);
}
/* Clear any pending interrupts and return success */
config->clear(config);
return OK;
}
#endif
/****************************************************************************
* Name: ft5x06_sample
****************************************************************************/
#ifdef CONFIG_FT5X06_SINGLEPOINT
static ssize_t ft5x06_sample(FAR struct ft5x06_dev_s *priv, FAR char *buffer,
size_t len)
{
FAR struct ft5x06_touch_data_s *raw;
FAR struct ft5x06_touch_point_s *touch;
FAR struct touch_sample_s *sample;
FAR struct touch_point_s *point;
int16_t x;
int16_t y;
uint8_t event;
uint8_t id;
if (!priv->valid)
{
return 0; /* Nothing to read */
}
/* Raw data pointers (source) */
raw = (FAR struct ft5x06_touch_data_s *)priv->touchbuf;
touch = raw->touch;
/* Get the reported X and Y positions */
#ifdef CONFIG_FT5X06_SWAPXY
y = TOUCH_POINT_GET_X(touch[0]);
x = TOUCH_POINT_GET_Y(touch[0]);
#else
x = TOUCH_POINT_GET_X(touch[0]);
y = TOUCH_POINT_GET_Y(touch[0]);
#endif
/* Get the touch point ID and event */
event = TOUCH_POINT_GET_EVENT(touch[0]);
id = TOUCH_POINT_GET_ID(touch[0]);
if (event == FT5x06_INVALID)
{
priv->lastevent = FT5x06_INVALID;
goto reset_and_drop;
}
if (id == priv->lastid && event == priv->lastevent)
{
/* Same ID and event.. Is there positional data? */
if (raw->tdstatus == 0 || event == FT5x06_UP)
{
/* No... no new touch data */
goto reset_and_drop;
}
else
{
int16_t deltax;
int16_t deltay;
/* Compare the change in position from the last report. */
deltax = (x - priv->lastx);
if (deltax < 0)
{
deltax = -deltax;
}
if (deltax < CONFIG_FT5X06_THRESHX)
{
/* There as been no significant change in X, try Y */
deltay = (y - priv->lasty);
if (deltay < 0)
{
deltay = -deltay;
}
if (deltax < CONFIG_FT5X06_THRESHX)
{
/* Ignore... no significant change in Y either */
goto drop;
}
}
}
}
priv->lastid = id;
priv->lastevent = event;
priv->lastx = x;
priv->lasty = y;
/* User data buffer points (sink) */
/* Return the number of touches read */
sample = (FAR struct touch_sample_s *)buffer;
sample->npoints = 1;
/* Decode and return the single touch point */
point = sample->point;
point[0].id = id;
point[0].flags = g_event_map[event];
point[0].x = x;
point[0].y = y;
point[0].h = 0;
point[0].w = 0;
point[0].pressure = 0;
priv->valid = false;
return SIZEOF_TOUCH_SAMPLE_S(1);
reset_and_drop:
priv->lastx = 0;
priv->lasty = 0;
drop:
priv->valid = false;
return 0; /* No new touches read. */
}
#else
static ssize_t ft5x06_sample(FAR struct ft5x06_dev_s *priv, FAR char *buffer,
size_t len)
{
FAR struct ft5x06_touch_data_s *raw;
FAR struct ft5x06_touch_point_s *touch;
FAR struct touch_sample_s *sample;
FAR struct touch_point_s *point;
unsigned int maxtouches;
unsigned int ntouches;
int i;
maxtouches = (len - sizeof(int)) / sizeof(struct touch_point_s);
DEBUGASSERT(maxtouches > 0); /* Already verified */
if (!priv->valid)
{
return 0; /* Nothing to read */
}
/* Raw data pointers (source) */
raw = (FAR struct ft5x06_touch_data_s *)priv->touchbuf;
touch = raw->touch;
/* Decode number of touches */
ntouches = raw->tdstatus;
