nuttx/drivers/wireless/spirit/include/spirit_irq.h
Alin Jerpelea e1d361eddf drivers: nxstyle fixes
Fixes for errors reported by nxstyle

Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
2021-04-05 07:31:45 -05:00

460 lines
20 KiB
C

/******************************************************************************
* drivers/wireless/spirit/include/spirit_irq.h
* Configuration and management of SPIRIT IRQs.
*
* Copyright(c) 2015 STMicroelectronics
* Author: VMA division - AMS
* Version 3.2.2 08-July-2015
*
* Adapted for NuttX by:
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are
* met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its
* contributors may be used to endorse or promote products derived from
* this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
* CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
* EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
* PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
* OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
* WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
* OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
* ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************/
#ifndef __DRIVERS_WIRELESS_SPIRIT_INCLUDE_SPIRIT_IRQ_H
#define __DRIVERS_WIRELESS_SPIRIT_INCLUDE_SPIRIT_IRQ_H
/* On the Spirit side specific IRQs can be enabled by setting a specific
* bitmask.
* The Spirit libraries allow the user to do this in two different ways:
*
* The first enables the IRQs one by one, i.e. using an SPI transaction for
* each IRQ to enable.
*
* Example:
*
* spirit_irq_disableall(spirit); # this call is used to reset the IRQ mask
* registers
* spirit_irq_enable(spirit, RX_DATA_READY , S_ENABLE);
* spirit_irq_enable(spirit, VALID_SYNC , S_ENABLE);
* spirit_irq_enable(spirit, RX_TIMEOUT , S_ENABLE);
*
* The most applications will require a Spirit IRQ notification on an
* microcontroller EXTI line. Then, the user can check which IRQ has been
* raised using two different ways.
*
* On the ISR of the EXTI line phisically linked to the Spirit pin
* configured for IRQ:
*
* Check only one Spirit IRQ (because the Spirit IRQ status register
* automatically blanks itself after an SPI reading) into the ISR.
*
* Example:
*
* if (spirit_irq_is_pending(RX_DATA_READY))
* {
* # do something...
* }
*
* Check more than one Spirit IRQ status by storing the entire IRQ status
* registers into a bitfields struct spirit_irqset_s structure and then
* check the interesting bits.
*
* Example:
*
* spirit_irq_get_pending(&irqStatus);
*
* if (irqStatus.IRQ_RX_DATA_READY)
* {
* # do something...
* }
*
* if (irqStatus.IRQ_VALID_SYNC)
* {
* # do something...
* }
*
* if (irqStatus.RX_TIMEOUT)
* {
* # do something...
* }
*/
/******************************************************************************
* Included Files
******************************************************************************/
#include "spirit_types.h"
#include "spirit_regs.h"
/******************************************************************************
* Pre-processor Definitions
******************************************************************************/
/* uint32_t masks */
#define IRQ_TX_FIFO_ALMOST_EMPTY_MASK (0x00010000) /* (1 << 16) */
#define IRQ_RX_FIFO_ALMOST_FULL_MASK (0x00020000) /* (1 << 17) */
#define IRQ_VALID_SYNC_MASK (0x00200000) /* (1 << 21) */
#define IRQ_RX_DATA_READY_MASK (0x01000000) /* (1 << 24) */
#define IRQ_RX_DATA_DISC_MASK (0x02000000) /* (1 << 25) */
#define IRQ_TX_DATA_SENT_MASK (0x04000000) /* (1 << 26) */
#define IRQ_TX_FIFO_ERROR_MASK (0x20000000) /* (1 << 29) */
#define IRQ_RX_FIFO_ERROR_MASK (0x40000000) /* (1 << 30) */
/* Macros used in assertions */
#define IS_SPIRIT_IRQ_LIST(value) \
((value == RX_DATA_READY) || (value == RX_DATA_DISC) || \
(value == TX_DATA_SENT) || (value == MAX_RE_TX_REACH) || \
(value == CRC_ERROR) || (value == TX_FIFO_ERROR) || \
(value == RX_FIFO_ERROR) || (value == TX_FIFO_ALMOST_FULL) || \
(value == TX_FIFO_ALMOST_EMPTY) || (value == RX_FIFO_ALMOST_FULL) || \
(value == RX_FIFO_ALMOST_EMPTY) || (value == MAX_BO_CCA_REACH) || \
(value == VALID_PREAMBLE) || (value == VALID_SYNC) || \
(value == RSSI_ABOVE_TH) || (value == WKUP_TOUT_LDC) || \
(value == READY) || (value == STANDBY_DELAYED) || \
(value == LOW_BATT_LVL) || (value == POR) || \
(value == BOR) || (value == LOCK) || \
(value == PM_COUNT_EXPIRED) || (value == XO_COUNT_EXPIRED) || \
(value == SYNTH_LOCK_TIMEOUT) || (value == SYNTH_LOCK_STARTUP) || \
(value == SYNTH_CAL_TIMEOUT) || (value == TX_START_TIME) || \
(value == RX_START_TIME) || (value == RX_TIMEOUT) || \
(value == AES_END) || (value == ALL_IRQ ))
/******************************************************************************
* Public Types
******************************************************************************/
#ifdef __cplusplus
extern "C"
{
#endif
/* IRQ bitfield structure for SPIRIT. This structure is used to read or write
* the single IRQ bit. During the initialization the user has to fill this
* structure setting to one the single field related to the IRQ he wants to
* enable, and to zero the single field related to all the IRQs he wants to
* disable.
