sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
29612c40c5
nuttx/drivers/usbdev/rndis.c

2906 lines
82 KiB
C
Raw Blame History

/****************************************************************************
* drivers/usbdev/rndis.c
*
* Copyright (C) 2011-2018 Gregory Nutt. All rights reserved.
* Authors: Sakari Kapanen <sakari.m.kapanen@gmail.com>,
* Petteri Aimonen <jpa@git.mail.kapsi.fi>
*
* References:
* [MS-RNDIS]:
* Remote Network Driver Interface Specification (RNDIS) Protocol
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <queue.h>
#include <errno.h>
#include <string.h>
#include <stdlib.h>
#include <stdio.h>
#include <nuttx/net/net.h>
#include <nuttx/net/netdev.h>
#include <nuttx/net/arp.h>
#include <nuttx/kmalloc.h>
#include <nuttx/arch.h>
#include <nuttx/usb/usb.h>
#include <nuttx/usb/cdc.h>
#include <nuttx/usb/usbdev.h>
#include <nuttx/usb/usbdev_trace.h>
#include <nuttx/usb/rndis.h>
#include <nuttx/wdog.h>
#include <nuttx/wqueue.h>
#include "rndis_std.h"
/****************************************************************************
* Pre-processor definitions
****************************************************************************/
#define CONFIG_RNDIS_EP0MAXPACKET 64
#ifndef CONFIG_RNDIS_NWRREQS
# define CONFIG_RNDIS_NWRREQS (2)
#endif
#define RNDIS_PACKET_HDR_SIZE (sizeof(struct rndis_packet_msg))
#define CONFIG_RNDIS_BULKIN_REQLEN \
(CONFIG_NET_ETH_PKTSIZE + CONFIG_NET_GUARDSIZE + RNDIS_PACKET_HDR_SIZE)
#define CONFIG_RNDIS_BULKOUT_REQLEN CONFIG_RNDIS_BULKIN_REQLEN
#define RNDIS_NCONFIGS (1)
#define RNDIS_CONFIGID (1)
#define RNDIS_CONFIGIDNONE (0)
#define RNDIS_NINTERFACES (2)
#define RNDIS_EPINTIN_ADDR USB_EPIN(3)
#define RNDIS_EPBULKIN_ADDR USB_EPIN(1)
#define RNDIS_EPBULKOUT_ADDR USB_EPOUT(2)
#define RNDIS_NUM_EPS (3)
#define RNDIS_MANUFACTURERSTRID (1)
#define RNDIS_PRODUCTSTRID (2)
#define RNDIS_SERIALSTRID (3)
#define RNDIS_STR_LANGUAGE (0x0409) /* en-us */
#define RNDIS_MXDESCLEN (128)
#define RNDIS_MAXSTRLEN (RNDIS_MXDESCLEN-2)
#define RNDIS_CTRLREQ_LEN (512)
#define RNDIS_BUFFER_SIZE CONFIG_NET_ETH_PKTSIZE
#define RNDIS_BUFFER_COUNT 4
/* TX poll delay = 1 seconds. CLK_TCK is the number of clock ticks per second */
#define RNDIS_WDDELAY (1*CLK_TCK)
/* Work queue to use for network operations. LPWORK should be used here */
#define ETHWORK LPWORK
#ifndef min
# define min(a,b) ((a)<(b)?(a):(b))
#endif
#ifndef max
# define max(a,b) ((a)>(b)?(a):(b))
#endif
/****************************************************************************
* Private Types
****************************************************************************/
/* Container to support a list of requests */
struct rndis_req_s
{
FAR struct rndis_req_s *flink; /* Implements a singly linked list */
FAR struct usbdev_req_s *req; /* The contained request */
};
/* This structure describes the internal state of the driver */
struct rndis_dev_s
{
struct net_driver_s netdev; /* Network driver structure */
struct usbdev_devinfo_s devinfo;
FAR struct usbdev_s *usbdev; /* usbdev driver pointer */
FAR struct usbdev_ep_s *epintin; /* Interrupt IN endpoint structure */
FAR struct usbdev_ep_s *epbulkin; /* Bulk IN endpoint structure */
FAR struct usbdev_ep_s *epbulkout; /* Bulk OUT endpoint structure */
FAR struct usbdev_req_s *ctrlreq; /* Pointer to preallocated control request */
FAR struct usbdev_req_s *epintin_req; /* Pointer to preallocated interrupt in endpoint request */
FAR struct usbdev_req_s *rdreq; /* Pointer to Preallocated control endpoint read request */
struct sq_queue_s reqlist; /* List of free write request containers */
/* Preallocated USB request buffers */
struct rndis_req_s wrreqs[CONFIG_RNDIS_NWRREQS];
struct work_s rxwork; /* Worker for dispatching RX packets */
WDOG_ID txpoll; /* TX poll watchdog */
struct work_s pollwork; /* TX poll worker */
bool registered; /* Has netdev_register() been called */
uint8_t config; /* USB Configuration number */
FAR struct rndis_req_s *net_req; /* Pointer to request whose buffer is assigned to network */
FAR struct rndis_req_s *rx_req; /* Pointer request container that holds RX buffer */
size_t current_rx_received; /* Number of bytes of current RX datagram received over USB */
size_t current_rx_datagram_size; /* Total number of bytes of the current RX datagram */
size_t current_rx_datagram_offset; /* Offset of current RX datagram */
size_t current_rx_msglen; /* Length of the entire message to be received */
bool rdreq_submitted; /* Indicates if the read request is submitted */
bool rx_blocked; /* Indicates if we can receive packets on bulk in endpoint */
bool ctrlreq_has_encap_response; /* Indicates if ctrlreq buffer holds a response */
bool connected; /* Connection status indicator */
uint32_t rndis_packet_filter; /* RNDIS packet filter value */
uint32_t rndis_host_tx_count; /* TX packet counter */
uint32_t rndis_host_rx_count; /* RX packet counter */
uint8_t host_mac_address[6]; /* Host side MAC address */
};
/* The internal version of the class driver */
struct rndis_driver_s
{
struct usbdevclass_driver_s drvr;
FAR struct rndis_dev_s *dev;
};
/* This is what is allocated */
struct rndis_alloc_s
{
struct rndis_dev_s dev;
struct rndis_driver_s drvr;
};
/* RNDIS USB configuration descriptor */
struct rndis_cfgdesc_s
{
#ifndef CONFIG_RNDIS_COMPOSITE
struct usb_cfgdesc_s cfgdesc; /* Configuration descriptor */
#endif
struct usb_iaddesc_s assoc_desc; /* Interface association descriptor */
struct usb_ifdesc_s comm_ifdesc; /* Communication interface descriptor */
struct usb_epdesc_s epintindesc; /* Interrupt endpoint descriptor */
struct usb_ifdesc_s data_ifdesc; /* Data interface descriptor */
struct usb_epdesc_s epbulkindesc; /* Bulk in interface descriptor */
struct usb_epdesc_s epbulkoutdesc; /* Bulk out interface descriptor */
};
/* RNDIS object ID - value pair structure */
struct rndis_oid_value_s
{
uint32_t objid;
uint32_t length;
uint32_t value;
FAR const void *data; /* Data pointer overrides value if non-NULL. */
};
/****************************************************************************
* Private Function Prototypes
****************************************************************************/
/* Netdev driver callbacks */
static int rndis_ifup(FAR struct net_driver_s *dev);
static int rndis_ifdown(FAR struct net_driver_s *dev);
static int rndis_txavail(FAR struct net_driver_s *dev);
static int rndis_transmit(FAR struct rndis_dev_s *priv);
static int rndis_txpoll(FAR struct net_driver_s *dev);
static void rndis_polltimer(int argc, uint32_t arg, ...);
/* usbclass callbacks */
static int usbclass_setup(FAR struct usbdevclass_driver_s *driver,
FAR struct usbdev_s *dev,
FAR const struct usb_ctrlreq_s *ctrl,
FAR uint8_t *dataout, size_t outlen);
static int usbclass_bind(FAR struct usbdevclass_driver_s *driver,
FAR struct usbdev_s *dev);
static void usbclass_unbind(FAR struct usbdevclass_driver_s *driver,
FAR struct usbdev_s *dev);
static void usbclass_disconnect(FAR struct usbdevclass_driver_s *driver,
FAR struct usbdev_s *dev);
static int usbclass_setconfig(FAR struct rndis_dev_s *priv, uint8_t config);
static void usbclass_resetconfig(FAR struct rndis_dev_s *priv);
/* usbclass helpers */
static int usbclass_copy_epdesc(int epid, FAR struct usb_epdesc_s *epdesc,
FAR struct usbdev_devinfo_s *devinfo,
bool hispeed);
/****************************************************************************
* Private Data
****************************************************************************/
/* USB driver operations */
const static struct usbdevclass_driverops_s g_driverops =
{
&usbclass_bind,
&usbclass_unbind,
&usbclass_setup,
&usbclass_disconnect,
NULL,
NULL
};
#ifndef CONFIG_RNDIS_COMPOSITE
static const struct usb_devdesc_s g_devdesc =
{
USB_SIZEOF_DEVDESC, /* len */
USB_DESC_TYPE_DEVICE, /* type */
{LSBYTE(0x0200), MSBYTE(0x0200)}, /* usb */
0, /* classid */
0, /* subclass */
0, /* protocol */
CONFIG_RNDIS_EP0MAXPACKET, /* maxpacketsize */
{ LSBYTE(CONFIG_RNDIS_VENDORID), /* vendor */
MSBYTE(CONFIG_RNDIS_VENDORID) },
{ LSBYTE(CONFIG_RNDIS_PRODUCTID), /* product */
MSBYTE(CONFIG_RNDIS_PRODUCTID) },
{ LSBYTE(CONFIG_RNDIS_VERSIONNO), /* device */
MSBYTE(CONFIG_RNDIS_VERSIONNO) },
RNDIS_MANUFACTURERSTRID, /* imfgr */
RNDIS_PRODUCTSTRID, /* iproduct */
RNDIS_SERIALSTRID, /* serno */
RNDIS_NCONFIGS /* nconfigs */
};
#endif
const static struct rndis_cfgdesc_s g_rndis_cfgdesc =
{
#ifndef CONFIG_RNDIS_COMPOSITE
{
.len = USB_SIZEOF_CFGDESC,
.type = USB_DESC_TYPE_CONFIG,
.totallen = {0, 0},
.ninterfaces = RNDIS_NINTERFACES,
.cfgvalue = RNDIS_CONFIGID,
.icfg = 0,
.attr = USB_CONFIG_ATTR_ONE | USB_CONFIG_ATTR_SELFPOWER,
.mxpower = (CONFIG_USBDEV_MAXPOWER + 1) / 2
},
#endif
{
.len = USB_SIZEOF_IADDESC,
.type = USB_DESC_TYPE_INTERFACEASSOCIATION,
.firstif = 0,
.nifs = RNDIS_NINTERFACES,
.classid = 0xef,
.subclass = 0x04,
.protocol = 0x01,
.ifunction = 0
},
{
.len = USB_SIZEOF_IFDESC,
.type = USB_DESC_TYPE_INTERFACE,
.ifno = 0,
.alt = 0,
.neps = 1,
.classid = USB_CLASS_CDC,
.subclass = CDC_SUBCLASS_ACM,
.protocol = CDC_PROTO_VENDOR,
.iif = 0
},
{
.len = USB_SIZEOF_EPDESC,
.type = USB_DESC_TYPE_ENDPOINT,
.addr = RNDIS_EPINTIN_ADDR,
.attr = USB_EP_ATTR_XFER_INT,
.mxpacketsize = { LSBYTE(16), MSBYTE(16) },
.interval = 1
},
{
.len = USB_SIZEOF_IFDESC,
.type = USB_DESC_TYPE_INTERFACE,
.ifno = 1,
.alt = 0,
.neps = 2,
.classid = USB_CLASS_CDC_DATA,
.subclass = 0,
.protocol = 0,
.iif = 0
},
{
.len = USB_SIZEOF_EPDESC,
.type = USB_DESC_TYPE_ENDPOINT,
.addr = RNDIS_EPBULKIN_ADDR,
.attr = USB_EP_ATTR_XFER_BULK,
#ifdef CONFIG_USBDEV_DUALSPEED
.mxpacketsize = { LSBYTE(512), MSBYTE(512) },
.interval = 0
#else
.mxpacketsize = { LSBYTE(64), MSBYTE(64) },
.interval = 1
#endif
},
{
.len = USB_SIZEOF_EPDESC,
.type = USB_DESC_TYPE_ENDPOINT,
.addr = RNDIS_EPBULKOUT_ADDR,
.attr = USB_EP_ATTR_XFER_BULK,
#ifdef CONFIG_USBDEV_DUALSPEED
.mxpacketsize = { LSBYTE(512), MSBYTE(512) },
.interval = 0
#else
.mxpacketsize = { LSBYTE(64), MSBYTE(64) },
.interval = 1
#endif
}
};
/* Default MAC address given to the host side of the interface. */
static uint8_t g_rndis_default_mac_addr[6] =
{
0x02, 0x00, 0x00, 0x11, 0x22, 0x33
};
/* These lists give dummy responses to be returned to PC. The values are
* chosen so that Windows is happy - other operating systems don't really care
* much.
