sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
293484ffed
nuttx/configs/samd20-xplained/include/board.h

321 lines
12 KiB
C
Raw Blame History

/************************************************************************************
* configs/samd20-xplained/include/board.h
*
* Copyright (C) 2014 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
************************************************************************************/
#ifndef __CONFIGS_SAMD20_XPLAINED_INCLUDE_BOARD_H
#define __CONFIGS_SAMD20_XPLAINED_INCLUDE_BOARD_H
/************************************************************************************
* Included Files
************************************************************************************/
#include <nuttx/config.h>
#ifndef __ASSEMBLY__
# include <stdint.h>
# ifdef CONFIG_GPIO_IRQ
# include <arch/irq.h>
# endif
#endif
/************************************************************************************
* Definitions
************************************************************************************/
/* Clocking *************************************************************************/
/* Nominal frequencies of on-chip RC oscillators. These are *not* configurable
* but appear here for use in frequency calculations. NOTE: These frequencies
* may vary with temperature changes.
*/
#define BOARD_OSCULP32K_FREQUENCY 32000 /* 32kHz ultra-low-power internal oscillator */
#define BOARD_OSC8M_FREQUENCY 8000000 /* 8MHz high-accuracy internal oscillator */
#define BOARD_DFLL48M_FREQUENCY 48000000 /* 48MHz Digital Frequency Locked Loop */
/* The SAMD20 Xplained Pro has one on-board crystal:
*
* XC101 32.768KHz XOSC32
*/
/* XOSC Configuration -- Not available
*
* BOARD_XOSC_ENABLE - Boolean (defined / not defined)
* BOARD_XOSC_FREQUENCY - In Hz
* BOARD_XOSC_STARTUPTIME - See SYSCTRL_XOSC_STARTUP_* definitions
* BOARD_XOSC_ISCRYSTAL - Boolean (defined / not defined)
* BOARD_XOSC_AMPGC - Boolean (defined / not defined)
* BOARD_XOSC_ONDEMAND - Boolean (defined / not defined)
* BOARD_XOSC_RUNINSTANDBY - Boolean (defined / not defined)
*/
#undef BOARD_XOSC_ENABLE
#define BOARD_XOSC_FREQUENCY 12000000UL
#define BOARD_XOSC_STARTUPTIME SYSCTRL_XOSC_STARTUP_1S
#define BOARD_XOSC_ISCRYSTAL 1
#define BOARD_XOSC_AMPGC 1
#define BOARD_XOSC_ONDEMAND 1
#undef BOARD_XOSC_RUNINSTANDBY
/* XOSC32 Configuration -- Not used
*
* BOARD_XOSC32K_ENABLE - Boolean (defined / not defined)
* BOARD_XOSC32K_FREQUENCY - In Hz
* BOARD_XOSC32K_STARTUPTIME - See SYSCTRL_XOSC32K_STARTUP_* definitions
* BOARD_XOSC32K_ISCRYSTAL - Boolean (defined / not defined)
* BOARD_XOSC32K_AAMPEN - Boolean (defined / not defined)
* BOARD_XOSC32K_EN1KHZ - Boolean (defined / not defined)
* BOARD_XOSC32K_EN32KHZ - Boolean (defined / not defined)
* BOARD_XOSC32K_ONDEMAND - Boolean (defined / not defined)
