nuttx/sched/irq/irq.h
Gregory Nutt 8fdbb1e0a4 Elimate use of the non-standard type systime_t and replace it the equivalent, standard type clock_t
Squashed commit of the following:

    sched:  Rename all use of system_t to clock_t.
    syscall:  Rename all use of system_t to clock_t.
    net:  Rename all use of system_t to clock_t.
    libs:  Rename all use of system_t to clock_t.
    fs:  Rename all use of system_t to clock_t.
    drivers:  Rename all use of system_t to clock_t.
    arch:  Rename all use of system_t to clock_t.
    include:  Remove definition of systime_t; rename all use of system_t to clock_t.
2018-06-16 12:16:13 -06:00

236 lines
8.2 KiB
C

/****************************************************************************
* sched/irq/irq.h
*
* Copyright (C) 2007, 2008, 2013-2014, 2017-2018 Gregory Nutt. All rights
* reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
#ifndef __SCHED_IRQ_IRQ_H
#define __SCHED_IRQ_IRQ_H
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <nuttx/compiler.h>
#include <sys/types.h>
#include <stdbool.h>
#include <nuttx/arch.h>
#include <nuttx/irq.h>
#include <nuttx/spinlock.h>
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
#if defined(CONFIG_ARCH_MINIMAL_VECTORTABLE) && \
!defined(CONFIG_ARCH_NUSER_INTERRUPTS)
# error CONFIG_ARCH_NUSER_INTERRUPTS is not defined
#endif
/****************************************************************************
* Public Types
****************************************************************************/
/* This is the type of the list of interrupt handlers, one for each IRQ.
* This type provided all of the information necessary to irq_dispatch to
* transfer control to interrupt handlers after the occurrence of an
* interrupt.
*/
struct irq_info_s
{
xcpt_t handler; /* Address of the interrupt handler */
FAR void *arg; /* The argument provided to the interrupt handler. */
#ifdef CONFIG_SCHED_IRQMONITOR
clock_t start; /* Time interrupt attached */
#ifdef CONFIG_HAVE_LONG_LONG
uint64_t count; /* Number of interrupts on this IRQ */
#else
uint32_t mscount; /* Number of interrupts on this IRQ (MS) */
uint32_t lscount; /* Number of interrupts on this IRQ (LS) */
#endif
#endif
};
#ifdef CONFIG_SCHED_IRQMONITOR
/* This is the type of the callback from irq_foreach(). */
typedef CODE int (*irq_foreach_t)(int irq, FAR struct irq_info_s *info,
FAR void *arg);
#endif
/****************************************************************************
* Public Data
****************************************************************************/
/* This is the list of interrupt handlers, one for each IRQ. This is used
* by irq_dispatch to transfer control to interrupt handlers after the
* occurrence of an interrupt.
*/
#ifdef CONFIG_ARCH_MINIMAL_VECTORTABLE
extern struct irq_info_s g_irqvector[CONFIG_ARCH_NUSER_INTERRUPTS];
#else
extern struct irq_info_s g_irqvector[NR_IRQS];
#endif
#ifdef CONFIG_ARCH_MINIMAL_VECTORTABLE
/* This is the interrupt vector mapping table. This must be provided by
* architecture specific logic if CONFIG_ARCH_MINIMAL_VECTORTABLE is define
* in the configuration.
*
* REVISIT: This should be declared in include/nuttx/irq.h. The declaration
* at that location, however, introduces a circular include dependency so the
* declaration is here for the time being.
*/
extern const irq_mapped_t g_irqmap[NR_IRQS];
#endif
#ifdef CONFIG_SMP
/* This is the spinlock that enforces critical sections when interrupts are
* disabled.
*/
extern volatile spinlock_t g_cpu_irqlock SP_SECTION;
/* Used to keep track of which CPU(s) hold the IRQ lock. */
extern volatile spinlock_t g_cpu_irqsetlock SP_SECTION;
extern volatile cpu_set_t g_cpu_irqset SP_SECTION;
/* Handles nested calls to enter_critical section from interrupt handlers */
extern volatile uint8_t g_cpu_nestcount[CONFIG_SMP_NCPUS];
#endif
/****************************************************************************
* Public Function Prototypes
****************************************************************************/
#ifdef __cplusplus
#define EXTERN extern "C"
extern "C"
{
#else
#define EXTERN extern
#endif
/****************************************************************************
* Name: irq_initialize
*
* Description:
* Configure the IRQ subsystem
*
****************************************************************************/
void weak_function irq_initialize(void);
/****************************************************************************
* Name: irq_unexpected_isr
*
* Description:
* An interrupt has been received for an IRQ that was never registered
* with the system.
*
****************************************************************************/
int irq_unexpected_isr(int irq, FAR void *context, FAR void *arg);
/****************************************************************************
* Name: irq_cpu_locked
*
* Description:
* Test if the IRQ lock set OR if this CPU holds the IRQ lock
* There is an interaction with pre-emption controls and IRQ locking:
* Even if the pre-emption is enabled, tasks will be forced to pend if
* the IRQ lock is also set UNLESS the CPU starting the task is the
* holder of the IRQ lock.
*
* Input Parameters:
* rtcb - Points to the blocked TCB that is ready-to-run
*
* Returned Value:
* true - IRQs are locked by a different CPU.
* false - IRQs are unlocked OR if they are locked BUT this CPU
* is the holder of the lock.
*
* Warning: This values are volatile at only valid at the instance that
* the CPU set was queried.
*
****************************************************************************/
#ifdef CONFIG_SMP
bool irq_cpu_locked(int cpu);
#endif
/****************************************************************************
* Name: irq_foreach
*
* Description:
* This function traverses the internal list of interrupts and provides
* information about each attached interrupt.
*
* Some caution may be necessary: If interrupts are disabled then the
* counts may change during the traversal. If pre-emption is enabled, then
* the traversed sequence may be widely separated in time.
*
* Input Parameters:
* callback - This function will be called for each attached interrupt
* along with the IRQ number, an instance of struct irq_info_s,
* and the caller provided argument
* args - This is an opaque argument provided with each call to the
* callback function.
*
* Returned Value:
* Zero (OK) is returned after callback has been invoked for all of
* the attached interrupts. The callback function may terminate the
* traversal at any time by returning a non-zero value. In that case,
* irq_foreach will return that non-zero value.
*
****************************************************************************/
#ifdef CONFIG_SCHED_IRQMONITOR
int irq_foreach(irq_foreach_t callback, FAR void *arg);
#endif
#undef EXTERN
#ifdef __cplusplus
}
#endif
#endif /* __SCHED_IRQ_IRQ_H */