DEBUGASSERT(ntouches <= FT5x06_MAX_TOUCHES);
if (ntouches > maxtouches)
{
ntouches = maxtouches;
}
if (ntouches < 1)
{
priv->valid = false;
return 0; /* No touches read. */
}
/* User data buffer points (sink) */
sample = (FAR struct touch_sample_s *)buffer;
point = sample->point;
/* Return the number of touches read */
sample->npoints = ntouches;
/* Decode and return the touch points */
for (i = 0; i < ntouches; i++)
{
int event = TOUCH_POINT_GET_EVENT(touch[i]);
point[i].id = TOUCH_POINT_GET_ID(touch[i]);
point[i].flags = g_event_map[event];
#ifdef CONFIG_FT5X06_SWAPXY
point[i].y = TOUCH_POINT_GET_X(touch[i]);
point[i].x = TOUCH_POINT_GET_Y(touch[i]);
#else
point[i].x = TOUCH_POINT_GET_X(touch[i]);
point[i].y = TOUCH_POINT_GET_Y(touch[i]);
#endif
point[i].h = 0;
point[i].w = 0;
point[i].pressure = 0;
}
priv->valid = false;
return SIZEOF_TOUCH_SAMPLE_S(ntouches);
}
#endif /* CONFIG_FT5X06_SINGLEPOINT */
/****************************************************************************
* Name: ft5x06_waitsample
****************************************************************************/
static ssize_t ft5x06_waitsample(FAR struct ft5x06_dev_s *priv,
FAR char *buffer, size_t len)
{
int ret;
/* Disable pre-emption to prevent other threads from getting control while
* we muck with the semaphores.
*/
sched_lock();
/* Now release the semaphore that manages mutually exclusive access to
* the device structure. This may cause other tasks to become ready to
* run, but they cannot run yet because pre-emption is disabled.
*/
nxsem_post(&priv->devsem);
/* Try to get the a sample... if we cannot, then wait on the semaphore
* that is posted when new sample data is available.
*/
while (!priv->valid)
{
/* Increment the count of waiters */
priv->nwaiters++;
/* Wait for a change in the FT5x06 state */
ret = nxsem_wait(&priv->waitsem);
priv->nwaiters--;
if (ret < 0)
{
ierr("ERROR: nxsem_wait failed: %d\n", ret);
goto errout;
}
}
/* Re-acquire the semaphore that manages mutually exclusive access to
* the device structure. We may have to wait here. But we have our sample.
* Interrupts and pre-emption will be re-enabled while we wait.
*/
ret = nxsem_wait(&priv->devsem);
if (ret >= 0)
{
/* Now sample the data.
*
* REVISIT: Is it safe to assume that priv->valid will always be
* true? I think that sched_lock() whould protect the setting.
*/
ret = ft5x06_sample(priv, buffer, len);
}
errout:
/* Restore pre-emption. We might get suspended here but that is okay
* because we already have our sample. Note: this means that if there
* were two threads reading from the FT5x06 for some reason, the data
* might be read out of order.
*/
sched_unlock();
return ret;
}
/****************************************************************************
* Name: ft5x06_bringup
****************************************************************************/
static int ft5x06_bringup(FAR struct ft5x06_dev_s *priv)
{
FAR const struct ft5x06_config_s *config;
struct i2c_msg_s msg;
uint8_t data[2];
int ret;
/* Get a pointer the callbacks for convenience (and so the code is not so
* ugly).