*/
static const uint32_t g_rndis_supported_oids[] =
{
RNDIS_OID_GEN_SUPPORTED_LIST,
RNDIS_OID_GEN_HARDWARE_STATUS,
RNDIS_OID_GEN_MEDIA_SUPPORTED,
RNDIS_OID_GEN_MEDIA_IN_USE,
RNDIS_OID_GEN_MAXIMUM_FRAME_SIZE,
RNDIS_OID_GEN_LINK_SPEED,
RNDIS_OID_GEN_TRANSMIT_BLOCK_SIZE,
RNDIS_OID_GEN_RECEIVE_BLOCK_SIZE,
RNDIS_OID_GEN_VENDOR_ID,
RNDIS_OID_GEN_VENDOR_DESCRIPTION,
RNDIS_OID_GEN_VENDOR_DRIVER_VERSION,
RNDIS_OID_GEN_CURRENT_PACKET_FILTER,
RNDIS_OID_GEN_MAXIMUM_TOTAL_SIZE,
RNDIS_OID_GEN_MEDIA_CONNECT_STATUS,
RNDIS_OID_GEN_PHYSICAL_MEDIUM,
RNDIS_OID_GEN_XMIT_OK,
RNDIS_OID_GEN_RCV_OK,
RNDIS_OID_GEN_XMIT_ERROR,
RNDIS_OID_GEN_RCV_ERROR,
RNDIS_OID_GEN_RCV_NO_BUFFER,
RNDIS_OID_802_3_PERMANENT_ADDRESS,
RNDIS_OID_802_3_CURRENT_ADDRESS,
RNDIS_OID_802_3_MULTICAST_LIST,
RNDIS_OID_802_3_MAC_OPTIONS,
RNDIS_OID_802_3_MAXIMUM_LIST_SIZE,
RNDIS_OID_802_3_RCV_ERROR_ALIGNMENT,
RNDIS_OID_802_3_XMIT_ONE_COLLISION,
RNDIS_OID_802_3_XMIT_MORE_COLLISION,
};
static const struct rndis_oid_value_s g_rndis_oid_values[] =
{
{RNDIS_OID_GEN_SUPPORTED_LIST, sizeof(g_rndis_supported_oids), 0, g_rndis_supported_oids},
{RNDIS_OID_GEN_MAXIMUM_FRAME_SIZE, 4, CONFIG_NET_ETH_PKTSIZE, NULL},
#ifdef CONFIG_USBDEV_DUALSPEED
{RNDIS_OID_GEN_LINK_SPEED, 4, 100000, NULL},
#else
{RNDIS_OID_GEN_LINK_SPEED, 4, 2000000, NULL},
#endif
{RNDIS_OID_GEN_TRANSMIT_BLOCK_SIZE, 4, CONFIG_NET_ETH_PKTSIZE, NULL},
{RNDIS_OID_GEN_RECEIVE_BLOCK_SIZE, 4, CONFIG_NET_ETH_PKTSIZE, NULL},
{RNDIS_OID_GEN_VENDOR_ID, 4, 0x00FFFFFF, NULL},
{RNDIS_OID_GEN_VENDOR_DESCRIPTION, 6, 0, "RNDIS"},
{RNDIS_OID_GEN_CURRENT_PACKET_FILTER, 4, 0, NULL},
{RNDIS_OID_GEN_MAXIMUM_TOTAL_SIZE, 4, 2048, NULL},
{RNDIS_OID_GEN_XMIT_OK, 4, 0, NULL},
{RNDIS_OID_GEN_RCV_OK, 4, 0, NULL},
{RNDIS_OID_802_3_PERMANENT_ADDRESS, 6, 0, NULL},
{RNDIS_OID_802_3_CURRENT_ADDRESS, 6, 0, NULL},
{RNDIS_OID_802_3_MULTICAST_LIST, 4, 0xE0000000, NULL},
{RNDIS_OID_802_3_MAXIMUM_LIST_SIZE, 4, 1, NULL},
{0x0, 4, 0, NULL}, /* Default fallback */
};
/****************************************************************************
* Private Data
****************************************************************************/
/****************************************************************************
* Buffering of data is implemented in the following manner:
*
* RNDIS driver holds a number of preallocated bulk IN endpoint write
* requests along with buffers large enough to hold an Ethernet packet and
* the corresponding RNDIS header.
*
* One of these is always reserved for packet reception - when data arrives
* on the bulk OUT endpoint, it is copied to the reserved request buffer.
* When the reception of an Ethernet packet is complete, a worker to process
* the packet is scheduled and bulk OUT endpoint is set to NAK.
*
* The processing worker passes the buffer to the network. When the network is
* done processing the packet, the buffer might contain data to be sent.
* If so, the corresponding write request is queued on the bulk IN endpoint.
* The NAK state on bulk OUT endpoint is cleared to allow new packets to
* arrive. If there's no data to send, the request is returned to the list of
* free requests.
*
* When a bulk IN write operation is complete, the request is added to the
* list of free requests.
*
****************************************************************************/
/****************************************************************************
* Name: rndis_submit_rdreq
*
* Description:
* Submits the bulk OUT read request. Takes care not to submit the request
* when the RX packet buffer is already in use.
*
* Input Parameters:
* priv: pointer to RNDIS device driver structure
*
* Returned Value:
* The return value of the EP_SUBMIT operation
*
****************************************************************************/
static int rndis_submit_rdreq(FAR struct rndis_dev_s *priv)
{
irqstate_t flags = enter_critical_section();
int ret = OK;
if (!priv->rdreq_submitted && !priv->rx_blocked)
{
priv->rdreq->len = priv->epbulkout->maxpacket;
ret = EP_SUBMIT(priv->epbulkout, priv->rdreq);
if (ret != OK)
{
usbtrace(TRACE_CLSERROR(USBSER_TRACEERR_RDSUBMIT),
(uint16_t)-priv->rdreq->result);
}
else
{
priv->rdreq_submitted = true;
}
}
leave_critical_section(flags);
return ret;
}
/****************************************************************************
* Name: rndis_cancel_rdreq
*
* Description:
* Cancels the bulk OUT endpoint read request.
*
* Input Parameters:
* priv: pointer to RNDIS device driver structure
*
****************************************************************************/
static void rndis_cancel_rdreq(FAR struct rndis_dev_s *priv)
{
irqstate_t flags = enter_critical_section();
if (priv->rdreq_submitted)
{
EP_CANCEL(priv->epbulkout, priv->rdreq);
priv->rdreq_submitted = false;
}
leave_critical_section(flags);
}
/****************************************************************************
* Name: rndis_block_rx
*
* Description:
* Blocks reception of further bulk OUT endpoint data.
*
* Input Parameters:
* priv: pointer to RNDIS device driver structure
*
****************************************************************************/
static void rndis_block_rx(FAR struct rndis_dev_s *priv)
{
irqstate_t flags = enter_critical_section();
priv->rx_blocked = true;
rndis_cancel_rdreq(priv);
leave_critical_section(flags);
}
/****************************************************************************
* Name: rndis_unblock_rx
*
* Description:
* Unblocks reception of bulk OUT endpoint data.
*
* Input Parameters:
* priv: pointer to RNDIS device driver structure
*
* Assumptions:
* Called from critical section
*
****************************************************************************/
static void rndis_unblock_rx(FAR struct rndis_dev_s *priv)
{
priv->rx_blocked = false;
}
/****************************************************************************
* Name: rndis_allocwrreq
*
* Description:
* Allocates a bulk IN endpoint request from the list of free request
* buffers.
*
* Input Parameters:
* priv: pointer to RNDIS device driver structure
*
* Returned Value:
* NULL if allocation failed; pointer to allocated request if succeeded
*
* Assumptions:
* Called from critical section
*
****************************************************************************/
static FAR struct rndis_req_s *rndis_allocwrreq(FAR struct rndis_dev_s *priv)
{
return (FAR struct rndis_req_s *)sq_remfirst(&priv->reqlist);
}
/****************************************************************************
* Name: rndis_hasfreereqs
*
* Description:
* Checks if there are free requests usable for TX data.
