460 lines
16 KiB
C
460 lines
16 KiB
C
/*****************************************************************************
|
|
*
|
|
* netapp.c - CC3000 Host Driver Implementation.
|
|
* Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
*
|
|
* Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
*
|
|
* Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the
|
|
* distribution.
|
|
*
|
|
* Neither the name of Texas Instruments Incorporated nor the names of
|
|
* its contributors may be used to endorse or promote products derived
|
|
* from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
|
|
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
|
|
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
|
|
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
|
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
|
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
*****************************************************************************/
|
|
#include <string.h>
|
|
#include <nuttx/cc3000/netapp.h>
|
|
#include <nuttx/cc3000/hci.h>
|
|
#include <nuttx/cc3000/socket.h>
|
|
#include <nuttx/cc3000/evnt_handler.h>
|
|
#include <nuttx/cc3000/nvmem.h>
|
|
|
|
#define MIN_TIMER_VAL_SECONDS 20
|
|
#define MIN_TIMER_SET(t) if ((0 != t) && (t < MIN_TIMER_VAL_SECONDS)) \
|
|
{ \
|
|
t = MIN_TIMER_VAL_SECONDS; \
|
|
}
|
|
|
|
|
|
#define NETAPP_DHCP_PARAMS_LEN (20)
|
|
#define NETAPP_SET_TIMER_PARAMS_LEN (20)
|
|
#define NETAPP_SET_DEBUG_LEVEL_PARAMS_LEN (4)
|
|
#define NETAPP_PING_SEND_PARAMS_LEN (16)
|
|
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! netapp_config_mac_adrress
|
|
//!
|
|
//! @param mac device mac address, 6 bytes. Saved: yes
|
|
//!
|
|
//! @return return on success 0, otherwise error.
|
|
//!
|
|
//! @brief Configure device MAC address and store it in NVMEM.
|
|
//! The value of the MAC address configured through the API will
|
|
//! be stored in CC3000 non volatile memory, thus preserved
|
|
//! over resets.
|
|
//
|
|
//*****************************************************************************
|
|
long netapp_config_mac_adrress(unsigned char * mac)
|
|
{
|
|
return nvmem_set_mac_address(mac);
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! netapp_dhcp
|
|
//!
|
|
//! @param aucIP device mac address, 6 bytes. Saved: yes
|
|
//! @param aucSubnetMask device mac address, 6 bytes. Saved: yes
|
|
//! @param aucDefaultGateway device mac address, 6 bytes. Saved: yes
|
|
//! @param aucDNSServer device mac address, 6 bytes. Saved: yes
|
|
//!
|
|
//! @return return on success 0, otherwise error.
|
|
//!
|
|
//! @brief netapp_dhcp is used to configure the network interface,
|
|
//! static or dynamic (DHCP).\n In order to activate DHCP mode,
|
|
//! aucIP, aucSubnetMask, aucDefaultGateway must be 0.
|
|
//! The default mode of CC3000 is DHCP mode.
|
|
//! Note that the configuration is saved in non volatile memory
|
|
//! and thus preserved over resets.
|
|
//!
|
|
//! @note If the mode is altered a reset of CC3000 device is required
|
|
//! in order to apply changes.\nAlso note that asynchronous event
|
|
//! of DHCP_EVENT, which is generated when an IP address is
|
|
//! allocated either by the DHCP server or due to static
|
|
//! allocation is generated only upon a connection to the
|
|
//! AP was established.
|
|
//!
|
|
//*****************************************************************************
|
|
long netapp_dhcp(unsigned long *aucIP, unsigned long *aucSubnetMask,unsigned long *aucDefaultGateway, unsigned long *aucDNSServer)
|
|
{
|
|
signed char scRet;
|
|
unsigned char *ptr;
|
|
unsigned char *args;
|
|
|
|
scRet = EFAIL;
|
|
ptr = tSLInformation.pucTxCommandBuffer;
|
|
args = (ptr + HEADERS_SIZE_CMD);
|
|
|
|
// Fill in temporary command buffer
|
|
ARRAY_TO_STREAM(args,aucIP,4);
|
|
ARRAY_TO_STREAM(args,aucSubnetMask,4);
|
|
ARRAY_TO_STREAM(args,aucDefaultGateway,4);
|
|
args = UINT32_TO_STREAM(args, 0);
|
|
ARRAY_TO_STREAM(args,aucDNSServer,4);
|
|
|
|
// Initiate a HCI command
|
|
hci_command_send(HCI_NETAPP_DHCP, ptr, NETAPP_DHCP_PARAMS_LEN);
|
|
|
|
// Wait for command complete event
|
|
SimpleLinkWaitEvent(HCI_NETAPP_DHCP, &scRet);
|
|
|
|
return(scRet);
|
|
}
|
|
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! netapp_timeout_values
|
|
//!