*
* The same structure can be used to retrieve all the IRQ events from the IRQ
* registers IRQ_STATUS[3:0], and read if one or more specific IRQ raised.
*
* NOTE: The fields order in the structure depends on used endianness (little
* or big endian). The actual definition is valid ONLY for LITTLE ENDIAN
* mode. Be sure to change the field order when use a different endianness.
*/
#ifndef CONFIG_ENDIAN_BIG
struct spirit_irqset_s
{
uint8_t IRQ_SYNTH_LOCK_TIMEOUT : 1; /* IRQ: only for debug; LOCK state
* timeout */
uint8_t IRQ_SYNTH_LOCK_STARTUP : 1; /* IRQ: only for debug; see
* CALIBR_START_COUNTER */
uint8_t IRQ_SYNTH_CAL_TIMEOUT : 1; /* IRQ: only for debug; SYNTH
* calibration timeout */
uint8_t IRQ_TX_START_TIME : 1; /* IRQ: only for debug; TX
* circuitry startup time; see
* TX_START_COUNTER */
uint8_t IRQ_RX_START_TIME : 1; /* IRQ: only for debug; RX
* circuitry startup time; see
* TX_START_COUNTER */
uint8_t IRQ_RX_TIMEOUT : 1; /* IRQ: RX operation timeout */
uint8_t IRQ_AES_END : 1; /* IRQ: AES End of operation */
uint8_t reserved : 1; /* Reserved bit */
uint8_t IRQ_READY : 1; /* IRQ: READY state */
uint8_t IRQ_STANDBY_DELAYED : 1; /* IRQ: STANDBY state after
* MCU_CK_CONF_CLOCK_TAIL_X
* clock cycles */
uint8_t IRQ_LOW_BATT_LVL : 1; /* IRQ: Battery level below
* threshold */
uint8_t IRQ_POR : 1; /* IRQ: Power On Reset */
uint8_t IRQ_BOR : 1; /* IRQ: Brown out event (both
* accurate and inaccurate) */
uint8_t IRQ_LOCK : 1; /* IRQ: LOCK state */
uint8_t IRQ_PM_COUNT_EXPIRED : 1; /* IRQ: only for debug;
* Power Management startup
* timer expiration (see reg
* PM_START_COUNTER, 0xB5) */
uint8_t IRQ_XO_COUNT_EXPIRED : 1; /* IRQ: only for debug;
* Crystal oscillator settling
* time counter expired */
uint8_t IRQ_TX_FIFO_ALMOST_EMPTY : 1; /* IRQ: TX FIFO almost empty */
uint8_t IRQ_RX_FIFO_ALMOST_FULL : 1; /* IRQ: RX FIFO almost full */
uint8_t IRQ_RX_FIFO_ALMOST_EMPTY : 1; /* IRQ: RX FIFO almost empty */
uint8_t IRQ_MAX_BO_CCA_REACH : 1; /* IRQ: Max number of back-off
* during CCA */
uint8_t IRQ_VALID_PREAMBLE : 1; /* IRQ: Valid preamble detected */
uint8_t IRQ_VALID_SYNC : 1; /* IRQ: Sync word detected */
uint8_t IRQ_RSSI_ABOVE_TH : 1; /* IRQ: RSSI above threshold */
uint8_t IRQ_WKUP_TOUT_LDC : 1; /* IRQ: Wake-up timeout in LDC mode */
uint8_t IRQ_RX_DATA_READY : 1; /* IRQ: RX data ready */
uint8_t IRQ_RX_DATA_DISC : 1; /* IRQ: RX data discarded
* (upon filtering) */
uint8_t IRQ_TX_DATA_SENT : 1; /* IRQ: TX data sent */
uint8_t IRQ_MAX_RE_TX_REACH : 1; /* IRQ: Max re-TX reached */
uint8_t IRQ_CRC_ERROR : 1; /* IRQ: CRC error */
uint8_t IRQ_TX_FIFO_ERROR : 1; /* IRQ: TX FIFO underflow/overflow
* error */
uint8_t IRQ_RX_FIFO_ERROR : 1; /* IRQ: RX FIFO underflow/overflow
* error */
uint8_t IRQ_TX_FIFO_ALMOST_FULL : 1; /* IRQ: TX FIFO almost full */
};
#endif
/* IRQ list enumeration for SPIRIT. This enumeration type can be used to
* address a specific IRQ.
*/
enum spirit_irq_e
{
RX_DATA_READY = 0x00000001, /* IRQ: RX data ready */
RX_DATA_DISC = 0x00000002, /* IRQ: RX data discarded (upon
* filtering) */
TX_DATA_SENT = 0x00000004, /* IRQ: TX data sent */
MAX_RE_TX_REACH = 0x00000008, /* IRQ: Max re-TX reached */
CRC_ERROR = 0x00000010, /* IRQ: CRC error */
TX_FIFO_ERROR = 0x00000020, /* IRQ: TX FIFO underflow/overflow
* error */
RX_FIFO_ERROR = 0x00000040, /* IRQ: RX FIFO underflow/overflow
* error */
TX_FIFO_ALMOST_FULL = 0x00000080, /* IRQ: TX FIFO almost full */
TX_FIFO_ALMOST_EMPTY = 0x00000100, /* IRQ: TX FIFO almost empty */
RX_FIFO_ALMOST_FULL = 0x00000200, /* IRQ: RX FIFO almost full */
RX_FIFO_ALMOST_EMPTY = 0x00000400, /* IRQ: RX FIFO almost empty */
MAX_BO_CCA_REACH = 0x00000800, /* IRQ: Max number of back-off
* during CCA */
VALID_PREAMBLE = 0x00001000, /* IRQ: Valid preamble detected */
VALID_SYNC = 0x00002000, /* IRQ: Sync word detected */
RSSI_ABOVE_TH = 0x00004000, /* IRQ: RSSI above threshold */
WKUP_TOUT_LDC = 0x00008000, /* IRQ: Wake-up timeout in LDC mode */
READY = 0x00010000, /* IRQ: READY state */
STANDBY_DELAYED = 0x00020000, /* IRQ: STANDBY state after
* MCU_CK_CONF_CLOCK_TAIL_X clock
* cycles */
LOW_BATT_LVL = 0x00040000, /* IRQ: Battery level below
* threshold */
POR = 0x00080000, /* IRQ: Power On Reset */
BOR = 0x00100000, /* IRQ: Brown out event (both accurate and
* inaccurate) */
LOCK = 0x00200000, /* IRQ: LOCK state */
PM_COUNT_EXPIRED = 0x00400000, /* IRQ: only for debug; Power
* Management startup timer expiration
* (see reg PM_START_COUNTER, 0xB5) */
XO_COUNT_EXPIRED = 0x00800000, /* IRQ: only for debug; Crystal
* oscillator settling time counter
* expired */
SYNTH_LOCK_TIMEOUT = 0x01000000, /* IRQ: only for debug; LOCK state
* timeout */
SYNTH_LOCK_STARTUP = 0x02000000, /* IRQ: only for debug; see
* CALIBR_START_COUNTER */
SYNTH_CAL_TIMEOUT = 0x04000000, /* IRQ: only for debug; SYNTH
* calibration timeout */
TX_START_TIME = 0x08000000, /* IRQ: only for debug; TX circuitry
* startup time; see TX_START_COUNTER */
RX_START_TIME = 0x10000000, /* IRQ: only for debug; RX circuitry
* startup time; see TX_START_COUNTER */
RX_TIMEOUT = 0x20000000, /* IRQ: RX operation timeout */
AES_END = 0x40000000, /* IRQ: AES End of operation */
ALL_IRQ = 0x7fffffff /* All the above mentioned IRQs */
};
/******************************************************************************
* Public Function Prototypes
******************************************************************************/
/******************************************************************************
* Name: spirit_irq_disable_all
*
* Description:
* Ssets the IRQ mask registers to 0x00000000, disabling all IRQs.
*
* Input Parameters:
* spirit - Reference to a Spirit library state structure instance
*
* Returned Value:
* Zero (OK) on success; a negated errno value on failure.
*
******************************************************************************/
int spirit_irq_disable_all(FAR struct spirit_library_s *spirit);
/******************************************************************************
* Name: spirit_irq_set_mask
*
* Description:
* Enables/disables all the IRQs according to the user defined irqset
* structure.
*
* Input Parameters:
* spirit - Reference to a Spirit library state structure instance
* irqset - Pointer to a variable of type struct spirit_irqset_s, through
* which the user enable specific IRQs. This parameter is a
* pointer to a struct spirit_irqset_s.
