26d1e5ab3f
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4782 42af7a65-404d-4744-a932-0658087f49c3
267 lines
8.1 KiB
C
267 lines
8.1 KiB
C
/****************************************************************************
|
|
* drivers/input/stmpe11_adc.c
|
|
*
|
|
* Copyright (C) 2012 Gregory Nutt. All rights reserved.
|
|
* Author: Gregory Nutt <gnutt@nuttx.org>
|
|
*
|
|
* References:
|
|
* "STMPE811 S-Touch® advanced resistive touchscreen controller with 8-bit
|
|
* GPIO expander," Doc ID 14489 Rev 6, CD00186725, STMicroelectronics"
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
*
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in
|
|
* the documentation and/or other materials provided with the
|
|
* distribution.
|
|
* 3. Neither the name NuttX nor the names of its contributors may be
|
|
* used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
|
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
|
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
|
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
|
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
|
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
|
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
* POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
****************************************************************************/
|
|
|
|
/****************************************************************************
|
|
* Included Files
|
|
****************************************************************************/
|
|
|
|
#include <nuttx/config.h>
|
|
|
|
#include <unistd.h>
|
|
#include <assert.h>
|
|
#include <errno.h>
|
|
#include <debug.h>
|
|
|
|
#include <nuttx/arch.h>
|
|
#include <nuttx/input/stmpe11.h>
|
|
|
|
#include "stmpe11.h"
|
|
|
|
#if defined(CONFIG_INPUT) && defined(CONFIG_INPUT_STMPE11) && !defined(CONFIG_STMPE11_ADC_DISABLE)
|
|
|
|
/****************************************************************************
|
|
* Private Types
|
|
****************************************************************************/
|
|
|
|
/****************************************************************************
|
|
* Private Data
|
|
****************************************************************************/
|
|
|
|
/****************************************************************************
|
|
* Private Functions
|
|
****************************************************************************/
|
|
|
|
/****************************************************************************
|
|
* Public Functions
|
|
****************************************************************************/
|
|
|
|
/****************************************************************************
|
|
* Name: stmpe11_adcinitialize
|
|
*
|
|
* Description:
|
|
* Configure for ADC mode operation. Set overall ADC ADC timing that
|
|
* applies to all pins.
|
|
*
|
|
* Input Parameters:
|
|
* handle - The handle previously returned by stmpe11_instantiate
|
|
*
|
|
* Returned Value:
|
|
* Zero is returned on success. Otherwise, a negated errno value is
|
|
* returned to indicate the nature of the failure.
|
|
*
|
|
****************************************************************************/
|
|
|
|
int stmpe11_adcinitialize(STMPE11_HANDLE handle)
|
|
{
|
|
FAR struct stmpe11_dev_s *priv = (FAR struct stmpe11_dev_s *)handle;
|
|
uint8_t regval;
|
|
int ret;
|
|
|
|
DEBUGASSERT(handle);
|
|
|
|
/* Get exclusive access to the device structure */
|
|
|
|
ret = sem_wait(&priv->exclsem);
|
|
if (ret < 0)
|
|
{
|
|
int errval = errno;
|
|
idbg("sem_wait failed: %d\n", errval);
|
|
return -errval;
|
|
}
|
|
|
|
/* Enable Clocking for ADC */
|
|
|
|
regval = stmpe11_getreg8(priv, STMPE11_SYS_CTRL2);
|
|
regval &= ~SYS_CTRL2_ADC_OFF;
|
|
stmpe11_putreg8(priv, STMPE11_SYS_CTRL2, regval);
|
|
|
|
/* Select Sample Time, bit number and ADC Reference */
|
|
|
|
stmpe11_putreg8(priv, STMPE11_ADC_CTRL1, priv->config->ctrl1);
|
|
|
|
/* Wait for 20 ms */
|
|
|
|
up_mdelay(20);
|
|
|
|
/* Select the ADC clock speed */
|
|
|
|
stmpe11_putreg8(priv, STMPE11_ADC_CTRL2, priv->config->ctrl2);
|
|
|
|
/* Mark ADC initialized */
|
|
|
|
priv->flags |= STMPE11_FLAGS_ADC_INITIALIZED;
|
|
sem_post(&priv->exclsem);
|
|
return OK;
|
|
}
|
|
|
|
/****************************************************************************
|
|
* Name: stmpe11_adcconfig
|
|
*
|
|
* Description:
|
|
* Configure a pin for ADC input.
|
|
*
|
|
* Input Parameters:
|
|
* handle - The handle previously returned by stmpe11_instantiate
|
|
* pin - The ADC pin number
|
|
*
|
|
* Returned Value:
|
|
* Zero is returned on success. Otherwise, a negated errno value is
|
|
* returned to indicate the nature of the failure.