*
* Input Parameters:
* priv: pointer to RNDIS device driver structure
*
* Returned Value:
* true if requests available; false if no requests available
*
* Assumptions:
* Called from critical section
*
****************************************************************************/
static bool rndis_hasfreereqs(FAR struct rndis_dev_s *priv)
{
return sq_count(&priv->reqlist) > 1;
}
/****************************************************************************
* Name: rndis_freewrreq
*
* Description:
* Returns a bulk IN endpoint write requests to the list of free requests.
*
* Input Parameters:
* priv: pointer to RNDIS device driver structure
* req: pointer to the request
*
* Assumptions:
* Called with interrupts disabled.
*
****************************************************************************/
static void rndis_freewrreq(FAR struct rndis_dev_s *priv,
FAR struct rndis_req_s *req)
{
DEBUGASSERT(req != NULL);
sq_addlast((FAR sq_entry_t *)req, &priv->reqlist);
rndis_submit_rdreq(priv);
}
/****************************************************************************
* Name: rndis_allocnetreq
*
* Description:
* Allocates a request buffer to be used on the network.
*
* Input Parameters:
* priv: pointer to RNDIS device driver structure
*
* Returned Value:
* true if succeeded; false if failed
*
* Assumptions:
* Caller holds the network lock
*
****************************************************************************/
static bool rndis_allocnetreq(FAR struct rndis_dev_s *priv)
{
irqstate_t flags = enter_critical_section();
DEBUGASSERT(priv->net_req == NULL);
if (!rndis_hasfreereqs(priv))
{
leave_critical_section(flags);
return false;
}
priv->net_req = rndis_allocwrreq(priv);
if (priv->net_req)
{
priv->netdev.d_buf = &priv->net_req->req->buf[RNDIS_PACKET_HDR_SIZE];
priv->netdev.d_len = CONFIG_NET_ETH_PKTSIZE;
}
leave_critical_section(flags);
return priv->net_req != NULL;
}
/****************************************************************************
* Name: rndis_sendnetreq
*
* Description:
* Submits the request buffer held by the network.
*
* Input Parameters:
* priv: pointer to RNDIS device driver structure
*
* Assumptions:
* Caller holds the network lock
*
****************************************************************************/
static void rndis_sendnetreq(FAR struct rndis_dev_s *priv)
{
irqstate_t flags = enter_critical_section();
DEBUGASSERT(priv->net_req != NULL);
priv->net_req->req->priv = priv->net_req;
EP_SUBMIT(priv->epbulkin, priv->net_req->req);
priv->net_req = NULL;
priv->netdev.d_buf = NULL;
priv->netdev.d_len = 0;
leave_critical_section(flags);
}
/****************************************************************************
* Name: rndis_freenetreq
*
* Description:
* Frees the request buffer held by the network.
*
* Input Parameters:
* priv: pointer to RNDIS device driver structure
*
* Assumptions:
* Caller holds the network lock
*
****************************************************************************/
static void rndis_freenetreq(FAR struct rndis_dev_s *priv)
{
irqstate_t flags = enter_critical_section();
rndis_freewrreq(priv, priv->net_req);
priv->net_req = NULL;
priv->netdev.d_buf = NULL;
priv->netdev.d_len = 0;
leave_critical_section(flags);
}
/****************************************************************************
* Name: rndis_allocrxreq
*
* Description:
* Allocates a buffer for packet reception if there already isn't one.
*
* Input Parameters:
* priv: pointer to RNDIS device driver structure
*
* Returned Value:
* true if succeeded; false if failed
*
* Assumptions:
* Called from critical section
*
****************************************************************************/
static bool rndis_allocrxreq(FAR struct rndis_dev_s *priv)
{
if (priv->rx_req != NULL)
{
return true;
}
priv->rx_req = rndis_allocwrreq(priv);
return priv->rx_req != NULL;
}
/****************************************************************************
* Name: rndis_giverxreq
*
* Description:
* Passes the RX packet buffer to the network
*
* Input Parameters:
* priv: pointer to RNDIS device driver structure
*
* Assumptions:
* Caller holds the network lock
*
****************************************************************************/
static void rndis_giverxreq(FAR struct rndis_dev_s *priv)
{
DEBUGASSERT(priv->rx_req != NULL);
DEBUGASSERT(priv->net_req == NULL);
priv->net_req = priv->rx_req;
priv->netdev.d_buf = &priv->net_req->req->buf[RNDIS_PACKET_HDR_SIZE];
priv->netdev.d_len = CONFIG_NET_ETH_PKTSIZE;
priv->rx_req = NULL;
}
/****************************************************************************
* Name: rndis_fillrequest
*
* Description:
* Fills the RNDIS header to the request buffer
*
* Input Parameters:
* priv: pointer to RNDIS device driver structure
* req: the request whose buffer we should fill
*
* Returned Value:
* The total length of the request data
*
* Assumptions:
* Caller holds the network lock
*
****************************************************************************/
static uint16_t rndis_fillrequest(FAR struct rndis_dev_s *priv,
FAR struct usbdev_req_s *req)
{
size_t datalen;
req->len = 0;
datalen = min(priv->netdev.d_len,
CONFIG_RNDIS_BULKIN_REQLEN - RNDIS_PACKET_HDR_SIZE);
if (datalen > 0)
{
/* Send the required headers */
FAR struct rndis_packet_msg *msg = (FAR struct rndis_packet_msg *)req->buf;
memset(msg, 0, RNDIS_PACKET_HDR_SIZE);
msg->msgtype = RNDIS_PACKET_MSG;
msg->msglen = RNDIS_PACKET_HDR_SIZE + datalen;
msg->dataoffset = RNDIS_PACKET_HDR_SIZE - 8;
msg->datalen = datalen;
req->flags = USBDEV_REQFLAGS_NULLPKT;
req->len = datalen + RNDIS_PACKET_HDR_SIZE;
}
return req->len;
}
/****************************************************************************
* Name: rndis_rxdispatch
*
* Description:
* Processes the received Ethernet packet. Called from work queue.
*
* Input Parameters:
* arg: pointer to RNDIS device driver structure
*
****************************************************************************/
static void rndis_rxdispatch(FAR void *arg)
{
FAR struct rndis_dev_s *priv = (FAR struct rndis_dev_s *)arg;
FAR struct eth_hdr_s *hdr;
irqstate_t flags;
net_lock();
flags = enter_critical_section();
rndis_giverxreq(priv);
priv->netdev.d_len = priv->current_rx_datagram_size;
leave_critical_section(flags);
hdr = (FAR struct eth_hdr_s *)priv->netdev.d_buf;
/* We only accept IP packets of the configured type and ARP packets */
#ifdef CONFIG_NET_IPv4
if (hdr->type == HTONS(ETHTYPE_IP))
{
NETDEV_RXIPV4(&priv->netdev);
/* Handle ARP on input then give the IPv4 packet to the network
* layer
*/
arp_ipin(&priv->netdev);
ipv4_input(&priv->netdev);
if (priv->netdev.d_len > 0)
{
/* Update the Ethernet header with the correct MAC address */
#ifdef CONFIG_NET_IPv6
if (IFF_IS_IPv4(priv->netdev.d_flags))
#endif
{
arp_out(&priv->netdev);
}
#ifdef CONFIG_NET_IPv6
else
{
neighbor_out(&priv->netdev);
}
#endif
/* And send the packet */
rndis_transmit(priv);
}
}
else
#endif
#ifdef CONFIG_NET_IPv6
if (hdr->type == HTONS(ETHTYPE_IP6))
{
NETDEV_RXIPV6(&priv->netdev);
/* Give the IPv6 packet to the network layer */
arp_ipin(&priv->netdev);
ipv6_input(&priv->netdev);
if (priv->netdev.d_len > 0)
{
/* Update the Ethernet header with the correct MAC address */
#ifdef CONFIG_NET_IPv4
if (IFF_IS_IPv4(priv->netdev.d_flags))
{
arp_out(&priv->netdev);
}
else
#endif
#ifdef CONFIG_NET_IPv6
{
neighbor_out(&priv->netdev);
}
#endif
/* And send the packet */
rndis_transmit(priv);
}
}
else
#endif
#ifdef CONFIG_NET_ARP
if (hdr->type == htons(ETHTYPE_ARP))
{
NETDEV_RXARP(&priv->netdev);
arp_arpin(&priv->netdev);
if (priv->netdev.d_len > 0)
{
rndis_transmit(priv);
}
}
else
#endif
{
uerr("ERROR: Unsupported packet type dropped (%02x)\n", htons(hdr->type));
NETDEV_RXDROPPED(&priv->netdev);
priv->netdev.d_len = 0;
}
priv->current_rx_datagram_size = 0;
rndis_unblock_rx(priv);
if (priv->net_req != NULL)
{
rndis_freenetreq(priv);
}
net_unlock();
}
/****************************************************************************
* Name: rndis_txpoll
*
* Description:
* Sends the packet that is stored in the network packet buffer. Called
* from work queue by e.g. txavail and txpoll callbacks.
*
* Input Parameters:
* dev: pointer to network driver structure
*
* Assumptions:
* Caller holds the network lock
*
****************************************************************************/
static int rndis_txpoll(FAR struct net_driver_s *dev)
{
FAR struct rndis_dev_s *priv = (FAR struct rndis_dev_s *)dev->d_private;
int ret = OK;
if (!priv->connected)
{
return -EBUSY;
}
/* If the polling resulted in data that should be sent out on the network,
* the field d_len is set to a value > 0.
*/
ninfo("Poll result: d_len=%d\n", priv->netdev.d_len);
if (priv->netdev.d_len > 0)
{
/* Look up the destination MAC address and add it to the Ethernet
* header.
*/
#ifdef CONFIG_NET_IPv4
#ifdef CONFIG_NET_IPv6
if (IFF_IS_IPv4(priv->netdev.d_flags))
#endif
{
arp_out(&priv->netdev);
}
#endif /* CONFIG_NET_IPv4 */
#ifdef CONFIG_NET_IPv6
#ifdef CONFIG_NET_IPv4
else
#endif
{
neighbor_out(&priv->netdev);
}
#endif /* CONFIG_NET_IPv6 */
if (!devif_loopback(&priv->netdev))
{
ret = rndis_transmit(priv);
}
}
/* If zero is returned, the polling will continue until all connections have
* been examined.
*/
return ret;
}
/****************************************************************************
* Name: rndis_transmit
*
* Description:
* Start hardware transmission.
