593 lines
18 KiB
C
593 lines
18 KiB
C
/****************************************************************************
|
|
* arch/arm/src/include/stm32/ltdc.h
|
|
*
|
|
* Copyright (C) 2014-2015 Marco Krahl. All rights reserved.
|
|
* Author: Marco Krahl <ocram.lhark@gmail.com>
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
*
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in
|
|
* the documentation and/or other materials provided with the
|
|
* distribution.
|
|
* 3. Neither the name NuttX nor the names of its contributors may be
|
|
* used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
|
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
|
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
|
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
|
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
|
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
|
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
* POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
****************************************************************************/
|
|
|
|
#ifndef __ARCH_ARM_INCLUDE_STM32_LTDC_H
|
|
#define __ARCH_ARM_INCLUDE_STM32_LTDC_H
|
|
|
|
/****************************************************************************
|
|
* Included Files
|
|
****************************************************************************/
|
|
|
|
#include <nuttx/config.h>
|
|
#include <stdbool.h>
|
|
#include <nuttx/video/fb.h>
|
|
|
|
#ifdef CONFIG_STM32_LTDC
|
|
/****************************************************************************
|
|
* Pre-processor Definitions
|
|
****************************************************************************/
|
|
|
|
/****************************************************************************
|
|
* Public Types
|
|
****************************************************************************/
|
|
|
|
struct dma2d_layer_s; /* see arch/chip/dma2d.h */
|
|
|
|
/* Blend mode definitions */
|
|
|
|
enum ltdc_blend_e
|
|
{
|
|
LTDC_BLEND_NONE = 0, /* Disable all blend operation */
|
|
LTDC_BLEND_ALPHA = 0x1, /* Enable alpha blending */
|
|
LTDC_BLEND_PIXELALPHA = 0x2, /* Enable alpha blending from pixel color */
|
|
LTDC_BLEND_COLORKEY = 0x4, /* Enable colorkey */
|
|
LTDC_BLEND_ALPHAINV = 0x8, /* Inverse alpha blending of source */
|
|
LTDC_BLEND_PIXELALPHAINV = 0x10 /* Invers pixel alpha blending of source */
|
|
};
|
|
|
|
/* layer control definitions */
|
|
|
|
enum ltdc_layer_e
|
|
{
|
|
LTDC_LAYER_OWN = 0, /* The given layer */
|
|
LTDC_LAYER_TOP = 0x1, /* The initialized top layer */
|
|
LTDC_LAYER_BOTTOM = 0x2, /* the initialized bottom layer */
|
|
LTDC_LAYER_ACTIVE = 0x4, /* The current visible flip layer */
|
|
LTDC_LAYER_INACTIVE = 0x8 /* The current invisible flip layer */
|
|
#ifdef CONFIG_STM32_DMA2D
|
|
,LTDC_LAYER_DMA2D = 0x10 /* The dma2d interface layer id */
|
|
#endif
|
|
};
|
|
|
|
/* Update operation flag */
|
|
|
|
enum ltdc_update_e
|
|
{
|
|
LTDC_UPDATE_NONE = 0, /* Update given layer only */
|
|
LTDC_UPDATE_SIM = 0x1, /* Update both layer simultaneous */
|
|
LTDC_UPDATE_FLIP = 0x2, /* Perform flip operation */
|
|
LTDC_UPDATE_ACTIVATE = 0x4 /* Set the given layer to the active layer */
|
|
};
|
|
|
|
/* sync mode definitions */
|
|
|
|
enum ltdc_sync_e
|
|
{
|
|
LTDC_SYNC_NONE = 0, /* Immediately */
|
|
LTDC_SYNC_VBLANK = 0x100, /* Upon vertical sync */
|
|
LTDC_SYNC_WAIT = 0x200 /* Waits upon vertical sync */
|
|
};
|
|
|
|
/* Definition of the visible layer position and size */
|
|
|
|
struct ltdc_area_s
|
|
{
|
|
fb_coord_t xpos; /* X position in pixel */
|
|
fb_coord_t ypos; /* Y position in pixel */
|
|
fb_coord_t xres; /* X resolution in pixel */
|
|
fb_coord_t yres; /* Y resolution in pixel */
|
|
};
|
|
|
|
/* The layer is controlled through the following structure */
|
|
|
|
struct ltdc_layer_s
|
|
{
|
|
|
|
/*
|
|
* Name: getvideoinfo
|
|
*
|
|
* Description:
|
|
* Get video information about the layer
|
|
*
|
|
* Parameter:
|
|
* layer - Reference to the layer control structure
|
|
* vinfo - Reference to the video info structure
|
|
*
|
|
* Return:
|
|
* On success - OK
|
|
* On error - -EINVAL
|
|
*
|
|
*/
|
|
int (*getvideoinfo)(FAR struct ltdc_layer_s *layer,
|
|
FAR struct fb_videoinfo_s *vinfo);
|
|
|
|
/*
|
|
* Name: getplaneinfo
|
|
*
|
|
* Description:
|
|
* Get plane information about the layer
|
|
*
|
|
* Parameter:
|
|
* layer - Reference to the layer control structure
|
|
* planeno - Number of the plane
|
|
* pinfo - Reference to the plane info structure
|
|
*
|
|
* Return:
|
|
* On success - OK
|
|
* On error - -EINVAL
|
|
*
|
|
*/
|
|
int (*getplaneinfo)(FAR struct ltdc_layer_s *layer, int planeno,
|
|
FAR struct fb_planeinfo_s *pinfo);
|
|
|
|
/*
|
|
* Name: getlid
|
|
*
|
|
* Description:
|
|
* Get a specific layer identifier.
|
|
*
|
|
* Parameter:
|
|
* layer - Reference to the layer structure
|
|
* lid - Reference to store the layer id
|
|
* flag - Operation flag describe the layer identifier
|
|
* e.g. get the current active or inactive layer.
|
|
* See LTDC_LAYER_* for possible values
|
|
*
|
|
* Return:
|
|
* On success - OK
|
|
* On error - -EINVAL
|
|
*
|
|
*/
|
|
int (*getlid)(FAR struct ltdc_layer_s *layer, int *lid, uint32_t flag);
|
|
|
|
#ifdef CONFIG_FB_CMAP
|
|
/*
|
|
* Name: setclut
|
|
*
|
|
* Description:
|
|
* Configure layer clut (color lookup table).
|
|
* Non clut is defined during initializing.
|
|
* Clut is active during next vertical blank period. Do not need an update.
|
|
*
|
|
* Parameter:
|
|
* layer - Reference to the layer structure
|
|
* cmap - color lookup table with up the 256 entries
|
|
* enable - Enable or disable clut support (if false cmap is ignored and can
|
|
* be NULL)
|
|
*
|
|
* Return:
|
|
* On success - OK
|
|
* On error - -EINVAL
|
|
*
|
|
*/
|
|
int (*setclut)(FAR struct ltdc_layer_s *layer,
|
|
const FAR struct fb_cmap_s *cmap);
|
|
|
|
/*
|
|
* Name: getclut
|
|
*
|
|
* Description:
|
|
* Get configured layer clut (color lookup table).
|
|
*
|
|
* Parameter:
|
|
* layer - Reference to the layer structure
|
|
* cmap - Reference to valid color lookup table accept up the 256 color
|
|
* entries
|
|
*
|
|
* Return:
|
|
* On success - OK
|
|
* On error - -EINVAL
|
|
*
|
|
*/
|
|
int (*getclut)(FAR struct ltdc_layer_s *layer, FAR struct fb_cmap_s *cmap);
|
|
#endif
|
|
|
|
/*
|
|
* Name: setcolor
|
|
*
|
|
* Description:
|
|
* Configure layer color for the non active layer area.
|
|
* Default value during initializing: 0x00000000
|
|
* Color is active after next update.
|
|
*
|
|
* Parameter:
|
|
* layer - Reference to the layer structure
|
|
* argb - ARGB8888 color value
|
|
*
|
|
* Return:
|
|
* On success - OK
|
|
* On error - -EINVAL
|
|
*
|
|
*/
|
|
int (*setcolor)(FAR struct ltdc_layer_s *layer, uint32_t argb);
|
|
|
|
/*
|
|
* Name: getcolor
|
|
*
|
|
* Description:
|
|
* Get configured layer color for the non active layer area.
|
|
*
|
|
* Parameter:
|
|
* layer - Reference to the layer structure
|
|
* argb - Reference to store the ARGB8888 color value
|
|
*
|
|
* Return:
|
|
* On success - OK
|
|
* On error - -EINVAL
|
|
*
|
|
*/
|
|
int (*getcolor)(FAR struct ltdc_layer_s *layer, uint32_t *argb);
|
|
|
|
/*
|
|
* Name: setcolorkey
|
|
*
|
|
* Description:
|
|
* Configure the layer color key (chromakey) for transparence.
|
|
* Default value during initializing: 0x00000000
|
|
* Colorkey is active after next update.
|
|
*
|
|
* Parameter:
|
|
* layer - Reference to the layer structure
|
|
* rgb - RGB888 color key
|
|
*
|
|
* Return:
|
|
* On success - OK
|
|
* On error - -EINVAL
|
|
*
|
|
*/
|
|
int (*setcolorkey)(FAR struct ltdc_layer_s *layer, uint32_t rgb);
|
|
|
|
/*
|
|
* Name: getcolorkey
|
|
*
|
|
* Description:
|
|
* Get the configured layer color key (chromakey) for transparence.
|
|
*
|
|
* Parameter:
|
|
* layer - Reference to the layer structure
|
|
* rgb - Reference to store the RGB888 color key
|
|
*
|
|
* Return:
|
|
* On success - OK
|
|
* On error - -EINVAL
|
|
*
|
|
*/
|
|
int (*getcolorkey)(FAR struct ltdc_layer_s *layer, uint32_t *rgb);
|
|
|
|
/*
|
|
* Name: setalpha
|
|
*
|
|
* Description:
|
|
* Configure layer alpha value factor into blend operation.
|
|
* During the layer blend operation the source alpha value is multiplied
|
|
* with this alpha value. If the source color format doesn't support alpha
|
|
* channel (e.g. non ARGB8888) this alpha value will be used as constant
|
|
* alpha value for blend operation.
|
|
* Default value during initializing: 0xff
|
|
* Alpha is active after next update.
|
|
*
|
|
* Parameter:
|
|
* layer - Reference to the layer structure
|
|
* alpha - Alpha value
|
|
*
|
|
* Return:
|
|
* On success - OK
|
|
* On error - -EINVAL
|
|
*
|
|
*/
|
|
int (*setalpha)(FAR struct ltdc_layer_s *layer, uint8_t alpha);
|
|
|
|
/*
|
|
* Name: getalpha
|
|
*
|
|
* Description:
|
|
* Get configured layer alpha value factor for blend operation.
|
|
*
|
|
* Parameter:
|
|
* layer - Reference to the layer structure
|
|
* alpha - Reference to store the alpha value
|
|
*
|
|
* Return:
|
|
* On success - OK
|
|
* On error - -EINVAL
|
|
*
|
|
*/
|
|
int (*getalpha)(FAR struct ltdc_layer_s *layer, uint8_t *alpha);
|
|
|
|
/*
|
|
* Name: setblendmode
|
|
*
|
|
* Description:
|
|
* Configure blend mode of the layer.
|
|
* Default mode during initializing: LTDC_BLEND_NONE
|
|
* Blendmode is active after next update.
|
|
*
|
|
* Parameter:
|
|
* layer - Reference to the layer structure
|
|
* mode - Blend mode (see LTDC_BLEND_*)
|
|
*
|
|
* Return:
|
|
* On success - OK
|
|
* On error - -EINVAL
|
|
*
|
|
* Procedure information:
|
|
* LTDC_BLEND_NONE:
|
|
* Informs the driver to disable all blend operation for the given layer.
|
|
* That means the layer is opaque. Note this has no effect on the
|
|
* colorkey settings.
|
|
*
|
|
* LTDC_BLEND_ALPHA:
|
|
* Informs the driver to enable alpha blending for the given layer.
|
|
*
|
|
* LTDC_BLEND_COLORKEY:
|
|
* Informs the driver to enable colorkeying for the given layer.
|
|
*
|
|
* LTDC_BLEND_SRCPIXELALPHA:
|
|
* Informs the driver to use the pixel alpha value of the layer instead
|
|
* the constant alpha value. This is only useful for ARGB8888
|
|
* color format.
|
|
*
|
|
* LTDC_BLEND_DESTPIXELALPHA:
|
|
* Informs the driver to use the pixel alpha value of the subjacent layer
|
|
* instead the constant alpha value. This is only useful for ARGB8888
|
|
* color format.
|
|
*
|
|
*/
|
|
int (*setblendmode)(FAR struct ltdc_layer_s *layer, uint32_t mode);
|
|
|
|
/*
|
|
* Name: getblendmode
|
|
*
|
|
* Description:
|
|
* