nuttx/drivers/net
2017-08-21 16:23:22 -06:00
..
cs89x0.c net: network drver now retains Ethernet MAC address in a union so that other link layer addresses may be used in a MULTILINK environment. 2017-04-22 11:10:30 -06:00
cs89x0.h Email address change in nuttx/ 2012-09-13 18:32:24 +00:00
dm90x0.c net: network drver now retains Ethernet MAC address in a union so that other link layer addresses may be used in a MULTILINK environment. 2017-04-22 11:10:30 -06:00
enc28j60.c Add an instance argument to the SPIDEV definitions. 2017-04-29 12:26:52 -06:00
enc28j60.h Most cosmetic but also includes a fix for a compile problem from Ken Pettit 2015-12-01 12:54:57 -06:00
encx24j600.c ENCX24J600: Fix some warnings. Update interface to use newer parameter passing to interrupt handlers 2017-08-21 16:23:22 -06:00
encx24j600.h ENCX24J600: Use the ENC's SRAM from multiple TX packets. From Max Holtzberg 2013-08-26 09:11:58 -06:00
ftmac100.c net: network drver now retains Ethernet MAC address in a union so that other link layer addresses may be used in a MULTILINK environment. 2017-04-22 11:10:30 -06:00
Kconfig Networking: Remove driver based backlog support. This affects the entire network, but is used by only one driver. The only supported with of supported RX backlog is via common read-ahead buffering. 2017-08-21 06:28:59 -06:00
loopback.c Fix IPv6 loopback driver that depended on the removed g_ipv6_allonesaddr. Noted by Masayuki Ishikawa 2017-08-09 06:59:55 -06:00
Make.defs Remove RGMP and RGMP drivers. 2016-12-02 09:49:33 -06:00
phy_notify.c Remove CONFIG_NETDEV_MULTINIC. This increases code size by a little, but greatly reduces the complexity of the network code. 2017-08-08 14:24:12 -06:00
skeleton.c Fix some minor issues in drivers/net/skeleton.c 2017-07-24 15:38:13 -06:00
slip.c Be consistent... Use Name: consistent in function headers vs Function: 2017-04-21 16:33:14 -06:00
telnet.c Without lowsyslog() *llerr() is not useful. Eliminate and replace with *err(). 2016-06-20 12:44:38 -06:00
tun.c drivers/net/tun.c: Currently cannot support TAP mode unless Ethenet is enabled 2017-08-20 12:01:38 -06:00