*
****************************************************************************/
static int rndis_transmit(FAR struct rndis_dev_s *priv)
{
int ret = OK;
/* Queue the packet */
rndis_fillrequest(priv, priv->net_req->req);
rndis_sendnetreq(priv);
if (!rndis_allocnetreq(priv))
{
ret = -EBUSY;
}
return ret;
}
/****************************************************************************
* Name: rndis_pollworker
*
* Description:
* Worker function called by txpoll worker.
*
****************************************************************************/
static void rndis_pollworker(FAR void *arg)
{
FAR struct rndis_dev_s *priv = (struct rndis_dev_s *)arg;
DEBUGASSERT(priv != NULL);
net_lock();
if (rndis_allocnetreq(priv))
{
devif_timer(&priv->netdev, rndis_txpoll);
if (priv->net_req != NULL)
{
rndis_freenetreq(priv);
}
}
net_unlock();
}
/****************************************************************************
* Name: rndis_polltimer
*
* Description:
* Network poll watchdog timer callback
*
****************************************************************************/
static void rndis_polltimer(int argc, uint32_t arg, ...)
{
FAR struct rndis_dev_s *priv = (FAR struct rndis_dev_s *)arg;
int ret;
if (work_available(&priv->pollwork))
{
ret = work_queue(ETHWORK, &priv->pollwork, rndis_pollworker,
(FAR void *)priv, 0);
DEBUGASSERT(ret == OK);
UNUSED(ret);
}
/* Setup the watchdog poll timer again */
(void)wd_start(priv->txpoll, RNDIS_WDDELAY, rndis_polltimer, 1,
(wdparm_t)arg);
}
/****************************************************************************
* Name: rndis_ifup
*
* Description:
* Network ifup callback
*
****************************************************************************/
static int rndis_ifup(FAR struct net_driver_s *dev)
{
FAR struct rndis_dev_s *priv = (FAR struct rndis_dev_s *)dev->d_private;
(void)wd_start(priv->txpoll, RNDIS_WDDELAY, rndis_polltimer,
1, (wdparm_t)priv);
return OK;
}
/****************************************************************************
* Name: rndis_ifdown
*
* Description:
* Network ifdown callback
*
****************************************************************************/
static int rndis_ifdown(FAR struct net_driver_s *dev)
{
FAR struct rndis_dev_s *priv = (FAR struct rndis_dev_s *)dev->d_private;
wd_cancel(priv->txpoll);
return OK;
}
/****************************************************************************
* Name: rndis_txavail_work
*
* Description:
* txavail worker function
*
****************************************************************************/
static void rndis_txavail_work(FAR void *arg)
{
FAR struct rndis_dev_s *priv = (FAR struct rndis_dev_s *)arg;
net_lock();
if (rndis_allocnetreq(priv))
{
devif_poll(&priv->netdev, rndis_txpoll);
if (priv->net_req != NULL)
{
rndis_freenetreq(priv);
}
}
net_unlock();
}
/****************************************************************************
* Name: rndis_txavail
*
* Description:
* Network txavail callback that's called when there are buffers available
* for sending data. May be called from an interrupt, so we must queue a
* worker to do the actual processing.
*
****************************************************************************/
static int rndis_txavail(FAR struct net_driver_s *dev)
{
FAR struct rndis_dev_s *priv = (FAR struct rndis_dev_s *)dev->d_private;
if (work_available(&priv->pollwork))
{
work_queue(ETHWORK, &priv->pollwork, rndis_txavail_work, priv, 0);
}
return OK;
}
/************************************************************************************
* Name: rndis_recvpacket
*
* Description:
* Handles a USB packet arriving on the data bulk out endpoint.
*
* Assumptions:
* Called from the USB interrupt handler with interrupts disabled.
*
************************************************************************************/
static inline int rndis_recvpacket(FAR struct rndis_dev_s *priv,
FAR uint8_t *reqbuf, uint16_t reqlen)
{
if (!rndis_allocrxreq(priv))
{
return -ENOMEM;
}
if (!priv->connected)
{
return -EBUSY;
}
if (!priv->current_rx_datagram_size)
{
if (reqlen < 16)
{
/* Packet too small to contain a message header */
}
else
{
/* The packet contains a RNDIS packet message header */
FAR struct rndis_packet_msg *msg = (FAR struct rndis_packet_msg *)reqbuf;
if (msg->msgtype == RNDIS_PACKET_MSG)
{
priv->current_rx_received = reqlen;
priv->current_rx_datagram_size = msg->datalen;
priv->current_rx_msglen = msg->msglen;
/* According to RNDIS-over-USB send, if the message length is a
* multiple of endpoint max packet size, the host must send an
* additional single-byte zero packet. Take that in account here.
*/
if ((priv->current_rx_msglen % priv->epbulkout->maxpacket) == 0)
{
priv->current_rx_msglen += 1;
}
/* Data offset is defined as an offset from the beginning of the
* offset field itself
*/
priv->current_rx_datagram_offset = msg->dataoffset + 8;
if (priv->current_rx_datagram_offset < reqlen)
{
memcpy(&priv->rx_req->req->buf[RNDIS_PACKET_HDR_SIZE],
&reqbuf[priv->current_rx_datagram_offset],
reqlen - priv->current_rx_datagram_offset);
}
}
else
{
uerr("Unknown RNDIS message type %u\n", msg->msgtype);
}
}
}
else
{
if (priv->current_rx_received >= priv->current_rx_datagram_offset &&
priv->current_rx_received <= priv->current_rx_datagram_size +
priv->current_rx_datagram_offset)
{
size_t index = priv->current_rx_received - priv->current_rx_datagram_offset;
size_t copysize = min(reqlen, priv->current_rx_datagram_size - index);
/* Check if the received packet exceeds request buffer */
if ((index + copysize) <= CONFIG_NET_ETH_PKTSIZE)
{
memcpy(&priv->rx_req->req->buf[RNDIS_PACKET_HDR_SIZE + index], reqbuf,
copysize);
}
else
{
uerr("The packet exceeds request buffer (reqlen=%d) \n", reqlen);
}
}
priv->current_rx_received += reqlen;
}
if (priv->current_rx_received >= priv->current_rx_msglen)
{
/* Check for a usable packet length (4 added for the CRC) */
if (priv->current_rx_datagram_size > (CONFIG_NET_ETH_PKTSIZE + 4) ||
priv->current_rx_datagram_size <= (ETH_HDRLEN + 4))
{
uerr("ERROR: Bad packet size dropped (%d)\n",
priv->current_rx_datagram_size);
NETDEV_RXERRORS(&priv->netdev);
priv->current_rx_datagram_size = 0;
}
else
{
int ret;
DEBUGASSERT(work_available(&priv->rxwork));
ret = work_queue(ETHWORK, &priv->rxwork, rndis_rxdispatch,
priv, 0);
DEBUGASSERT(ret == 0);
UNUSED(ret);
rndis_block_rx(priv);
priv->rndis_host_tx_count++;
return -EBUSY;
}
}
return OK;
}
/****************************************************************************
* Name: rndis_prepare_response
*
* Description:
* Passes the RX packet buffer to the network
*
* Input Parameters:
* priv: pointer to RNDIS device driver structure
*
* Assumptions:
* Called from critical section
*
****************************************************************************/
static bool rndis_prepare_response(FAR struct rndis_dev_s *priv, size_t size,
FAR struct rndis_command_header *request_hdr)
{
FAR struct rndis_response_header *hdr =
(FAR struct rndis_response_header *)priv->ctrlreq->buf;
hdr->msgtype = request_hdr->msgtype | RNDIS_MSG_COMPLETE;
hdr->msglen = size;
hdr->reqid = request_hdr->reqid;
hdr->status = RNDIS_STATUS_SUCCESS;
priv->ctrlreq_has_encap_response = true;
return true;
}
/****************************************************************************
* Name: rndis_send_encapsulated_response
*
* Description:
* Give a notification to the host that there is an encapsulated response
* available.
*
* Input Parameters:
* priv: pointer to RNDIS device driver structure
*
* Assumptions:
* Called from critical section
*
****************************************************************************/
static int rndis_send_encapsulated_response(FAR struct rndis_dev_s *priv)
{
FAR struct rndis_notification *notif =
(FAR struct rndis_notification *)priv->epintin_req->buf;
notif->notification = RNDIS_NOTIFICATION_RESPONSE_AVAILABLE;
notif->reserved = 0;
priv->epintin_req->len = sizeof(struct rndis_notification);
EP_CANCEL(priv->epintin, priv->epintin_req);
EP_SUBMIT(priv->epintin, priv->epintin_req);
return OK;
}
/****************************************************************************
* Name: rndis_handle_control_message
*
* Description:
* Handle a RNDIS control message.
