nuttx

History

Gregory Nutt 276cc44878 SAMA5 HSMCI: e-enable TX DMA and verify that DMA writes to the SD card are functional. They are so now TX DMA is re-enabled in the driver. This might affect the SAMA5D3 platforms where the TX DMA problem was found. The SAMA4D3 and 4 use the same HSMCI driver. Much has change since then and it is not surprising that DMA is now functional. However, the has not be re-verified on the SAMA5D3 which has a different DMA controller.

2014-07-30 11:20:06 -06:00

a1x

Add serial method so that lower half driver can provide RX flow control information. From Jussi Kivilinna

2014-05-08 09:00:33 -06:00

arm

More trailing whilespace removal

2014-04-13 16:22:22 -06:00

armv6-m

Change all variadic macros to C99 style

2014-05-22 09:01:51 -06:00

armv7-a

ARM: Move L2 cache initialization to much later in the sequence

2014-07-27 10:03:33 -06:00

armv7-m

3rd time is a charm. Max is right, the initial priority setting should be NVIC_SYSH_PRIORITY_MIN

2014-07-24 16:51:07 -06:00

c5471

NET: emoved all includes of uip.h; added includes of ip.h wherever needed. Tried to fix problems of the now missing sneak inclusions because uip.h was removed. There are probably a few of these that were missed.

2014-07-04 19:13:08 -06:00

calypso

Add serial method so that lower half driver can provide RX flow control information. From Jussi Kivilinna

2014-05-08 09:00:33 -06:00

common

ARM: Move L2 cache initialization to much later in the sequence

2014-07-27 10:03:33 -06:00

dm320

Add serial method so that lower half driver can provide RX flow control information. From Jussi Kivilinna

2014-05-08 09:00:33 -06:00

imx

Add serial method so that lower half driver can provide RX flow control information. From Jussi Kivilinna

2014-05-08 09:00:33 -06:00

kinetis

2014-07-04 19:13:08 -06:00

Make sure that all references to up_prioritize_irq() are conditioned on CONFIG_ARCH_IRQPRIO. Noted by Make Smith

2014-05-20 17:48:39 -06:00

lpc17xx

LPC17xx: DC updates from Max. Also fixes some syntax errors that I introduced in the last commit.

2014-07-28 07:23:49 -06:00

lpc31xx

Add serial method so that lower half driver can provide RX flow control information. From Jussi Kivilinna

2014-05-08 09:00:33 -06:00

lpc43xx

Add serial method so that lower half driver can provide RX flow control information. From Jussi Kivilinna

2014-05-08 09:00:33 -06:00

lpc214x

Add serial method so that lower half driver can provide RX flow control information. From Jussi Kivilinna

2014-05-08 09:00:33 -06:00

lpc2378

LPC23xx: Several fixes for typos from Lizhuoyi

2014-06-06 11:06:19 -06:00

nuc1xx

Add serial method so that lower half driver can provide RX flow control information. From Jussi Kivilinna

2014-05-08 09:00:33 -06:00

sam34

SAM3/4: Fix compile of sam_aes.c if CONFIG_CRYPTO_AES is defined. rom Max Nekludov

2014-07-07 08:03:18 -06:00

sama5

SAMA5 HSMCI: e-enable TX DMA and verify that DMA writes to the SD card are functional. They are so now TX DMA is re-enabled in the driver. This might affect the SAMA5D3 platforms where the TX DMA problem was found. The SAMA4D3 and 4 use the same HSMCI driver. Much has change since then and it is not surprising that DMA is now functional. However, the has not be re-verified on the SAMA5D3 which has a different DMA controller.

2014-07-30 11:20:06 -06:00

samd

Make sure that all references to up_prioritize_irq() are conditioned on CONFIG_ARCH_IRQPRIO. Noted by Make Smith

2014-05-20 17:48:39 -06:00

stm32

Update ChangeLog

2014-07-22 07:25:01 -06:00

str71x

Make sure that all references to up_prioritize_irq() are conditioned on CONFIG_ARCH_IRQPRIO. Noted by Make Smith

2014-05-20 17:48:39 -06:00

tiva

NET: Standardize naming of all protocal header lengths

2014-07-05 13:04:48 -06:00

.gitignore

…

Makefile

arch/arm/src/Makefile: dependency directory list is now computed from the VPATH. From Richard Cochran

2014-01-23 07:41:00 -06:00