*
* For example suppose to enable only the two IRQ Low Battery Level
* and Tx Data Sent:
*
* struct spirit_irqset_s g_irqset = {0};
* g_irqset.IRQ_LOW_BATT_LVL = 1;
* g_irqset.IRQ_TX_DATA_SENT = 1;
* spirit_irq_setmask(&g_irqset);
*
* Returned Value:
* Zero (OK) on success; a negated errno value on failure.
*
******************************************************************************/
#ifndef CONFIG_ENDIAN_BIG
int spirit_irq_set_mask(FAR struct spirit_library_s *spirit,
FAR struct spirit_irqset_s *irqset);
#endif
/******************************************************************************
* Name: spirit_irq_enable
*
* Description:
* Enables or disables a specific IRQ.
*
* Input Parameters:
* spirit - Reference to a Spirit library state structure instance
* irq IRQ to enable or disable.
* newstate - new state for the IRQ.
*
* Returned Value:
* Zero (OK) on success; a negated errno value on failure.
*
******************************************************************************/
int spirit_irq_enable(FAR struct spirit_library_s *spirit,
enum spirit_irq_e irq,
enum spirit_functional_state_e newstate);
/******************************************************************************
* Name: spirit_irt_get_mask
*
* Description:
* Fills a pointer to a structure of struct spirit_irqset_s type with the
* content of the IRQ_MASK registers.
*
* Input Parameters:
* spirit - Reference to a Spirit library state structure instance
* pirqmask - Pointer to a variable of type struct spirit_irqset_s, through
* which the user can read which IRQs are enabled. All the
* bitfields equals to zero correspond to enabled IRQs, while
* all the bitfields equals to one correspond to disabled IRQs.
*
* For example suppose that the Power On Reset and RX Data
* ready are the only enabled IRQs.
*
* struct spirit_irqset_s g_irqmask;
* spirit_irq_get_pending(&g_irqmask);
*
* Then g_irqmask.IRQ_POR and g_irqmask.IRQ_RX_DATA_READY are
* equal to 0 while all the other bitfields are equal to one.
*
* Returned Value:
* Zero (OK) on success; a negated errno value on failure.
*
******************************************************************************/
#ifndef CONFIG_ENDIAN_BIG
int spirit_irt_get_mask(FAR struct spirit_library_s *spirit,
FAR struct spirit_irqset_s *pirqmask);
#endif
/******************************************************************************
* Name: spirit_irq_get_pending
*
* Description:
* Fills a pointer to a structure of struct spirit_irqset_s type with the
* content of the IRQ_STATUS registers.
*
* Input Parameters:
* spirit - Reference to a Spirit library state structure instance
* pirqstatus - A pointer to a variable of type struct spirit_irqset_s,
* through which the user can receive the status of all the
* IRQs. All the bitfields equals to one correspond to the
* raised interrupts.
*
* For example suppose that the XO settling timeout is raised
* as well as the Sync word detection.
*
* struct spirit_irqset_s g_irqstatus;
* spirit_irq_get_pending(&g_irqstatus);
*
* Then g_irqstatus.IRQ_XO_COUNT_EXPIRED and
* g_irqstatus.IRQ_VALID_SYNC are equals to 1* while all the
* other bitfields are equals to zero.
*
* Returned Value:
* Zero (OK) on success; a negated errno value on failure.
*
******************************************************************************/
#ifndef CONFIG_ENDIAN_BIG
int spirit_irq_get_pending(FAR struct spirit_library_s *spirit,
FAR struct spirit_irqset_s *pirqstatus);
#endif
/******************************************************************************
* Name: spirit_irq_clr_pending
*
* Description:
* Clear all IRQ status registers.
*
* Input Parameters:
* spirit - Reference to a Spirit library state structure instance
*
* Returned Value:
* Zero (OK) on success; a negated errno value on failure.
*
******************************************************************************/
int spirit_irq_clr_pending(FAR struct spirit_library_s *spirit);
/******************************************************************************
* Name: spirit_irq_is_pending
*
* Description:
* Checks if a specific IRQ has been generated. The call resets all the
* IRQ status, so it can't be used in case of multiple raising interrupts.
*
* Input Parameters:
* spirit - Reference to a Spirit library state structure instance
* flag IRQ flag to be checked.
* This parameter can be any value of enum spirit_irq_e.
*
* Returned Value:
* true or false.
*
******************************************************************************/
bool spirit_irq_is_pending(FAR struct spirit_library_s *spirit,
enum spirit_irq_e flag);
#ifdef __cplusplus
}
#endif
#endif /* __DRIVERS_WIRELESS_SPIRIT_INCLUDE_SPIRIT_IRQ_H */