*
* Input Parameters:
* priv: pointer to RNDIS device driver structure
*
* Assumptions:
* Called from critical section
*
****************************************************************************/
static int rndis_handle_control_message(FAR struct rndis_dev_s *priv,
FAR uint8_t *dataout, uint16_t outlen)
{
FAR struct rndis_command_header *cmd_hdr =
(FAR struct rndis_command_header *)dataout;
switch (cmd_hdr->msgtype)
{
case RNDIS_INITIALIZE_MSG:
{
FAR struct rndis_initialize_cmplt *resp;
rndis_prepare_response(priv, sizeof(struct rndis_initialize_cmplt), cmd_hdr);
resp = (FAR struct rndis_initialize_cmplt *)priv->ctrlreq->buf;
resp->major = RNDIS_MAJOR_VERSION;
resp->minor = RNDIS_MINOR_VERSION;
resp->devflags = RNDIS_DEVICEFLAGS;
resp->medium = RNDIS_MEDIUM_802_3;
resp->pktperxfer = 1;
resp->xfrsize = (4 + 44 + 22) + RNDIS_BUFFER_SIZE;
resp->pktalign = 2;
rndis_send_encapsulated_response(priv);
}
break;
case RNDIS_HALT_MSG:
{
priv->connected = false;
}
break;
case RNDIS_QUERY_MSG:
{
int i;
size_t max_reply_size = sizeof(struct rndis_query_cmplt) +
sizeof(g_rndis_supported_oids);
rndis_prepare_response(priv, max_reply_size, cmd_hdr);
FAR struct rndis_query_msg *req =
(FAR struct rndis_query_msg *)dataout;
FAR struct rndis_query_cmplt *resp =
(FAR struct rndis_query_cmplt *)priv->ctrlreq->buf;
resp->hdr.msglen = sizeof(struct rndis_query_cmplt);
resp->bufoffset = 0;
resp->buflen = 0;
resp->hdr.status = RNDIS_STATUS_NOT_SUPPORTED;
for (i = 0;
i < sizeof(g_rndis_oid_values)/sizeof(g_rndis_oid_values[0]);
i++)
{
bool match = (g_rndis_oid_values[i].objid == req->objid);
if (!match && g_rndis_oid_values[i].objid == 0)
{
int j;
/* Check whether to apply the fallback entry */
for (j = 0; j < sizeof(g_rndis_supported_oids)/sizeof(uint32_t); j++)
{
if (g_rndis_supported_oids[j] == req->objid)
{
match = true;
break;
}
}
}
if (match)
{
resp->hdr.status = RNDIS_STATUS_SUCCESS;
resp->bufoffset = 16;
resp->buflen = g_rndis_oid_values[i].length;
if (req->objid == RNDIS_OID_GEN_CURRENT_PACKET_FILTER)
{
resp->buffer[0] = priv->rndis_packet_filter;
}
else if (req->objid == RNDIS_OID_GEN_XMIT_OK)
{
resp->buffer[0] = priv->rndis_host_tx_count;
}
else if (req->objid == RNDIS_OID_GEN_RCV_OK)
{
resp->buffer[0] = priv->rndis_host_rx_count;
}
else if (req->objid == RNDIS_OID_802_3_CURRENT_ADDRESS ||
req->objid == RNDIS_OID_802_3_PERMANENT_ADDRESS)
{
memcpy(resp->buffer, priv->host_mac_address, 6);
}
else if (g_rndis_oid_values[i].data)
{
memcpy(resp->buffer, g_rndis_oid_values[i].data,
resp->buflen);
}
else
{
memcpy(resp->buffer, &g_rndis_oid_values[i].value,
resp->buflen);
}
break;
}
}
uinfo("RNDIS Query RID=%08x OID=%08x LEN=%d DAT=%08x",
(unsigned)req->hdr.reqid, (unsigned)req->objid,
(int)resp->buflen, (unsigned)resp->buffer[0]);
resp->hdr.msglen += resp->buflen;
rndis_send_encapsulated_response(priv);
}
break;
case RNDIS_SET_MSG:
{
FAR struct rndis_set_msg *req;
FAR struct rndis_response_header *resp;
rndis_prepare_response(priv, sizeof(struct rndis_response_header),
cmd_hdr);
req = (FAR struct rndis_set_msg *)dataout;
resp = (FAR struct rndis_response_header *)priv->ctrlreq->buf;
uinfo("RNDIS SET RID=%08x OID=%08x LEN=%d DAT=%08x",
(unsigned)req->hdr.reqid, (unsigned)req->objid,
(int)req->buflen, (unsigned)req->buffer[0]);
if (req->objid == RNDIS_OID_GEN_CURRENT_PACKET_FILTER)
{
priv->rndis_packet_filter = req->buffer[0];
if (req->buffer[0] == 0)
{
priv->connected = false;
}
else
{
uinfo("RNDIS is now connected");
priv->connected = true;
}
}
else if (req->objid == RNDIS_OID_802_3_MULTICAST_LIST)
{
uinfo("RNDIS multicast list ignored");
}
else
{
uinfo("RNDIS unsupported set %08x", (unsigned)req->objid);
resp->status = RNDIS_STATUS_NOT_SUPPORTED;
}
rndis_send_encapsulated_response(priv);
}
break;
case RNDIS_RESET_MSG:
{
FAR struct rndis_reset_cmplt *resp;
rndis_prepare_response(priv, sizeof(struct rndis_reset_cmplt),
cmd_hdr);
resp = (FAR struct rndis_reset_cmplt *)priv->ctrlreq->buf;
resp->addreset = 0;
priv->connected = false;
rndis_send_encapsulated_response(priv);
}
break;
case RNDIS_KEEPALIVE_MSG:
{
rndis_prepare_response(priv, sizeof(struct rndis_response_header),
cmd_hdr);
rndis_send_encapsulated_response(priv);
}
break;
default:
uwarn("Unsupported RNDIS control message: %u\n", cmd_hdr->msgtype);
}
return OK;
}
/****************************************************************************
* Name: rndis_rdcomplete
*
* Description:
* Handle completion of read request on the bulk OUT endpoint.
*
****************************************************************************/
static void rndis_rdcomplete(FAR struct usbdev_ep_s *ep,
FAR struct usbdev_req_s *req)
{
FAR struct rndis_dev_s *priv;
irqstate_t flags;
int ret;
/* Sanity check */
#ifdef CONFIG_DEBUG_FEATURES
if (!ep || !ep->priv || !req)
{
usbtrace(TRACE_CLSERROR(USBSER_TRACEERR_INVALIDARG), 0);
return;
}
#endif
/* Extract references to private data */
priv = (FAR struct rndis_dev_s *)ep->priv;
/* Process the received data unless this is some unusual condition */
ret = OK;
flags = enter_critical_section();
priv->rdreq_submitted = false;
switch (req->result)
{
case 0: /* Normal completion */
ret = rndis_recvpacket(priv, req->buf, req->xfrd);
DEBUGASSERT(ret != -ENOMEM);
break;
case -ESHUTDOWN: /* Disconnection */
usbtrace(TRACE_CLSERROR(USBSER_TRACEERR_RDSHUTDOWN), 0);
leave_critical_section(flags);
return;
default: /* Some other error occurred */
usbtrace(TRACE_CLSERROR(USBSER_TRACEERR_RDUNEXPECTED), (uint16_t)-req->result);
break;
};
if (ret == OK)
{
rndis_submit_rdreq(priv);
}
leave_critical_section(flags);
}
/****************************************************************************
* Name: rndis_wrcomplete
*
* Description:
* Handle completion of write request. This function probably executes
* in the context of an interrupt handler.
*
****************************************************************************/
static void rndis_wrcomplete(FAR struct usbdev_ep_s *ep,
FAR struct usbdev_req_s *req)
{
FAR struct rndis_dev_s *priv;
FAR struct rndis_req_s *reqcontainer;
irqstate_t flags;
/* Sanity check */
#ifdef CONFIG_DEBUG_FEATURES
if (!ep || !ep->priv || !req || !req->priv)
{
usbtrace(TRACE_CLSERROR(USBSER_TRACEERR_INVALIDARG), 0);
return;
}
#endif
/* Extract references to our private data */
priv = (FAR struct rndis_dev_s *)ep->priv;
reqcontainer = (FAR struct rndis_req_s *)req->priv;
/* Return the write request to the free list */
flags = enter_critical_section();
rndis_freewrreq(priv, reqcontainer);
if (rndis_hasfreereqs(priv))
{
rndis_txavail(&priv->netdev);
}
switch (req->result)
{
case OK: /* Normal completion */
priv->rndis_host_rx_count++;
break;
case -ESHUTDOWN: /* Disconnection */
break;
default: /* Some other error occurred */
usbtrace(TRACE_CLSERROR(USBSER_TRACEERR_WRUNEXPECTED),
(uint16_t)-req->result);
break;
}
leave_critical_section(flags);
}
/****************************************************************************
* Name: usbclass_ep0incomplete
*
* Description:
* Handle completion of EP0 control operations
*
****************************************************************************/
static void usbclass_ep0incomplete(FAR struct usbdev_ep_s *ep,
FAR struct usbdev_req_s *req)
{
if (req->result || req->xfrd != req->len)
{
usbtrace(TRACE_CLSERROR(USBSER_TRACEERR_REQRESULT),
(uint16_t)-req->result);
}
else if (req->len > 0)
{
struct rndis_dev_s *priv = (FAR struct rndis_dev_s *)ep->priv;
priv->ctrlreq_has_encap_response = false;
}
}
/****************************************************************************
* Name: usbclass_ep0incomplete
*
* Description:
* Handle completion of interrupt IN endpoint operations
*
****************************************************************************/
static void usbclass_epintin_complete(FAR struct usbdev_ep_s *ep,
FAR struct usbdev_req_s *req)
{
if (req->result || req->xfrd != req->len)
{
usbtrace(TRACE_CLSERROR(USBSER_TRACEERR_REQRESULT),
(uint16_t)-req->result);
}
}
/****************************************************************************
* Name: usbclass_freereq
*
* Description:
* Free a request instance along with its buffer
*
****************************************************************************/
static void usbclass_freereq(FAR struct usbdev_ep_s *ep,
FAR struct usbdev_req_s *req)
{
if (ep != NULL && req != NULL)
{
if (req->buf != NULL)
{
EP_FREEBUFFER(ep, req->buf);
}
EP_FREEREQ(ep, req);
}
}
/****************************************************************************
* Name: usbclass_allocreq
*
* Description:
* Allocate a request instance along with its buffer
*
****************************************************************************/
static FAR struct usbdev_req_s *usbclass_allocreq(FAR struct usbdev_ep_s *ep,
uint16_t len)
{
FAR struct usbdev_req_s *req;
req = EP_ALLOCREQ(ep);
if (req != NULL)
{
req->len = len;
req->buf = EP_ALLOCBUFFER(ep, len);
if (req->buf == NULL)
{
EP_FREEREQ(ep, req);
req = NULL;
}
}
return req;
}
/****************************************************************************
* Name: usbclass_mkstrdesc
*
* Description:
* Construct a string descriptor
*
****************************************************************************/
static int usbclass_mkstrdesc(uint8_t id, FAR struct usb_strdesc_s *strdesc)
{
FAR const char *str;
int len;
int ndata;
int i;
switch (id)
{
#ifndef CONFIG_RNDIS_COMPOSITE
case 0:
{
/* Descriptor 0 is the language id */
strdesc->len = 4;
strdesc->type = USB_DESC_TYPE_STRING;
strdesc->data[0] = LSBYTE(RNDIS_STR_LANGUAGE);
strdesc->data[1] = MSBYTE(RNDIS_STR_LANGUAGE);
return 4;
}
case RNDIS_MANUFACTURERSTRID:
str = CONFIG_RNDIS_VENDORSTR;
break;
case RNDIS_PRODUCTSTRID:
str = CONFIG_RNDIS_PRODUCTSTR;
break;
case RNDIS_SERIALSTRID:
str = CONFIG_RNDIS_SERIALSTR;
break;
#endif
default:
return -EINVAL;
}
/* The string is utf16-le. The poor man's utf-8 to utf16-le
* conversion below will only handle 7-bit en-us ascii
*/
len = strlen(str);
if (len > (RNDIS_MAXSTRLEN / 2))
{
len = (RNDIS_MAXSTRLEN / 2);
}
for (i = 0, ndata = 0; i < len; i++, ndata += 2)
{
strdesc->data[ndata] = str[i];
strdesc->data[ndata+1] = 0;
}
strdesc->len = ndata+2;
strdesc->type = USB_DESC_TYPE_STRING;
return strdesc->len;
}
/****************************************************************************
* Name: usbclass_copy_epdesc
*
* Description:
* Copies the requested Endpoint Description into the buffer given.