*/
config = priv->config;
DEBUGASSERT(config != NULL);
/* Set device mode to normal operation */
data[0] = FT5x06_TOUCH_MODE_REG; /* Register address */
data[1] = FT5x06_DEV_MODE_WORKING; /* Normal mode */
msg.frequency = priv->frequency; /* I2C frequency */
msg.addr = config->address; /* 7-bit address */
msg.flags = 0; /* Write transaction with START */
msg.buffer = data; /* Send two bytes followed by STOP */
msg.length = 2;
ret = I2C_TRANSFER(priv->i2c, &msg, 1);
if (ret < 0)
{
return ret;
}
#ifndef CONFIG_FT5X06_POLLMODE
/* Enable FT5x06 interrupts */
config->clear(config);
config->enable(config, true);
#endif
return OK;
}
/****************************************************************************
* Name: ft5x06_shutdown
****************************************************************************/
static void ft5x06_shutdown(FAR struct ft5x06_dev_s *priv)
{
#ifdef CONFIG_FT5X06_POLLMODE
/* Stop the poll timer */
wd_cancel(priv->polltimer);
#else
FAR const struct ft5x06_config_s *config = priv->config;
/* Make sure that the FT5x06 interrupt is disabled */
config->clear(config);
config->enable(config, false);
#endif
}
/****************************************************************************
* Name: ft5x06_open
****************************************************************************/
static int ft5x06_open(FAR struct file *filep)
{
FAR struct inode *inode;
FAR struct ft5x06_dev_s *priv;
uint8_t tmp;
int ret;
DEBUGASSERT(filep);
inode = filep->f_inode;
DEBUGASSERT(inode && inode->i_private);
priv = (FAR struct ft5x06_dev_s *)inode->i_private;
/* Get exclusive access to the driver data structure */
ret = nxsem_wait(&priv->devsem);
if (ret < 0)
{
ierr("ERROR: nxsem_wait failed: %d\n", ret);
return ret;
}
/* Increment the reference count */
tmp = priv->crefs + 1;
if (tmp == 0)
{
/* More than 255 opens; uint8_t overflows to zero */
ret = -EMFILE;
goto errout_with_sem;
}
/* When the reference increments to 1, this is the first open event
* on the driver.. and the time when we must initialize the driver.
*/
if (tmp == 1)
{
ret = ft5x06_bringup(priv);
if (ret < 0)
{
ierr("ERROR: ft5x06_bringup failed: %d\n", ret);
goto errout_with_sem;
}
}
/* Save the new open count on success */
priv->crefs = tmp;
errout_with_sem:
nxsem_post(&priv->devsem);
return ret;
}
/****************************************************************************
* Name: ft5x06_close
****************************************************************************/
static int ft5x06_close(FAR struct file *filep)
{
FAR struct inode *inode;
FAR struct ft5x06_dev_s *priv;
int ret;
DEBUGASSERT(filep);
inode = filep->f_inode;
DEBUGASSERT(inode && inode->i_private);
priv = (FAR struct ft5x06_dev_s *)inode->i_private;
/* Get exclusive access to the driver data structure */
ret = nxsem_wait(&priv->devsem);
if (ret < 0)
{
ierr("ERROR: nxsem_wait failed: %d\n", ret);
return ret;
}
/* Decrement the reference count unless it would decrement a negative
* value.
*/
if (priv->crefs >= 1)
{
priv->crefs--;
}
/* When the count decrements to zero, there are no further open references
* to the driver and it can be uninitialized.
*/
if (priv->crefs == 0)
{
ft5x06_shutdown(priv);
}
nxsem_post(&priv->devsem);
return OK;
}
/****************************************************************************
* Name: ft5x06_read
****************************************************************************/
static ssize_t ft5x06_read(FAR struct file *filep, FAR char *buffer,
size_t len)
{
FAR struct inode *inode;
FAR struct ft5x06_dev_s *priv;
int ret;
DEBUGASSERT(filep);
inode = filep->f_inode;
DEBUGASSERT(inode && inode->i_private);
priv = (FAR struct ft5x06_dev_s *)inode->i_private;
/* Verify that the caller has provided a buffer large enough to receive
* the touch data.
*/
if (len < SIZEOF_TOUCH_SAMPLE_S(1))
{
/* We could provide logic to break up a touch report into segments and
* handle smaller reads... but why?
*/
return -ENOSYS;
}
/* Get exclusive access to the driver data structure */
ret = nxsem_wait(&priv->devsem);
if (ret < 0)
{
ierr("ERROR: nxsem_wait failed: %d\n", ret);
return ret;
}
/* Try to read sample data. */
ret = ft5x06_sample(priv, buffer, len);
while (ret == 0)
{
/* Sample data is not available now. We would have to wait to receive
* sample data. If the user has specified the O_NONBLOCK option, then
* just return an error.