|
|
//! @param aucDHCP DHCP lease time request, also impact
|
|
//! the DHCP renew timeout. Range: [0-0xffffffff] seconds,
|
|
//! 0 or 0xffffffff == infinity lease timeout.
|
|
//! Resolution:10 seconds. Influence: only after
|
|
//! reconnecting to the AP.
|
|
//! Minimal bound value: MIN_TIMER_VAL_SECONDS - 20 seconds.
|
|
//! The parameter is saved into the CC3000 NVMEM.
|
|
//! The default value on CC3000 is 14400 seconds.
|
|
//!
|
|
//! @param aucARP ARP refresh timeout, if ARP entry is not updated by
|
|
//! incoming packet, the ARP entry will be deleted by
|
|
//! the end of the timeout.
|
|
//! Range: [0-0xffffffff] seconds, 0 == infinity ARP timeout
|
|
//! Resolution: 10 seconds. Influence: on runtime.
|
|
//! Minimal bound value: MIN_TIMER_VAL_SECONDS - 20 seconds
|
|
//! The parameter is saved into the CC3000 NVMEM.
|
|
//! The default value on CC3000 is 3600 seconds.
|
|
//!
|
|
//! @param aucKeepalive Keepalive event sent by the end of keepalive timeout
|
|
//! Range: [0-0xffffffff] seconds, 0 == infinity timeout
|
|
//! Resolution: 10 seconds.
|
|
//! Influence: on runtime.
|
|
//! Minimal bound value: MIN_TIMER_VAL_SECONDS - 20 sec
|
|
//! The parameter is saved into the CC3000 NVMEM.
|
|
//! The default value on CC3000 is 10 seconds.
|
|
//!
|
|
//! @param aucInactivity Socket inactivity timeout, socket timeout is
|
|
//! refreshed by incoming or outgoing packet, by the
|
|
//! end of the socket timeout the socket will be closed
|
|
//! Range: [0-0xffffffff] sec, 0 == infinity timeout.
|
|
//! Resolution: 10 seconds. Influence: on runtime.
|
|
//! Minimal bound value: MIN_TIMER_VAL_SECONDS - 20 sec
|
|
//! The parameter is saved into the CC3000 NVMEM.
|
|
//! The default value on CC3000 is 60 seconds.
|
|
//!
|
|
//! @return return on success 0, otherwise error.
|
|
//!
|
|
//! @brief Set new timeout values. Function set new timeout values for:
|
|
//! DHCP lease timeout, ARP refresh timeout, keepalive event
|
|
//! timeout and socket inactivity timeout
|
|
//!
|
|
//! @note If a parameter set to non zero value which is less than 20s,
|
|
//! it will be set automatically to 20s.
|
|
//!
|
|
//*****************************************************************************
|
|
|
|
#ifndef CC3000_TINY_DRIVER
|
|
long
|
|
netapp_timeout_values(unsigned long *aucDHCP, unsigned long *aucARP,unsigned long *aucKeepalive, unsigned long *aucInactivity)
|
|
{
|
|
signed char scRet;
|
|
unsigned char *ptr;
|
|
unsigned char *args;
|
|
|
|
scRet = EFAIL;
|
|
ptr = tSLInformation.pucTxCommandBuffer;
|
|
args = (ptr + HEADERS_SIZE_CMD);
|
|
|
|
// Set minimal values of timers
|
|
MIN_TIMER_SET(*aucDHCP)
|
|
MIN_TIMER_SET(*aucARP)
|
|
MIN_TIMER_SET(*aucKeepalive)
|
|
MIN_TIMER_SET(*aucInactivity)
|
|
|
|
// Fill in temporary command buffer
|
|
args = UINT32_TO_STREAM(args, *aucDHCP);
|
|
args = UINT32_TO_STREAM(args, *aucARP);
|
|
args = UINT32_TO_STREAM(args, *aucKeepalive);
|
|
args = UINT32_TO_STREAM(args, *aucInactivity);
|
|
|
|
// Initiate a HCI command
|
|
hci_command_send(HCI_NETAPP_SET_TIMERS, ptr, NETAPP_SET_TIMER_PARAMS_LEN);
|
|
|
|
// Wait for command complete event
|
|
SimpleLinkWaitEvent(HCI_NETAPP_SET_TIMERS, &scRet);
|
|
|
|
return(scRet);
|
|
}
|
|
#endif
|
|
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! netapp_ping_send
|
|
//!