* Returns the number of Bytes filled in ( sizeof(struct usb_epdesc_s) ).
*
****************************************************************************/
static int usbclass_copy_epdesc(int epid, FAR struct usb_epdesc_s *epdesc,
FAR struct usbdev_devinfo_s *devinfo,
bool hispeed)
{
#ifndef CONFIG_USBDEV_DUALSPEED
UNUSED(hispeed);
#endif
switch (epid)
{
case RNDIS_EP_INTIN_IDX: /* Interrupt IN endpoint */
{
epdesc->len = USB_SIZEOF_EPDESC; /* Descriptor length */
epdesc->type = USB_DESC_TYPE_ENDPOINT; /* Descriptor type */
epdesc->addr = RNDIS_MKEPINTIN(devinfo); /* Endpoint address */
epdesc->attr = RNDIS_EPINTIN_ATTR; /* Endpoint attributes */
#ifdef CONFIG_USBDEV_DUALSPEED
if (hispeed)
{
/* Maximum packet size (high speed) */
epdesc->mxpacketsize[0] = LSBYTE(CONFIG_RNDIS_EPINTIN_HSSIZE);
epdesc->mxpacketsize[1] = MSBYTE(CONFIG_RNDIS_EPINTIN_HSSIZE);
}
else
#endif
{
/* Maximum packet size (full speed) */
epdesc->mxpacketsize[0] = LSBYTE(CONFIG_RNDIS_EPINTIN_FSSIZE);
epdesc->mxpacketsize[1] = MSBYTE(CONFIG_RNDIS_EPINTIN_FSSIZE);
}
epdesc->interval = 10; /* Interval */
}
break;
case RNDIS_EP_BULKOUT_IDX: /* Bulk OUT endpoint */
{
epdesc->len = USB_SIZEOF_EPDESC; /* Descriptor length */
epdesc->type = USB_DESC_TYPE_ENDPOINT; /* Descriptor type */
epdesc->addr = RNDIS_MKEPBULKOUT(devinfo); /* Endpoint address */
epdesc->attr = RNDIS_EPOUTBULK_ATTR; /* Endpoint attributes */
#ifdef CONFIG_USBDEV_DUALSPEED
if (hispeed)
{
/* Maximum packet size (high speed) */
epdesc->mxpacketsize[0] = LSBYTE(CONFIG_RNDIS_EPBULKOUT_HSSIZE);
epdesc->mxpacketsize[1] = MSBYTE(CONFIG_RNDIS_EPBULKOUT_HSSIZE);
}
else
#endif
{
/* Maximum packet size (full speed) */
epdesc->mxpacketsize[0] = LSBYTE(CONFIG_RNDIS_EPBULKOUT_FSSIZE);
epdesc->mxpacketsize[1] = MSBYTE(CONFIG_RNDIS_EPBULKOUT_FSSIZE);
}
epdesc->interval = 0; /* Interval */
}
break;
case RNDIS_EP_BULKIN_IDX: /* Bulk IN endpoint */
{
epdesc->len = USB_SIZEOF_EPDESC; /* Descriptor length */
epdesc->type = USB_DESC_TYPE_ENDPOINT; /* Descriptor type */
epdesc->addr = RNDIS_MKEPBULKIN(devinfo); /* Endpoint address */
epdesc->attr = RNDIS_EPINBULK_ATTR; /* Endpoint attributes */
#ifdef CONFIG_USBDEV_DUALSPEED
if (hispeed)
{
/* Maximum packet size (high speed) */
epdesc->mxpacketsize[0] = LSBYTE(CONFIG_RNDIS_EPBULKIN_HSSIZE);
epdesc->mxpacketsize[1] = MSBYTE(CONFIG_RNDIS_EPBULKIN_HSSIZE);
}
else
#endif
{
/* Maximum packet size (full speed) */
epdesc->mxpacketsize[0] = LSBYTE(CONFIG_RNDIS_EPBULKIN_FSSIZE);
epdesc->mxpacketsize[1] = MSBYTE(CONFIG_RNDIS_EPBULKIN_FSSIZE);
}
epdesc->interval = 0; /* Interval */
}
break;
default:
return 0;
}
return sizeof(struct usb_epdesc_s);
}
/****************************************************************************
* Name: usbclass_mkcfgdesc
*
* Description:
* Construct the configuration descriptor
*
****************************************************************************/
static int16_t usbclass_mkcfgdesc(FAR uint8_t *buf,
FAR struct usbdev_devinfo_s *devinfo)
{
FAR struct rndis_cfgdesc_s *dest = (FAR struct rndis_cfgdesc_s *)buf;
uint16_t totallen;
/* This is the total length of the configuration (not necessarily the
* size that we will be sending now).
*/
totallen = sizeof(g_rndis_cfgdesc);
memcpy(dest, &g_rndis_cfgdesc, totallen);
#ifndef CONFIG_RNDIS_COMPOSITE
/* For a stand-alone device, just fill in the total length */
dest->cfgdesc.totallen[0] = LSBYTE(totallen);
dest->cfgdesc.totallen[1] = MSBYTE(totallen);
#else
/* For composite device, apply possible offset to the interface numbers */
dest->assoc_desc.firstif += devinfo->ifnobase;
dest->comm_ifdesc.ifno += devinfo->ifnobase;
dest->epintindesc.addr = USB_EPIN(devinfo->epno[RNDIS_EP_INTIN_IDX]);
dest->data_ifdesc.ifno += devinfo->ifnobase;
dest->epbulkindesc.addr = USB_EPIN(devinfo->epno[RNDIS_EP_BULKIN_IDX]);
dest->epbulkoutdesc.addr = USB_EPOUT(devinfo->epno[RNDIS_EP_BULKOUT_IDX]);
#endif
return totallen;
}
/****************************************************************************
* Name: usbclass_bind
*
* Description:
* Invoked when the driver is bound to a USB device driver
*
****************************************************************************/
static int usbclass_bind(FAR struct usbdevclass_driver_s *driver,
FAR struct usbdev_s *dev)
{
FAR struct rndis_dev_s *priv = ((FAR struct rndis_driver_s *)driver)->dev;
FAR struct rndis_req_s *reqcontainer;
irqstate_t flags;
uint16_t reqlen;
int ret;
int i;
usbtrace(TRACE_CLASSBIND, 0);
/* Bind the structures */
priv->usbdev = dev;
/* Save the reference to our private data structure in EP0 so that it
* can be recovered in ep0 completion events (Unless we are part of
* a composite device and, in that case, the composite device owns
* EP0).
*/
dev->ep0->priv = priv;
/* Preallocate control request */
priv->ctrlreq = usbclass_allocreq(dev->ep0, RNDIS_CTRLREQ_LEN);
if (priv->ctrlreq == NULL)
{
usbtrace(TRACE_CLSERROR(USBSER_TRACEERR_ALLOCCTRLREQ), 0);
ret = -ENOMEM;
goto errout;
}
priv->ctrlreq->callback = usbclass_ep0incomplete;
/* Pre-allocate all endpoints... the endpoints will not be functional
* until the SET CONFIGURATION request is processed in usbclass_setconfig.
* This is done here because there may be calls to kmm_malloc and the SET
* CONFIGURATION processing probably occurs within interrupt handling
* logic where kmm_malloc calls will fail.
*/
/* Pre-allocate the IN interrupt endpoint */
priv->epintin = DEV_ALLOCEP(dev, USB_EPIN(priv->devinfo.epno[RNDIS_EP_INTIN_IDX]),
true, USB_EP_ATTR_XFER_INT);
if (!priv->epintin)
{
usbtrace(TRACE_CLSERROR(USBSER_TRACEERR_EPINTINALLOCFAIL), 0);
ret = -ENODEV;
goto errout;
}
priv->epintin->priv = priv;
priv->epintin_req = usbclass_allocreq(priv->epintin, sizeof(struct rndis_notification));
if (priv->epintin_req == NULL)
{
usbtrace(TRACE_CLSERROR(USBSER_TRACEERR_RDALLOCREQ), -ENOMEM);
ret = -ENOMEM;
goto errout;
}
priv->epintin_req->callback = usbclass_epintin_complete;
/* Pre-allocate the IN bulk endpoint */
priv->epbulkin = DEV_ALLOCEP(dev, USB_EPIN(priv->devinfo.epno[RNDIS_EP_BULKIN_IDX]),
true, USB_EP_ATTR_XFER_BULK);
if (!priv->epbulkin)
{
usbtrace(TRACE_CLSERROR(USBSER_TRACEERR_EPBULKINALLOCFAIL), 0);
ret = -ENODEV;
goto errout;
}
priv->epbulkin->priv = priv;
/* Pre-allocate the OUT bulk endpoint */
priv->epbulkout = DEV_ALLOCEP(dev, USB_EPOUT(priv->devinfo.epno[RNDIS_EP_BULKOUT_IDX]),
false, USB_EP_ATTR_XFER_BULK);
if (!priv->epbulkout)
{
usbtrace(TRACE_CLSERROR(USBSER_TRACEERR_EPBULKOUTALLOCFAIL), 0);
ret = -ENODEV;
goto errout;
}
priv->epbulkout->priv = priv;
/* Pre-allocate read requests. The buffer size is one full packet. */
reqlen = 64;
if (CONFIG_RNDIS_BULKOUT_REQLEN > reqlen)
{
reqlen = CONFIG_RNDIS_BULKOUT_REQLEN;
}
priv->rdreq = usbclass_allocreq(priv->epbulkout, reqlen);
if (priv->rdreq == NULL)
{
usbtrace(TRACE_CLSERROR(USBSER_TRACEERR_RDALLOCREQ), -ENOMEM);
ret = -ENOMEM;
goto errout;
}
priv->rdreq->callback = rndis_rdcomplete;
/* Pre-allocate write request containers and put in a free list.
* The buffer size should be larger than a full packet. Otherwise,
* we will send a bogus null packet at the end of each packet.
*
* Pick the larger of the max packet size and the configured request
* size.
