nuttx/include/nuttx
2015-02-04 14:51:20 -06:00
..
analog More trailing whilespace removal 2014-04-13 14:32:20 -06:00
audio Rename kumalloc to kumm_malloc and kuzalloc to kumm_zalloc for consistency with other naming 2014-08-31 16:24:24 -06:00
binfmt Oops.. part of the last change will still in the editor 2014-11-12 18:33:07 -06:00
crypto STM32: Add driver for STM32L162XX AES peripheral. Signed-off-by: Juha Niskanen <juha.niskanen@haltian.com> 2015-02-04 06:49:05 -06:00
eeprom Add support for ST Micro EEPROM device geometries. From Sebastien Lorquet 2014-12-05 09:13:34 -06:00
fs drivers/ramdisk.c and include/nuttx/fs/ramdisk.h: Add logic to dispose of the drvier and RAM buffer when the RAM disk has been unlinked and all open references to the RAM disk have been closed. Add new parameters to romdisk() to specify what should be done with the RAM/ROM buffer -- Should it be freed or not? Changed all calls to ramdisk() to use these new parameters. 2015-02-01 07:24:16 -06:00
input Update the ADXL345 interface following the current interface scheme 2014-12-16 11:45:28 -06:00
lcd Remove execute privileges from some header files 2015-02-01 06:24:18 -06:00
mm MM: Minimum memory allocation must to up to 32 if sizeof pointer is 8-bytes 2014-11-02 12:11:20 -06:00
mtd Added forward reference to eliminate warnings. From David Sidrane. 2014-12-30 06:20:40 -06:00
net Networking: Break out Ethernet definitions into a separate file; add IPv6 multicast addresses as common globals, Ethernet drivers need to filter link-local, all nodes Ethernet address 2015-02-04 14:51:20 -06:00
nx Lots of fonts that derive from X11-misc-fixed-* fonts. Converted for use by NuttX by Pierre-Noel Bouteville 2014-12-10 17:11:23 -06:00
power LM: Don't initialize .data if running in SRAM. Global missing intialize type. SAMA5 NAND: Fix for read nand in smaller chunks 2013-12-05 10:37:55 -06:00
sensors Update ChangeLog 2015-01-06 10:52:05 -06:00
sercomm Move include/sercomm to include/nuttx/sercomm 2012-03-24 18:33:21 +00:00
serial STM32 Serial: PX4 HW workarround for flaky STM32 RTS. From David Sidrane 2014-12-27 18:58:18 -06:00
spi Remove execute privileges from some header files 2015-02-01 06:24:18 -06:00
syslog ARMv7: Add support to use ITM for SYSLOG debug output 2014-10-22 09:03:00 -06:00
usb Remove execute privileges from some header files 2015-02-01 06:24:18 -06:00
video STM32 LTDC: Move ltdc.h from include/nuttx/video to arch/arm/include/stm32; Trivial updates after general review 2014-12-19 14:52:17 -06:00
wireless Freedom KL25Z: Update the CC3000 support to use the current CC300 interfaces. From Alan Carvalho de Assis 2014-12-18 13:52:01 -06:00
.gitignore Mostly updates and corrections to .gitignore files 2013-04-04 15:39:50 -06:00
addrenv.h Move include/nuttx/mm.h to include/nuttx/mm/mm.h 2014-09-24 07:29:09 -06:00
arch.h Convert the 64-bit usec limit to a 32-bit tick limit 2015-02-03 07:18:17 -06:00
ascii.h Add basic data structures that will allow us to move named semaphore support out of the OS and into the VFS (not complete). 2014-09-28 10:15:33 -06:00
can.h More trailing whilespace removal 2014-04-13 14:32:20 -06:00
clock.h last change alters semantics of __HAVE_KERNEL_GLOBALS 2014-08-30 14:44:48 -06:00
compiler.h Defines inline functions as not instrumented - this is relevant for anyone using instrumentation. From Lorenz Meier. 2014-11-12 07:32:36 -06:00
configdata.h Add basic data structures that will allow us to move named semaphore support out of the OS and into the VFS (not complete). 2014-09-28 10:15:33 -06:00
float.h lib/math files not follow coding standard; float, double, and long double versions in separate files to reduce size of dumb link 2012-10-28 18:42:09 +00:00
i2c.h maXTouch: Check for successful memory allocation was backward 2014-07-07 09:55:39 -06:00
init.h Add basic data structures that will allow us to move named semaphore support out of the OS and into the VFS (not complete). 2014-09-28 10:15:33 -06:00
