nuttx/arch/x86_64/include/intel64/irq.h
Nathan Hartman 679b4fbee2 arch: Fix included directed -> included directly
This typo had been copied and pasted into numerous irq and syscall
headers.
2020-04-05 22:31:15 +01:00

305 lines
10 KiB
C

/****************************************************************************
* arch/x86_64/include/intel64/irq.h
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership. The
* ASF licenses this file to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance with the
* License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
* License for the specific language governing permissions and limitations
* under the License.
*
****************************************************************************/
/* This file should never be included directly but, rather, only indirectly
* through nuttx/irq.h
*/
#ifndef __ARCH_X86_64_INCLUDE_INTEL64_IRQ_H
#define __ARCH_X86_64_INCLUDE_INTEL64_IRQ_H
/****************************************************************************
* Included Files
****************************************************************************/
#ifndef __ASSEMBLY__
# include <stdint.h>
# include <stdbool.h>
# include <arch/arch.h>
# include <semaphore.h>
# include <time.h>
# include <debug.h>
# include <nuttx/config.h>
#endif
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
/* ISR and IRQ numbers */
#define ISR0 0 /* Division by zero exception */
#define ISR1 1 /* Debug exception */
#define ISR2 2 /* Non maskable interrupt */
#define ISR3 3 /* Breakpoint exception */
#define ISR4 4 /* 'Into detected overflow' */
#define ISR5 5 /* Out of bounds exception */
#define ISR6 6 /* Invalid opcode exception */
#define ISR7 7 /* No coprocessor exception */
#define ISR8 8 /* Double fault (pushes an error code) */
#define ISR9 9 /* Coprocessor segment overrun */
#define ISR10 10 /* Bad TSS (pushes an error code) */
#define ISR11 11 /* Segment not present (pushes an error code) */
#define ISR12 12 /* Stack fault (pushes an error code) */
#define ISR13 13 /* General protection fault (pushes an error code) */
#define ISR14 14 /* Page fault (pushes an error code) */
#define ISR15 15 /* Unknown interrupt exception */
#define ISR16 16 /* Coprocessor fault */
#define ISR17 17 /* Alignment check exception */
#define ISR18 18 /* Machine check exception */
#define ISR19 19 /* SIMD Float-Point Exception*/
#define ISR20 20 /* Virtualization Exception */
#define ISR21 21 /* Reserved */
#define ISR22 22 /* Reserved */
#define ISR23 23 /* Reserved */
#define ISR24 24 /* Reserved */
#define ISR25 25 /* Reserved */
#define ISR26 26 /* Reserved */
#define ISR27 27 /* Reserved */
#define ISR28 28 /* Reserved */
#define ISR29 29 /* Reserved */
#define ISR30 30 /* Security Exception */
#define ISR31 31 /* Reserved */
#define IRQ0 32 /* System timer (cannot be changed) */
#define IRQ1 33 /* Keyboard controller (cannot be changed) */
#define IRQ2 34 /* Cascaded signals from IRQs 8~15 */
#define IRQ3 35 /* Serial port controller for COM2/4 */
#define IRQ4 36 /* serial port controller for COM1/3 */
#define IRQ5 37 /* LPT port 2 or sound card */
#define IRQ6 38 /* Floppy disk controller */
#define IRQ7 39 /* LPT port 1 or sound card */
#define IRQ8 40 /* Real time clock (RTC) */
#define IRQ9 41 /* Open interrupt/available or SCSI host adapter */
#define IRQ10 42 /* Open interrupt/available or SCSI or NIC */
#define IRQ11 43 /* Open interrupt/available or SCSI or NIC */
#define IRQ12 44 /* Mouse on PS/2 connector */
#define IRQ13 45 /* Math coprocessor */
#define IRQ14 46 /* Primary ATA channel */
#define IRQ15 47 /* Secondary ATA channel */
#define IRQ_ERROR 51 /* APIC Error */
#define IRQ_SPURIOUS 0xff /* Spurious Interrupts */
#define NR_IRQS 48
/* Common register save structure created by up_saveusercontext() and by
* ISR/IRQ interrupt processing.