|
|
*
|
|
****************************************************************************/
|
|
|
|
int stmpe11_adcconfig(STMPE11_HANDLE handle, int pin)
|
|
{
|
|
FAR struct stmpe11_dev_s *priv = (FAR struct stmpe11_dev_s *)handle;
|
|
uint8_t pinmask = GPIO_PIN(pin);
|
|
uint8_t regval;
|
|
int ret;
|
|
|
|
DEBUGASSERT(handle && (unsigned)pin < STMPE11_ADC_NPINS);
|
|
|
|
/* Get exclusive access to the device structure */
|
|
|
|
ret = sem_wait(&priv->exclsem);
|
|
if (ret < 0)
|
|
{
|
|
int errval = errno;
|
|
idbg("sem_wait failed: %d\n", errval);
|
|
return -errval;
|
|
}
|
|
|
|
/* Make sure that the pin is not already in use */
|
|
|
|
if ((priv->inuse & pinmask) != 0)
|
|
{
|
|
idbg("PIN%d is already in-use\n", pin);
|
|
sem_post(&priv->exclsem);
|
|
return -EBUSY;
|
|
}
|
|
|
|
/* Clear the alternate function bit for the pin, making it an ADC input
|
|
* (or perhaps an an external reference, depending on the state of the
|
|
* ADC_CTRL1_REF_SEL bit).
|
|
*/
|
|
|
|
regval = stmpe11_getreg8(priv, STMPE11_GPIO_AF);
|
|
regval &= ~pinmask;
|
|
stmpe11_putreg8(priv, STMPE11_GPIO_AF, regval);
|
|
|
|
/* Mark the pin as 'in use' */
|
|
|
|
priv->inuse |= pinmask;
|
|
sem_post(&priv->exclsem);
|
|
return OK;
|
|
}
|
|
|
|
/****************************************************************************
|
|
* Name: stmpe11_adcread
|
|
*
|
|
* Description:
|
|
* Read the converted analog input value from the select pin.
|
|
*
|
|
* Input Parameters:
|
|
* handle - The handle previously returned by stmpe11_instantiate
|
|
* pin - The ADC pin number
|
|
*
|
|
* Returned Value:
|
|
* The converted value (there is no error reporting mechanism).
|
|
*
|
|
****************************************************************************/
|
|
|
|
uint16_t stmpe11_adcread(STMPE11_HANDLE handle, int pin)
|
|
{
|
|
FAR struct stmpe11_dev_s *priv = (FAR struct stmpe11_dev_s *)handle;
|
|
uint8_t pinmask = GPIO_PIN(pin);
|
|
uint8_t regval;
|
|
int i;
|
|
int ret;
|
|
|
|
DEBUGASSERT(handle && (unsigned)pin < 8);
|
|
|
|
/* Get exclusive access to the device structure */
|
|
|
|
ret = sem_wait(&priv->exclsem);
|
|
if (ret < 0)
|
|
{
|
|
int errval = errno;
|
|
idbg("sem_wait failed: %d\n", errval);
|
|
return -errval;
|
|
}
|
|
|
|
/* Request AD conversion by setting the bit corresponding the pin in the
|
|
* ADC CAPT register.
|
|
*/
|
|
|
|
stmpe11_putreg8(priv, STMPE11_ADC_CAPT, pinmask);
|
|
|
|
/* Wait for the conversion to complete. The ADC CAPT register reads '1'
|
|
* if conversion is completed. Reads '0' if conversion is in progress.
|
|
* Try three times before giving up.
|
|
*/
|
|
|
|
for (i = 0; i < 3; i++)
|
|
{
|
|
/* The worst case ADC conversion time is (nominally) 56.4 uS. The
|
|
* following usleep() looks nice but in reality, the usleep()
|
|
* does not have that kind of precision (it will probably end up
|
|
* waiting 10 MS).
|
|
*/
|
|
|
|
usleep(57);
|
|
|
|
/* Check if the conversion is complete */
|
|
|
|
regval = stmpe11_getreg8(priv, STMPE11_ADC_CAPT);
|
|
if ((regval & pinmask) != 0)
|
|
{
|
|
break;
|
|
}
|
|
}
|
|
|
|
/* At the completion of the conversion, return whatever we read from
|
|
* from the channel register associated with the pin.
|
|
*/
|
|
|
|
return stmpe11_getreg16(priv, STMPE11_ADC_DATACH(pin));
|
|
}
|
|
|
|
#endif /* CONFIG_INPUT && CONFIG_INPUT_STMPE11 && !CONFIG_STMPE11_ADC_DISABLE */
|
|
|