irq.h Add basic data structures that will allow us to move named semaphore support out of the OS and into the VFS (not complete). 2014-09-28 10:15:33 -06:00
kmalloc.h Move include/nuttx/mm.h to include/nuttx/mm/mm.h 2014-09-24 07:29:09 -06:00
kthread.h Add basic data structures that will allow us to move named semaphore support out of the OS and into the VFS (not complete). 2014-09-28 10:15:33 -06:00
lib.h Add basic data structures that will allow us to move named semaphore support out of the OS and into the VFS (not complete). 2014-09-28 10:15:33 -06:00
math.h Add math library defines for nan functions. From Brennan Ashton. 2015-01-26 19:03:38 -06:00
mmcsd.h Add basic data structures that will allow us to move named semaphore support out of the OS and into the VFS (not complete). 2014-09-28 10:15:33 -06:00
mqueue.h Repartition some message queue logic: sched/mqueue should have all mqueue knowledge; fs/mqueue should deal only with inodes 2014-09-30 08:03:39 -06:00
page.h Add basic data structures that will allow us to move named semaphore support out of the OS and into the VFS (not complete). 2014-09-28 10:15:33 -06:00
pgalloc.h Add basic data structures that will allow us to move named semaphore support out of the OS and into the VFS (not complete). 2014-09-28 10:15:33 -06:00
poff.h Fix some cloned errors in SAM GPIO interrupt setup 2014-07-07 15:54:37 -06:00
progmem.h STM32 FLASH fixes: use size_t instead of uint16_t, make interface more generic. From Freddie Chopin 2014-08-28 09:11:20 -06:00
pthread.h Add basic data structures that will allow us to move named semaphore support out of the OS and into the VFS (not complete). 2014-09-28 10:15:33 -06:00
pwm.h Add basic data structures that will allow us to move named semaphore support out of the OS and into the VFS (not complete). 2014-09-28 10:15:33 -06:00
regex.h Add basic data structures that will allow us to move named semaphore support out of the OS and into the VFS (not complete). 2014-09-28 10:15:33 -06:00
rtc.h More trailing whilespace removal 2014-04-13 14:32:20 -06:00
rwbuffer.h Remove execute privileges from some header files 2015-02-01 06:24:18 -06:00
sched.h strncpy will not copy the terminating \0 into the destination if the source is larger than the size of the destination. Ensure that the last byte is always zero and let strncpy only copy CONFIG_TASK_NAME_SIZE bytes. The issue of unterminated names can be observed in ps when creating a pthread while CONFIG_TASK_NAME_SIZE is set to 8. 2014-12-17 12:24:02 -06:00
scsi.h Add basic data structures that will allow us to move named semaphore support out of the OS and into the VFS (not complete). 2014-09-28 10:15:33 -06:00
sdio.h Remove execute privileges from some header files 2015-02-01 06:24:18 -06:00
semaphore.h Complete re-implementation of mq_close 2014-09-29 15:33:34 -06:00
spawn.h Add internal API task_reparent(), used in posix_spawn(). Move libc/spawn/lib_ps.c to sched/task_posixspawn.c; Move libc/spawn/spawn.h to include/nuttx/spawn.h 2013-01-18 01:52:42 +00:00
stdarg.h Add a generic GCC stdarg.h header file 2012-07-08 14:50:43 +00:00
streams.h Implement setlogmask(); move some syslog logic from libc/syslog to fs/syslog 2014-10-08 19:08:26 -06:00
time.h Add basic data structures that will allow us to move named semaphore support out of the OS and into the VFS (not complete). 2014-09-28 10:15:33 -06:00
timer.h Timer driver updates from Bob Doiron 2014-05-05 14:40:19 -06:00
tree.h Fix error in tree.h 2014-06-02 13:44:44 -06:00
userspace.h Rename CONFIG_SCHED_USRWORK to CONFIG_LIB_USRWORK 2014-10-11 15:59:40 -06:00
vt100.h Add ANSI/VT100 color codes 2014-11-10 15:10:57 -06:00
watchdog.h SAMA5 T/C: Can now handle non-constant BOARD_MCK_FREQUENCY. Also now supports methods to attach user interrupt handlers 2014-08-09 10:30:45 -06:00
wdog.h Add support for statically allocated watchdog timer structures 2014-08-22 08:46:34 -06:00
wqueue.h Fix warning caused by missing comment closing */. From David Sidrane. 2014-12-30 06:22:18 -06:00