*/
#define XCPTCONTEXT_XMM_AREA_SIZE 512
#define XMMAREA_OFFSET XCPTCONTEXT_XMM_AREA_SIZE / 8
/* Data segments */
#define REG_ALIGN (0 + XMMAREA_OFFSET) /* " " "" " " "" " " " " */
#define REG_FS (1 + XMMAREA_OFFSET) /* " " "" " " "" " " " " */
#define REG_GS (2 + XMMAREA_OFFSET) /* " " "" " " "" " " " " */
#define REG_ES (3 + XMMAREA_OFFSET) /* " " "" " " "" " " " " */
#define REG_DS (4 + XMMAREA_OFFSET) /* Data segment selector */
/* Remaining regs */
#define REG_RAX (5 + XMMAREA_OFFSET) /* " " "" " " */
#define REG_RBX (6 + XMMAREA_OFFSET) /* " " "" " " */
#define REG_RBP (7 + XMMAREA_OFFSET) /* " " "" " " */
#define REG_R10 (8 + XMMAREA_OFFSET) /* " " "" " " */
#define REG_R11 (9 + XMMAREA_OFFSET) /* " " "" " " */
#define REG_R12 (10 + XMMAREA_OFFSET) /* " " "" " " */
#define REG_R13 (11 + XMMAREA_OFFSET) /* " " "" " " */
#define REG_R14 (12 + XMMAREA_OFFSET) /* " " "" " " */
#define REG_R15 (13 + XMMAREA_OFFSET) /* " " "" " " */
/* ABI calling convention */
#define REG_R9 (14 + XMMAREA_OFFSET) /* " " "" " " */
#define REG_R8 (15 + XMMAREA_OFFSET) /* " " "" " " */
#define REG_RCX (16 + XMMAREA_OFFSET) /* " " "" " " */
#define REG_RDX (17 + XMMAREA_OFFSET) /* " " "" " " */
#define REG_RSI (18 + XMMAREA_OFFSET) /* " " "" " " */
#define REG_RDI (19 + XMMAREA_OFFSET) /* " " "" " " */
/* IRQ saved */
#define REG_ERRCODE (20 + XMMAREA_OFFSET) /* Error code */
#define REG_RIP (21 + XMMAREA_OFFSET) /* Pushed by process on interrupt processing */
#define REG_CS (22 + XMMAREA_OFFSET) /* " " "" " " "" " " " " */
#define REG_RFLAGS (23 + XMMAREA_OFFSET) /* " " "" " " "" " " " " */
#define REG_RSP (24 + XMMAREA_OFFSET) /* " " "" " " "" " " " " */
#define REG_SS (25 + XMMAREA_OFFSET) /* " " "" " " "" " " " " */
/* NOTE 2: This is not really state data. Rather, this is just a convenient
* way to pass parameters from the interrupt handler to C code.
*/
#define XCPTCONTEXT_REGS (26 + XCPTCONTEXT_XMM_AREA_SIZE / 8)
#define XCPTCONTEXT_SIZE (8 * XCPTCONTEXT_REGS + XCPTCONTEXT_XMM_AREA_SIZE)
/****************************************************************************
* Public Types
****************************************************************************/
#ifndef __ASSEMBLY__
enum ioapic_trigger_mode
{
TRIGGER_RISING_EDGE = 0,
TRIGGER_FALLING_EDGE = (1 << 13),
TRIGGER_LEVEL_ACTIVE_HIGH = 1 << 15,
TRIGGER_LEVEL_ACTIVE_LOW = (1 << 15) | (1 << 13),
};
/* This struct defines the way the registers are stored */
struct xcptcontext
{
/* The following function pointer is non-zero if there are pending signals
* to be processed.
*/
#ifndef CONFIG_DISABLE_SIGNALS
void *sigdeliver; /* Actual type is sig_deliver_t */
/* These are saved copies of instruction pointer and EFLAGS used during
* signal processing.
*/
uint64_t saved_rip;
uint64_t saved_rflags;
uint64_t saved_rsp;
#endif
/* Register save area */
uint64_t regs[XCPTCONTEXT_REGS] __attribute__((aligned (16)));
};
#endif
/****************************************************************************
* Inline functions
****************************************************************************/
#ifndef __ASSEMBLY__
/* Name: up_irq_save, up_irq_restore, and friends.
*
* NOTE: This function should never be called from application code and,
* as a general rule unless you really know what you are doing, this
* function should not be called directly from operation system code either:
* Typically, the wrapper functions, enter_critical_section() and
* leave_critical section(), are probably what you really want.
*/
/* Get the current FLAGS register contents */
static inline irqstate_t irqflags()
{
irqstate_t flags;
asm volatile(
"\tpushfq\n"
"\tpopq %0\n"
: "=rm" (flags)
:
: "memory");
return flags;
}
/* Get a sample of the FLAGS register, determine if interrupts are disabled.
* If the X86_FLAGS_IF is cleared by cli, then interrupts are disabled. If
* if the X86_FLAGS_IF is set by sti, then interrupts are enable.
*/
static inline bool up_irq_disabled(irqstate_t flags)
{
return ((flags & X86_64_RFLAGS_IF) == 0);
}
static inline bool up_irq_enabled(irqstate_t flags)
{
return ((flags & X86_64_RFLAGS_IF) != 0);
}
/* Disable interrupts unconditionally */
static inline void up_irq_disable(void)
{
asm volatile("cli": : :"memory");
}
/* Enable interrupts unconditionally */
static inline void up_irq_enable(void)
{
asm volatile("sti": : :"memory");
}
/* Disable interrupts, but return previous interrupt state */
static inline irqstate_t up_irq_save(void)
{
irqstate_t flags = irqflags();
up_irq_disable();
return flags;
}
/* Conditionally disable interrupts */
static inline void up_irq_restore(irqstate_t flags)
{
if (up_irq_enabled(flags))
{
up_irq_enable();
}
}
static inline unsigned int up_apic_cpu_id(void)
{
return read_msr(MSR_X2APIC_ID);
}
/****************************************************************************
* Public Data
****************************************************************************/
/****************************************************************************
* Public Function Prototypes
****************************************************************************/
void up_ioapic_pin_set_vector(unsigned int pin,
enum ioapic_trigger_mode trigger_mode,
unsigned int vector);
#ifdef __cplusplus
#define EXTERN extern "C"
extern "C"
{
#else
#define EXTERN extern
#endif
#undef EXTERN
#ifdef __cplusplus
}
#endif
#endif /* __ASSEMBLY__ */
#endif /* __ARCH_X86_INCLUDE_I486_IRQ_H */