*/
reqlen = 64;
if (CONFIG_RNDIS_BULKIN_REQLEN > reqlen)
{
reqlen = CONFIG_RNDIS_BULKIN_REQLEN;
}
for (i = 0; i < CONFIG_RNDIS_NWRREQS; i++)
{
reqcontainer = &priv->wrreqs[i];
reqcontainer->req = usbclass_allocreq(priv->epbulkin, reqlen);
if (reqcontainer->req == NULL)
{
usbtrace(TRACE_CLSERROR(USBSER_TRACEERR_WRALLOCREQ), -ENOMEM);
ret = -ENOMEM;
goto errout;
}
reqcontainer->req->priv = reqcontainer;
reqcontainer->req->callback = rndis_wrcomplete;
flags = enter_critical_section();
sq_addlast((FAR sq_entry_t *)reqcontainer, &priv->reqlist);
leave_critical_section(flags);
}
/* Report if we are selfpowered */
#ifndef CONFIG_RNDIS_COMPOSITE
#ifdef CONFIG_USBDEV_SELFPOWERED
DEV_SETSELFPOWERED(dev);
#endif
/* And pull-up the data line for the soft connect function */
DEV_CONNECT(dev);
#endif
return OK;
errout:
usbclass_unbind(driver, dev);
return ret;
}
/****************************************************************************
* Name: usbclass_unbind
*
* Description:
* Invoked when the driver is unbound from a USB device driver
*
****************************************************************************/
static void usbclass_unbind(FAR struct usbdevclass_driver_s *driver,
FAR struct usbdev_s *dev)
{
FAR struct rndis_dev_s *priv;
FAR struct rndis_req_s *reqcontainer;
irqstate_t flags;
usbtrace(TRACE_CLASSUNBIND, 0);
#ifdef CONFIG_DEBUG_FEATURES
if (!driver || !dev || !dev->ep0)
{
usbtrace(TRACE_CLSERROR(USBSER_TRACEERR_INVALIDARG), 0);
return;
}
#endif
/* Extract reference to private data */
priv = ((FAR struct rndis_driver_s *)driver)->dev;
#ifdef CONFIG_DEBUG_FEATURES
if (!priv)
{
usbtrace(TRACE_CLSERROR(USBSER_TRACEERR_EP0NOTBOUND), 0);
return;
}
#endif
/* Make sure that we are not already unbound */
if (priv != NULL)
{
/* Make sure that the endpoints have been unconfigured. If
* we were terminated gracefully, then the configuration should
* already have been reset. If not, then calling usbclass_resetconfig
* should cause the endpoints to immediately terminate all
* transfers and return the requests to us (with result == -ESHUTDOWN)
*/
usbclass_resetconfig(priv);
up_mdelay(50);
/* Free the interrupt IN endpoint */
if (priv->epintin)
{
DEV_FREEEP(dev, priv->epintin);
priv->epintin = NULL;
}
/* Free the bulk IN endpoint */
if (priv->epbulkin)
{
DEV_FREEEP(dev, priv->epbulkin);
priv->epbulkin = NULL;
}
/* Free the pre-allocated control request */
if (priv->ctrlreq != NULL)
{
usbclass_freereq(dev->ep0, priv->ctrlreq);
priv->ctrlreq = NULL;
}
if (priv->epintin_req != NULL)
{
usbclass_freereq(priv->epintin, priv->epintin_req);
priv->epintin_req = NULL;
}
/* Free pre-allocated read requests (which should all have
* been returned to the free list at this time -- we don't check)
*/
if (priv->rdreq)
{
usbclass_freereq(priv->epbulkout, priv->rdreq);
}
/* Free the bulk OUT endpoint */
if (priv->epbulkout)
{
DEV_FREEEP(dev, priv->epbulkout);
priv->epbulkout = NULL;
}
netdev_unregister(&priv->netdev);
/* Free write requests that are not in use (which should be all
* of them
*/
flags = enter_critical_section();
while (!sq_empty(&priv->reqlist))
{
reqcontainer = (struct rndis_req_s *)sq_remfirst(&priv->reqlist);
if (reqcontainer->req != NULL)
{
usbclass_freereq(priv->epbulkin, reqcontainer->req);
}
}
leave_critical_section(flags);
}
}
/****************************************************************************
* Name: usbclass_setup
*
* Description:
* Invoked for ep0 control requests. This function probably executes
* in the context of an interrupt handler.
*
****************************************************************************/
static int usbclass_setup(FAR struct usbdevclass_driver_s *driver,
FAR struct usbdev_s *dev,
FAR const struct usb_ctrlreq_s *ctrl,
FAR uint8_t *dataout, size_t outlen)
{
FAR struct rndis_dev_s *priv;
FAR struct usbdev_req_s *ctrlreq;
uint16_t value;
uint16_t len;
int ret = -EOPNOTSUPP;
#ifdef CONFIG_DEBUG_FEATURES
if (!driver || !dev || !dev->ep0 || !ctrl)
{
usbtrace(TRACE_CLSERROR(USBSER_TRACEERR_INVALIDARG), 0);
return -EIO;
}
#endif
/* Extract reference to private data */
usbtrace(TRACE_CLASSSETUP, ctrl->req);
priv = ((FAR struct rndis_driver_s *)driver)->dev;
#ifdef CONFIG_DEBUG_FEATURES
if (!priv || !priv->ctrlreq)
{
usbtrace(TRACE_CLSERROR(USBSER_TRACEERR_EP0NOTBOUND), 0);
return -ENODEV;
}
#endif
ctrlreq = priv->ctrlreq;
/* Extract the little-endian 16-bit values to host order */
value = GETUINT16(ctrl->value);
len = GETUINT16(ctrl->len);
uinfo("type=%02x req=%02x value=%04x len=%04x\n",
ctrl->type, ctrl->req, value, len);
switch (ctrl->type & USB_REQ_TYPE_MASK)
{
/***********************************************************************
* Standard Requests
***********************************************************************/
case USB_REQ_TYPE_STANDARD:
{
switch (ctrl->req)
{
case USB_REQ_GETDESCRIPTOR:
{
/* The value field specifies the descriptor type in the MS byte and the
* descriptor index in the LS byte (order is little endian)
*/
switch (ctrl->value[1])
{
#ifndef CONFIG_RNDIS_COMPOSITE
case USB_DESC_TYPE_DEVICE:
{
ret = USB_SIZEOF_DEVDESC;
memcpy(ctrlreq->buf, &g_devdesc, ret);
}
break;
#endif
case USB_DESC_TYPE_CONFIG:
{
ret = usbclass_mkcfgdesc(ctrlreq->buf, &priv->devinfo);
}
break;
case USB_DESC_TYPE_STRING:
{
/* index == language code. */
ret = usbclass_mkstrdesc(ctrl->value[0],
(FAR struct usb_strdesc_s *)ctrlreq->buf);
}
break;
default:
{
usbtrace(TRACE_CLSERROR(USBSER_TRACEERR_GETUNKNOWNDESC), value);
}
break;
}
}
break;
case USB_REQ_SETCONFIGURATION:
{
if (ctrl->type == 0)
{
ret = usbclass_setconfig(priv, value);
}
}
break;
case USB_REQ_GETCONFIGURATION:
{
if (ctrl->type == USB_DIR_IN)
{
*(FAR uint8_t *)ctrlreq->buf = priv->config;
ret = 1;
}
}
break;
default:
usbtrace(TRACE_CLSERROR(USBSER_TRACEERR_UNSUPPORTEDSTDREQ), ctrl->req);
break;
}
}
break;
/* Class requests */
case USB_REQ_TYPE_CLASS:
{
if ((ctrl->type & USB_REQ_RECIPIENT_MASK) == USB_REQ_RECIPIENT_INTERFACE)
{
if (ctrl->req == RNDIS_SEND_ENCAPSULATED_COMMAND)
{
ret = rndis_handle_control_message(priv, dataout, outlen);
}
else if (ctrl->req == RNDIS_GET_ENCAPSULATED_RESPONSE)
{
if (!priv->ctrlreq_has_encap_response)
{
ret = 1;
ctrlreq->buf[0] = 0;
}
else
{
/* There is data prepared in the ctrlreq buffer.
* Just assign the length.
*/
FAR struct rndis_response_header *hdr =
(struct rndis_response_header *)ctrlreq->buf;
ret = hdr->msglen;
}
}
}
}
break;
default:
usbtrace(TRACE_CLSERROR(USBSER_TRACEERR_UNSUPPORTEDTYPE), ctrl->type);
break;
}
/* Respond to the setup command if data was returned. On an error return
* value (ret < 0), the USB driver will stall.
*/
if (ret >= 0)
{
ctrlreq->len = min(len, ret);
ctrlreq->flags = USBDEV_REQFLAGS_NULLPKT;
ret = EP_SUBMIT(dev->ep0, ctrlreq);
if (ret < 0)
{
usbtrace(TRACE_CLSERROR(USBSER_TRACEERR_EPRESPQ), (uint16_t)-ret);
ctrlreq->result = OK;
usbclass_ep0incomplete(dev->ep0, ctrlreq);
}
}
return ret;
}
/****************************************************************************
* Name: usbclass_disconnect
*
* Description:
* Invoked after all transfers have been stopped, when the host is
* disconnected. This function is probably called from the context of an
* interrupt handler.
*
****************************************************************************/
static void usbclass_disconnect(FAR struct usbdevclass_driver_s *driver,
FAR struct usbdev_s *dev)
{
FAR struct rndis_dev_s *priv;
irqstate_t flags;
usbtrace(TRACE_CLASSDISCONNECT, 0);
#ifdef CONFIG_DEBUG_FEATURES
if (!driver || !dev || !dev->ep0)
{
usbtrace(TRACE_CLSERROR(USBSER_TRACEERR_INVALIDARG), 0);
return;
}
#endif
/* Extract reference to private data */
priv = ((FAR struct rndis_driver_s *)driver)->dev;
#ifdef CONFIG_DEBUG_FEATURES
if (!priv)
{
usbtrace(TRACE_CLSERROR(USBSER_TRACEERR_EP0NOTBOUND), 0);
return;
}
#endif
/* Inform the "upper half" network driver that we have lost the USB
* connection.
*/
priv->netdev.d_ifdown(&priv->netdev);
flags = enter_critical_section();
/* Reset the configuration */
usbclass_resetconfig(priv);
leave_critical_section(flags);
/* Perform the soft connect function so that we will we can be
* re-enumerated.
*/
DEV_CONNECT(dev);
}
/****************************************************************************
* Name: usbclass_resetconfig
*
* Description:
* Mark the device as not configured and disable all endpoints.
*
****************************************************************************/
static void usbclass_resetconfig(FAR struct rndis_dev_s *priv)
{
/* Are we configured? */
if (priv->config != RNDIS_CONFIGIDNONE)
{
/* Yes.. but not anymore */
priv->config = RNDIS_CONFIGIDNONE;
priv->netdev.d_ifdown(&priv->netdev);
/* Disable endpoints. This should force completion of all pending
* transfers.