*/
if (filep->f_oflags & O_NONBLOCK)
{
ret = -EAGAIN;
goto errout;
}
/* Wait for sample data */
ret = ft5x06_waitsample(priv, buffer, len);
if (ret < 0)
{
/* We might have been awakened by a signal */
goto errout;
}
}
ret = SIZEOF_TOUCH_SAMPLE_S(1);
errout:
nxsem_post(&priv->devsem);
return ret;
}
/****************************************************************************
* Name: ft5x06_ioctl
****************************************************************************/
static int ft5x06_ioctl(FAR struct file *filep, int cmd, unsigned long arg)
{
FAR struct inode *inode;
FAR struct ft5x06_dev_s *priv;
int ret;
iinfo("cmd: %d arg: %ld\n", cmd, arg);
DEBUGASSERT(filep);
inode = filep->f_inode;
DEBUGASSERT(inode && inode->i_private);
priv = (FAR struct ft5x06_dev_s *)inode->i_private;
/* Get exclusive access to the driver data structure */
ret = nxsem_wait(&priv->devsem);
if (ret < 0)
{
ierr("ERROR: nxsem_wait failed: %d\n", ret);
return ret;
}
/* Process the IOCTL by command */
switch (cmd)
{
case TSIOC_SETFREQUENCY: /* arg: Pointer to uint32_t frequency value */
{
FAR uint32_t *ptr = (FAR uint32_t *)((uintptr_t)arg);
DEBUGASSERT(priv->config != NULL && ptr != NULL);
priv->frequency = *ptr;
}
break;
case TSIOC_GETFREQUENCY: /* arg: Pointer to uint32_t frequency value */
{
FAR uint32_t *ptr = (FAR uint32_t *)((uintptr_t)arg);
DEBUGASSERT(priv->config != NULL && ptr != NULL);
*ptr = priv->frequency;
}
break;
default:
ret = -ENOTTY;
break;
}
nxsem_post(&priv->devsem);
return ret;
}
/****************************************************************************
* Name: ft5x06_poll
****************************************************************************/
static int ft5x06_poll(FAR struct file *filep, FAR struct pollfd *fds,
bool setup)
{
FAR struct inode *inode;
FAR struct ft5x06_dev_s *priv;
int ret;
int i;
iinfo("setup: %d\n", (int)setup);
DEBUGASSERT(filep && fds);
inode = filep->f_inode;
DEBUGASSERT(inode && inode->i_private);
priv = (FAR struct ft5x06_dev_s *)inode->i_private;
/* Are we setting up the poll? Or tearing it down? */
ret = nxsem_wait(&priv->devsem);
if (ret < 0)
{
ierr("ERROR: nxsem_wait failed: %d\n", ret);
return ret;
}
if (setup)
{
/* Ignore waits that do not include POLLIN */
if ((fds->events & POLLIN) == 0)
{
ierr("ERROR: Missing POLLIN: revents: %08x\n", fds->revents);
ret = -EDEADLK;
goto errout;
}
/* This is a request to set up the poll. Find an available
* slot for the poll structure reference
*/
for (i = 0; i < CONFIG_FT5X06_NPOLLWAITERS; i++)
{
/* Find an available slot */
if (!priv->fds[i])
{
/* Bind the poll structure and this slot */
priv->fds[i] = fds;
fds->priv = &priv->fds[i];
break;
}
}
if (i >= CONFIG_FT5X06_NPOLLWAITERS)
{
ierr("ERROR: No available slot found: %d\n", i);
fds->priv = NULL;
ret = -EBUSY;
goto errout;
}
/* Should we immediately notify on any of the requested events? */
if (priv->valid)
{
ft5x06_notify(priv);
}
}
else if (fds->priv)
{
/* This is a request to tear down the poll. */
struct pollfd **slot = (struct pollfd **)fds->priv;
DEBUGASSERT(slot != NULL);
/* Remove all memory of the poll setup */
*slot = NULL;
fds->priv = NULL;
}
errout:
nxsem_post(&priv->devsem);
return ret;
}
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: ft5x06_register
*
* Description:
* Configure the FT5x06 to use the provided I2C device instance. This
* will register the driver as /dev/inputN where N is the minor device
* number
*
* Input Parameters:
* dev - An I2C driver instance
* config - Persistant board configuration data
* minor - The input device minor number
*
* Returned Value:
* Zero is returned on success. Otherwise, a negated errno value is
* returned to indicate the nature of the failure.