* BOARD_XOSC32K_RUNINSTANDBY - Boolean (defined / not defined)
*/
#undef BOARD_XOSC32K_ENABLE
#define BOARD_XOSC32K_FREQUENCY 32768 /* 32.768KHz XTAL */
#define BOARD_XOSC32K_STARTUPTIME SYSCTRL_XOSC32K_STARTUP_2S
#define BOARD_XOSC32K_ISCRYSTAL 1
#define BOARD_XOSC32K_AAMPEN 1
#undef BOARD_XOSC32K_EN1KHZ
#define BOARD_XOSC32K_EN32KHZ 1
#define BOARD_XOSC32K_ONDEMAND 1
#undef BOARD_XOSC32K_RUNINSTANDBY
/* OSC32 Configuration -- not used
*
* BOARD_OSC32K_ENABLE - Boolean (defined / not defined)
* BOARD_OSC32K_FREQUENCY - In Hz
* BOARD_OSC32K_STARTUPTIME - See SYSCTRL_OSC32K_STARTUP_* definitions
* BOARD_OSC32K_EN1KHZ - Boolean (defined / not defined)
* BOARD_OSC32K_EN32KHZ - Boolean (defined / not defined)
* BOARD_OSC32K_ONDEMAND - Boolean (defined / not defined)
* BOARD_OSC32K_RUNINSTANDBY - Boolean (defined / not defined)
*/
#undef BOARD_OSC32K_ENABLE
#define BOARD_OSC32K_FREQUENCY 32768 /* 32.768kHz internal oscillator */
#define BOARD_OSC32K_STARTUPTIME SYSCTRL_OSC32K_STARTUP_4MS
#define BOARD_OSC32K_EN1KHZ 1
#define BOARD_OSC32K_EN32KHZ 1
#define BOARD_OSC32K_ONDEMAND 1
#undef BOARD_OSC32K_RUNINSTANDBY
/* OSC8M Configuration -- always enabled
*
* BOARD_OSC8M_PRESCALER - See SYSCTRL_OSC8M_PRESC_DIV* definitions
* BOARD_OSC8M_ONDEMAND - Boolean (defined / not defined)
* BOARD_OSC8M_RUNINSTANDBY - Boolean (defined / not defined)
*/
#define BOARD_OSC8M_PRESCALER SYSCTRL_OSC8M_PRESC_DIV1
#define BOARD_OSC8M_ONDEMAND 1
#undef BOARD_OSC8M_RUNINSTANDBY
/* The source of the main clock is always GLCK_MAIN. Also called GCLKGEN[0], this is
* the clock feeding the Power Manager. The Power Manager, in turn, generates main
* clock which is divided down to produce the CPU, AHB, and APB clocks.
*
* The main clock is initially OSC8M divided by 8. But will be reconfigured here to
* be DFLL48M.
*
* Select the OSC8M as the source of the GLCK_MAIN. Options (define one):
*
* BOARD_GLCK_MAIN_SRC_XOSC - XOSC oscillator output
* BOARD_GLCK_MAIN_SRC_GCLKIN - Generator input pad
* BOARD_GLCK_MAIN_SRC_GCLKGEN1 - Generic clock generator 1 output
* BOARD_GLCK_MAIN_SRC_OSCULP32K - OSCULP32K oscillator output
* BOARD_GLCK_MAIN_SRC_OSC32K - OSC32K oscillator output
* BOARD_GLCK_MAIN_SRC_XOSC32K - XOSC32K oscillator output
* BOARD_GLCK_MAIN_SRC_OSC8M - OSC8M oscillator output
* BOARD_GLCK_MAIN_SRC_DFLL48M - DFLL48M output
*
* Fglckmain = Frefclk / Divider
*/
#define BOARD_GLCK_MAIN_SRC_OSC8M 1
#define BOARD_GLCK_MAIN_DIVIDER 1
#define BOARD_GLCK_MAIN_FREQUENCY (BOARD_OSC8M_FREQUENCY / BOARD_GLCK_MAIN_DIVIDER)
/* Digital Frequency Locked Loop configuration. In closed-loop mode, the
* DFLL output frequency (Fdfll) is given by:
*
* Fdfll = DFLLmul * Frefclk
* = (48000000/32768) * 32768 = 48MHz
*
* Where the reference clock is always the Generic Clock Channel 0 output.