|
|
//! @param ip destination IP address
|
|
//! @param pingAttempts number of echo requests to send
|
|
//! @param pingSize send buffer size which may be up to 1400 bytes
|
|
//! @param pingTimeout Time to wait for a response,in milliseconds.
|
|
//!
|
|
//! @return return on success 0, otherwise error.
|
|
//!
|
|
//! @brief send ICMP ECHO_REQUEST to network hosts
|
|
//!
|
|
//! @note If an operation finished successfully asynchronous ping report
|
|
//! event will be generated. The report structure is as defined
|
|
//! by structure netapp_pingreport_args_t.
|
|
//!
|
|
//! @warning Calling this function while a previous Ping Requests are in
|
|
//! progress will stop the previous ping request.
|
|
//*****************************************************************************
|
|
|
|
#ifndef CC3000_TINY_DRIVER
|
|
long
|
|
netapp_ping_send(unsigned long *ip, unsigned long ulPingAttempts, unsigned long ulPingSize, unsigned long ulPingTimeout)
|
|
{
|
|
signed char scRet;
|
|
unsigned char *ptr, *args;
|
|
|
|
scRet = EFAIL;
|
|
ptr = tSLInformation.pucTxCommandBuffer;
|
|
args = (ptr + HEADERS_SIZE_CMD);
|
|
|
|
// Fill in temporary command buffer
|
|
args = UINT32_TO_STREAM(args, *ip);
|
|
args = UINT32_TO_STREAM(args, ulPingAttempts);
|
|
args = UINT32_TO_STREAM(args, ulPingSize);
|
|
args = UINT32_TO_STREAM(args, ulPingTimeout);
|
|
|
|
// Initiate a HCI command
|
|
hci_command_send(HCI_NETAPP_PING_SEND, ptr, NETAPP_PING_SEND_PARAMS_LEN);
|
|
|
|
// Wait for command complete event
|
|
SimpleLinkWaitEvent(HCI_NETAPP_PING_SEND, &scRet);
|
|
|
|
return(scRet);
|
|
}
|
|
#endif
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! netapp_ping_report
|
|
//!
|
|
//! @param none
|
|
//!
|
|
//! @return none
|
|
//!
|
|
//! @brief Request for ping status. This API triggers the CC3000 to send
|
|
//! asynchronous events: HCI_EVNT_WLAN_ASYNC_PING_REPORT.
|
|
//! This event will carry the report structure:
|
|
//! netapp_pingreport_args_t. This structure is filled in with ping
|
|
//! results up till point of triggering API.
|
|
//! netapp_pingreport_args_t:\n packets_sent - echo sent,
|
|
//! packets_received - echo reply, min_round_time - minimum
|
|
//! round time, max_round_time - max round time,
|
|
//! avg_round_time - average round time
|
|
//!
|
|
//! @note When a ping operation is not active, the returned structure
|
|
//! fields are 0.
|
|
//!
|
|
//*****************************************************************************
|
|
|
|
|
|
#ifndef CC3000_TINY_DRIVER
|
|
void netapp_ping_report(void)
|
|
{
|
|
unsigned char *ptr;
|
|
ptr = tSLInformation.pucTxCommandBuffer;
|
|
signed char scRet;
|
|
|
|
scRet = EFAIL;
|
|
|
|
// Initiate a HCI command
|
|
hci_command_send(HCI_NETAPP_PING_REPORT, ptr, 0);
|
|
|
|
// Wait for command complete event
|
|
SimpleLinkWaitEvent(HCI_NETAPP_PING_REPORT, &scRet);
|
|
}
|
|
#endif
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! netapp_ping_stop
|
|
//!
|
|
//! @param none
|
|
//!
|
|
//! @return On success, zero is returned. On error, -1 is returned.
|
|
//!
|
|
//! @brief Stop any ping request.
|
|
//!
|
|
//!
|
|
//*****************************************************************************
|
|
|
|
#ifndef CC3000_TINY_DRIVER
|
|
long netapp_ping_stop(void)
|
|
{
|
|
signed char scRet;
|
|
unsigned char *ptr;
|
|
|
|
scRet = EFAIL;
|
|
ptr = tSLInformation.pucTxCommandBuffer;
|
|
|
|
// Initiate a HCI command
|
|
hci_command_send(HCI_NETAPP_PING_STOP, ptr, 0);
|
|
|
|
// Wait for command complete event
|
|
SimpleLinkWaitEvent(HCI_NETAPP_PING_STOP, &scRet);
|
|
|
|
return(scRet);
|
|
}
|
|
#endif
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! netapp_ipconfig
|
|
//!