*
****************************************************************************/
int ft5x06_register(FAR struct i2c_master_s *i2c,
FAR const struct ft5x06_config_s *config, int minor)
{
FAR struct ft5x06_dev_s *priv;
char devname[DEV_NAMELEN];
int ret;
iinfo("i2c: %p minor: %d\n", i2c, minor);
/* Debug-only sanity checks */
DEBUGASSERT(i2c != NULL && config != NULL && minor >= 0 && minor < 100);
#ifdef CONFIG_FT5X06_POLLMODE
DEBUGASSERT(config->wakeup != NULL && config->nreset != NULL);
#else
DEBUGASSERT(config->attach != NULL && config->enable != NULL &&
config->clear != NULL && config->wakeup != NULL &&
config->nreset != NULL);
#endif
/* Create and initialize a FT5x06 device driver instance */
priv = (FAR struct ft5x06_dev_s *)kmm_zalloc(sizeof(struct ft5x06_dev_s));
if (!priv)
{
ierr("ERROR: kmm_zalloc(%d) failed\n", sizeof(struct ft5x06_dev_s));
return -ENOMEM;
}
/* Initialize the FT5x06 device driver instance */
priv->i2c = i2c; /* Save the I2C device handle */
priv->config = config; /* Save the board configuration */
priv->frequency = config->frequency; /* Set the current I2C frequency */
nxsem_init(&priv->devsem, 0, 1); /* Initialize device structure semaphore */
nxsem_init(&priv->waitsem, 0, 0); /* Initialize pen event wait semaphore */
/* The event wait semaphore is used for signaling and, hence, should not
* have priority inheritance enabled.
*/
nxsem_setprotocol(&priv->waitsem, SEM_PRIO_NONE);
#ifdef CONFIG_FT5X06_POLLMODE
/* Allocate a timer for polling the FT5x06 */
priv->delay = POLL_MAXDELAY;
priv->polltimer = wd_create();
if (priv->polltimer == NULL)
{
ierr("ERROR: Failed to allocate polltimer\n");
ret = -EBUSY;
goto errout_with_priv;
}
#else
/* Make sure that the FT5x06 interrupt interrupt is disabled */
config->clear(config);
config->enable(config, false);
/* Attach the interrupt handler */
ret = config->attach(config, ft5x06_data_interrupt,
priv);
if (ret < 0)
{
ierr("ERROR: Failed to attach interrupt\n");
goto errout_with_timer;
}
#endif
/* Register the device as an input device */
snprintf(devname, DEV_NAMELEN, DEV_FORMAT, minor);
iinfo("Registering %s\n", devname);
ret = register_driver(devname, &ft5x06_fops, 0666, priv);
if (ret < 0)
{
ierr("ERROR: register_driver() failed: %d\n", ret);
goto errout_with_timer;
}
/* Schedule work to perform the initial sampling and to set the data
* availability conditions.
*/
ret = work_queue(HPWORK, &priv->work, ft5x06_data_worker, priv, 0);
if (ret < 0)
{
ierr("ERROR: Failed to queue work: %d\n", ret);
goto errout_with_timer;
}
/* And return success */
return OK;
errout_with_timer:
#ifdef CONFIG_FT5X06_POLLMODE
wd_delete(priv->polltimer);
errout_with_priv:
#endif
nxsem_destroy(&priv->devsem);
kmm_free(priv);
return ret;
}
Reference in New Issue View Git Blame Copy Permalink