*
* NOTE: Nothing must be defined if the DFPLL is not used
*/
#define BOARD_DFLL48M_TARGET 48000000
#define BOARD_DFLL48M_MUL (BOARD_DFLL0_TARGET / BOARD_GCK_MAIN_FREQUENCY)
#define BOARD_DFLL48M_FREQUENCY (BOARD_DFLL48M_MUL * BOARD_GCK_MAIN_FREQUENCY)
/* Main clock dividers
*
* BOARD_CPU_DIVIDER - See PM_CPUSEL_CPUDIV_* definitions
* BOARD_CPU_FRQUENCY - In Hz
* BOARD_CPU_FAILDECT - Boolean (defined / not defined)
* BOARD_APBA_DIVIDER - See M_APBASEL_APBADIV_* definitions
* BOARD_APBA_FRQUENCY - In Hz
* BOARD_APBB_DIVIDER - See M_APBBSEL_APBBDIV_* definitions
* BOARD_APBB_FRQUENCY - In Hz
* BOARD_APBC_DIVIDER - See M_APBCSEL_APBCDIV_* definitions
* BOARD_APBC_FRQUENCY - In Hz
*/
#define BOARD_CPU_FAILDECT 1
#define BOARD_CPU_DIVIDER PM_CPUSEL_CPUDIV_1
#define BOARD_APBA_DIVIDER PM_APBASEL_APBADIV_1
#define BOARD_APBB_DIVIDER PM_APBBSEL_APBBDIV_1
#define BOARD_APBC_DIVIDER PM_APBCSEL_APBCDIV_1
/* Resulting frequencies */
#define BOARD_MCK_FREQUENCY (BOARD_GLCK_MAIN_FREQUENCY)
#define BOARD_CPU_FREQUENCY (BOARD_MCK_FREQUENCY)
#define BOARD_PBA_FREQUENCY (BOARD_MCK_FREQUENCY)
#define BOARD_PBB_FREQUENCY (BOARD_MCK_FREQUENCY)
#define BOARD_PBC_FREQUENCY (BOARD_MCK_FREQUENCY)
#define BOARD_PBD_FREQUENCY (BOARD_MCK_FREQUENCY)
/* FLASH wait states */
#define BOARD_FLASH_WAITSTATES 0
/* LED definitions ******************************************************************/
/* There are three LEDs on board the SAMD20 Xplained Pro board: The EDBG
* controls two of the LEDs, a power LED and a status LED. There is only
* one user controllable LED, a yellow LED labelled STATUS near the SAMD20 USB
* connector.
*
* This LED is controlled by PC07 and the LED can be activated by driving the
* PA14 to GND.
*/
/* LED index values for use with sam_setled() */
#define BOARD_STATUS_LED 0
#define BOARD_NLEDS 1
/* LED bits for use with sam_setleds() */
#define BOARD_STATUS LED_BIT (1 << BOARD_STATUS_LED)
/* When CONFIG_ARCH_LEDS is defined in the NuttX configuration, NuttX will
* control the LED as defined below. Thus if the LED is statically on, NuttX has
* successfully booted and is, apparently, running normally. If the LED is
* flashing at approximately 2Hz, then a fatal error has been detected and the
* system has halted.
*/
#define LED_STARTED 0 /* STATUS LED=OFF */
#define LED_HEAPALLOCATE 0 /* STATUS LED=OFF */
#define LED_IRQSENABLED 0 /* STATUS LED=OFF */
#define LED_STACKCREATED 1 /* STATUS LED=ON */
#define LED_INIRQ 2 /* STATUS LED=no change */
#define LED_SIGNAL 2 /* STATUS LED=no change */
#define LED_ASSERTION 2 /* STATUS LED=no change */
#define LED_PANIC 3 /* STATUS LED=flashing */
/* Button definitions ***************************************************************/
/* Mechanical buttons:
*
* The SAMD20 Xplained Pro contains two mechanical buttons. One button is the
* RESET button connected to the SAMD20 reset line and the other is a generic user
* configurable button. When a button is pressed it will drive the I/O line to GND.
*
* PA15 SW0
*/
/* The SAMD20 Xplained Pro supports one button: */
#define BUTTON_SW0 0
#define NUM_BUTTONS 1
#define BUTTON_SW0_BIT (1 << BUTTON_SW0)
/************************************************************************************
* Public Data
************************************************************************************/
#ifndef __ASSEMBLY__
#undef EXTERN
#if defined(__cplusplus)
#define EXTERN extern "C"
extern "C"
{
#else
#define EXTERN extern
#endif
/************************************************************************************
* Public Function Prototypes
************************************************************************************/
/************************************************************************************
* Name: sam_boardinitialize
*
* Description:
* All SAM3U architectures must provide the following entry point. This entry point
* is called early in the initialization -- after all memory has been configured
* and mapped but before any devices have been initialized.
*
************************************************************************************/
void sam_boardinitialize(void);
/************************************************************************************
* Name: sam_ledinit, sam_setled, and sam_setleds
*
* Description:
* If CONFIG_ARCH_LEDS is defined, then NuttX will control the on-board LEDs. If
* CONFIG_ARCH_LEDS is not defined, then the following interfaces are available to
* control the LEDs from user applications.
*
************************************************************************************/
#ifndef CONFIG_ARCH_LEDS
void sam_ledinit(void);
void sam_setled(int led, bool ledon);
void sam_setleds(uint8_t ledset);
#endif
#undef EXTERN
#if defined(__cplusplus)
}
#endif
#endif /* __ASSEMBLY__ */
#endif /* __CONFIGS_SAMD20_XPLAINED_INCLUDE_BOARD_H */
Reference in New Issue View Git Blame Copy Permalink