|
|
//! @param[out] ipconfig This argument is a pointer to a
|
|
//! tNetappIpconfigRetArgs structure. This structure is
|
|
//! filled in with the network interface configuration.
|
|
//! tNetappIpconfigRetArgs:\n aucIP - ip address,
|
|
//! aucSubnetMask - mask, aucDefaultGateway - default
|
|
//! gateway address, aucDHCPServer - dhcp server address
|
|
//! aucDNSServer - dns server address, uaMacAddr - mac
|
|
//! address, uaSSID - connected AP ssid
|
|
//!
|
|
//! @return none
|
|
//!
|
|
//! @brief Obtain the CC3000 Network interface information.
|
|
//! Note that the information is available only after the WLAN
|
|
//! connection was established. Calling this function before
|
|
//! associated, will cause non-defined values to be returned.
|
|
//!
|
|
//! @note The function is useful for figuring out the IP Configuration of
|
|
//! the device when DHCP is used and for figuring out the SSID of
|
|
//! the Wireless network the device is associated with.
|
|
//!
|
|
//*****************************************************************************
|
|
|
|
#ifndef CC3000_TINY_DRIVER
|
|
void netapp_ipconfig( tNetappIpconfigRetArgs * ipconfig )
|
|
{
|
|
unsigned char *ptr;
|
|
|
|
ptr = tSLInformation.pucTxCommandBuffer;
|
|
|
|
// Initiate a HCI command
|
|
hci_command_send(HCI_NETAPP_IPCONFIG, ptr, 0);
|
|
|
|
// Wait for command complete event
|
|
SimpleLinkWaitEvent(HCI_NETAPP_IPCONFIG, ipconfig );
|
|
|
|
}
|
|
#else
|
|
void netapp_ipconfig( tNetappIpconfigRetArgs * ipconfig )
|
|
{
|
|
|
|
}
|
|
#endif
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! netapp_arp_flush
|
|
//!
|
|
//! @param none
|
|
//!
|
|
//! @return none
|
|
//!
|
|
//! @brief Flushes ARP table
|
|
//!
|
|
//*****************************************************************************
|
|
|
|
#ifndef CC3000_TINY_DRIVER
|
|
long netapp_arp_flush(void)
|
|
{
|
|
signed char scRet;
|
|
unsigned char *ptr;
|
|
|
|
scRet = EFAIL;
|
|
ptr = tSLInformation.pucTxCommandBuffer;
|
|
|
|
// Initiate a HCI command
|
|
hci_command_send(HCI_NETAPP_ARP_FLUSH, ptr, 0);
|
|
|
|
// Wait for command complete event
|
|
SimpleLinkWaitEvent(HCI_NETAPP_ARP_FLUSH, &scRet);
|
|
|
|
return(scRet);
|
|
}
|
|
#endif
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! netapp_set_debug_level
|
|
//!
|
|
//! @param[in] level debug level. Bitwise [0-8],
|
|
//! 0(disable)or 1(enable).\n Bitwise map: 0 - Critical
|
|
//! message, 1 information message, 2 - core messages, 3 -
|
|
//! HCI messages, 4 - Network stack messages, 5 - wlan
|
|
//! messages, 6 - wlan driver messages, 7 - epprom messages,
|
|
//! 8 - general messages. Default: 0x13f. Saved: no
|
|
//!
|
|
//! @return On success, zero is returned. On error, -1 is returned
|
|
//!
|
|
//! @brief Debug messages sent via the UART debug channel, this function
|
|
//! enable/disable the debug level
|
|
//!
|
|
//*****************************************************************************
|
|
|
|
|
|
#ifndef CC3000_TINY_DRIVER
|
|
long netapp_set_debug_level(unsigned long ulLevel)
|
|
{
|
|
signed char scRet;
|
|
unsigned char *ptr, *args;
|
|
|
|
scRet = EFAIL;
|
|
ptr = tSLInformation.pucTxCommandBuffer;
|
|
args = (ptr + HEADERS_SIZE_CMD);
|
|
|
|
//
|
|
// Fill in temporary command buffer
|
|
//
|
|
args = UINT32_TO_STREAM(args, ulLevel);
|
|
|
|
|
|
//
|
|
// Initiate a HCI command
|
|
//
|
|
hci_command_send(HCI_NETAPP_SET_DEBUG_LEVEL, ptr, NETAPP_SET_DEBUG_LEVEL_PARAMS_LEN);
|
|
|
|
//
|
|
// Wait for command complete event
|
|
//
|
|
SimpleLinkWaitEvent(HCI_NETAPP_SET_DEBUG_LEVEL, &scRet);
|
|
|
|
return(scRet);
|
|
|
|
}
|
|
#endif
|