*/
EP_DISABLE(priv->epintin);
EP_DISABLE(priv->epbulkin);
EP_DISABLE(priv->epbulkout);
}
}
/****************************************************************************
* Name: usbclass_setconfig
*
* Description:
* Set the device configuration by allocating and configuring endpoints and
* by allocating and queue read and write requests.
*
****************************************************************************/
static int usbclass_setconfig(FAR struct rndis_dev_s *priv, uint8_t config)
{
struct usb_epdesc_s epdesc;
bool hispeed = false;
int ret = 0;
#ifdef CONFIG_DEBUG_FEATURES
if (priv == NULL)
{
usbtrace(TRACE_CLSERROR(USBSER_TRACEERR_INVALIDARG), 0);
return -EIO;
}
#endif
#ifdef CONFIG_USBDEV_DUALSPEED
hispeed = (priv->usbdev->speed == USB_SPEED_HIGH);
#endif
if (config == priv->config)
{
/* Already configured -- Do nothing */
usbtrace(TRACE_CLSERROR(USBSER_TRACEERR_ALREADYCONFIGURED), 0);
return 0;
}
/* Discard the previous configuration data */
usbclass_resetconfig(priv);
/* Was this a request to simply discard the current configuration? */
if (config == RNDIS_CONFIGIDNONE)
{
usbtrace(TRACE_CLSERROR(USBSER_TRACEERR_CONFIGNONE), 0);
return 0;
}
/* We only accept one configuration */
if (config != RNDIS_CONFIGID)
{
usbtrace(TRACE_CLSERROR(USBSER_TRACEERR_CONFIGIDBAD), 0);
return -EINVAL;
}
/* Configure the IN interrupt endpoint */
usbclass_copy_epdesc(RNDIS_EP_INTIN_IDX, &epdesc, &priv->devinfo, hispeed);
ret = EP_CONFIGURE(priv->epintin, &epdesc, false);
if (ret < 0)
{
usbtrace(TRACE_CLSERROR(USBSER_TRACEERR_EPINTINCONFIGFAIL), 0);
goto errout;
}
priv->epintin->priv = priv;
/* Configure the IN bulk endpoint */
usbclass_copy_epdesc(RNDIS_EP_BULKIN_IDX, &epdesc, &priv->devinfo, hispeed);
ret = EP_CONFIGURE(priv->epbulkin, &epdesc, false);
if (ret < 0)
{
usbtrace(TRACE_CLSERROR(USBSER_TRACEERR_EPBULKINCONFIGFAIL), 0);
goto errout;
}
priv->epbulkin->priv = priv;
/* Configure the OUT bulk endpoint */
usbclass_copy_epdesc(RNDIS_EP_BULKOUT_IDX, &epdesc, &priv->devinfo, hispeed);
ret = EP_CONFIGURE(priv->epbulkout, &epdesc, true);
if (ret < 0)
{
usbtrace(TRACE_CLSERROR(USBSER_TRACEERR_EPBULKOUTCONFIGFAIL), 0);
goto errout;
}
priv->epbulkout->priv = priv;
/* Queue read requests in the bulk OUT endpoint */
priv->rdreq->callback = rndis_rdcomplete;
ret = rndis_submit_rdreq(priv);
if (ret != OK)
{
usbtrace(TRACE_CLSERROR(USBSER_TRACEERR_RDSUBMIT), (uint16_t)-ret);
goto errout;
}
/* We are successfully configured */
priv->config = config;
if (priv->netdev.d_ifup(&priv->netdev) == OK)
{
priv->netdev.d_flags |= IFF_UP;
}
return OK;
errout:
usbclass_resetconfig(priv);
return ret;
}
/****************************************************************************
* Name: usbclass_classobject
*
* Description:
* Allocate memory for the RNDIS driver class object
*
* Returned Value:
* 0 on success, negative error code on failure.
*
****************************************************************************/
static int usbclass_classobject(int minor,
FAR struct usbdev_devinfo_s *devinfo,
FAR struct usbdevclass_driver_s **classdev)
{
FAR struct rndis_alloc_s *alloc;
FAR struct rndis_dev_s *priv;
FAR struct rndis_driver_s *drvr;
int ret;
/* Allocate the structures needed */
alloc = (FAR struct rndis_alloc_s *)kmm_zalloc(sizeof(struct rndis_alloc_s));
if (!alloc)
{
usbtrace(TRACE_CLSERROR(USBSER_TRACEERR_ALLOCDEVSTRUCT), 0);
return -ENOMEM;
}
/* Convenience pointers into the allocated blob */
priv = &alloc->dev;
drvr = &alloc->drvr;
*classdev = &drvr->drvr;
#ifdef CONFIG_RNDIS_COMPOSITE
priv->devinfo = *devinfo;
#else
priv->devinfo.epno[RNDIS_EP_INTIN_IDX] = USB_EPNO(RNDIS_EPINTIN_ADDR);
priv->devinfo.epno[RNDIS_EP_BULKIN_IDX] = USB_EPNO(RNDIS_EPBULKIN_ADDR);
priv->devinfo.epno[RNDIS_EP_BULKOUT_IDX] = USB_EPNO(RNDIS_EPBULKOUT_ADDR);
#endif
/* Initialize the USB ethernet driver structure */
sq_init(&priv->reqlist);
memcpy(priv->host_mac_address, g_rndis_default_mac_addr, 6);
priv->txpoll = wd_create();
priv->netdev.d_private = priv;
priv->netdev.d_ifup = &rndis_ifup;
priv->netdev.d_ifdown = &rndis_ifdown;
priv->netdev.d_txavail = &rndis_txavail;
/* MAC address filtering is purposefully left out of this driver. Since
* in the RNDIS USB scenario there are only two devices in the network
* (host and us), there shouldn't be any packets received that don't
* belong to us.
*/
/* Initialize the USB class driver structure */
drvr->drvr.speed = USB_SPEED_FULL;
drvr->drvr.ops = &g_driverops;
drvr->dev = priv;
ret = netdev_register(&priv->netdev, NET_LL_ETHERNET);
if (ret)
{
uerr("Failed to register net device");
return ret;
}
drvr->dev->registered = true;
return OK;
}
static void usbclass_uninitialize(FAR struct usbdevclass_driver_s *classdev)
{
FAR struct rndis_driver_s *drvr = (FAR struct rndis_driver_s *)classdev;
FAR struct rndis_alloc_s *alloc = (FAR struct rndis_alloc_s *)drvr->dev;
if (drvr->dev->registered)
{
netdev_unregister(&drvr->dev->netdev);
drvr->dev->registered = false;
}
else
{
kmm_free(alloc);
}
}
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: usbdev_rndis_initialize
*
* Description:
* Initialize the RNDIS USB device driver.
*
* Input Parameters:
* mac_address: pointer to an array of six octets which is the MAC address
* of the host side of the interface. May be NULL to use the
* default MAC address.
*
* Returned Value:
* 0 on success, -errno on failure
*
****************************************************************************/
#ifndef CONFIG_RNDIS_COMPOSITE
int usbdev_rndis_initialize(FAR const uint8_t *mac_address)
{
int ret;
FAR struct usbdevclass_driver_s *classdev;
FAR struct rndis_driver_s *drvr;
ret = usbclass_classobject(0, NULL, &classdev);
if (ret)
{
nerr("usbclass_classobject failed: %d\n", ret);
return ret;
}
drvr = (FAR struct rndis_driver_s *)classdev;
if (mac_address)
{
memcpy(drvr->dev->host_mac_address, mac_address, 6);
}
ret = usbdev_register(&drvr->drvr);
if (ret)
{
nerr("usbdev_register failed: %d\n", ret);
usbtrace(TRACE_CLSERROR(USBSER_TRACEERR_DEVREGISTER), (uint16_t)-ret);
usbclass_uninitialize(classdev);
return ret;
}
return OK;
}
#endif
/****************************************************************************
* Name: usbdev_rndis_set_host_mac_addr
*
* Description:
* Set host MAC address. Mainly for use with composite devices where
* the MAC cannot be given directly to usbdev_rndis_initialize().
*
* Input Parameters:
* netdev: pointer to the network interface. Can be obtained from
* e.g. netdev_findbyname().
*
* mac_address: pointer to an array of six octets which is the MAC address
* of the host side of the interface. May be NULL to use the
* default MAC address.
*
* Returned Value:
* 0 on success, -errno on failure
*
****************************************************************************/
int usbdev_rndis_set_host_mac_addr(FAR struct net_driver_s *netdev,
FAR const uint8_t *mac_address)
{
FAR struct rndis_dev_s *dev = (FAR struct rndis_dev_s *)netdev;
if (mac_address)
{
memcpy(dev->host_mac_address, mac_address, 6);
}
else
{
memcpy(dev->host_mac_address, g_rndis_default_mac_addr, 6);
}
return OK;
}
/****************************************************************************
* Name: usbdev_rndis_get_composite_devdesc
*
* Description:
* Helper function to fill in some constants into the composite
* configuration struct.
*
* Input Parameters:
* dev - Pointer to the configuration struct we should fill
*
* Returned Value:
* None
*
****************************************************************************/
#ifdef CONFIG_RNDIS_COMPOSITE
void usbdev_rndis_get_composite_devdesc(struct composite_devdesc_s *dev)
{
memset(dev, 0, sizeof(struct composite_devdesc_s));
dev->mkconfdesc = usbclass_mkcfgdesc;
dev->mkstrdesc = usbclass_mkstrdesc;
dev->classobject = usbclass_classobject;
dev->uninitialize = usbclass_uninitialize;
dev->nconfigs = RNDIS_NCONFIGS;
dev->configid = RNDIS_CONFIGID;
dev->cfgdescsize = sizeof(g_rndis_cfgdesc);
dev->devinfo.ninterfaces = RNDIS_NINTERFACES;
dev->devinfo.nstrings = 0;
dev->devinfo.nendpoints = RNDIS_NUM_EPS;
/* Default endpoint indexes, board-specific logic can override these */
dev->devinfo.epno[RNDIS_EP_INTIN_IDX] = USB_EPNO(RNDIS_EPINTIN_ADDR);
dev->devinfo.epno[RNDIS_EP_BULKIN_IDX] = USB_EPNO(RNDIS_EPBULKIN_ADDR);
dev->devinfo.epno[RNDIS_EP_BULKOUT_IDX] = USB_EPNO(RNDIS_EPBULKOUT_ADDR);
}
#endif
Reference in New Issue View Git Blame Copy Permalink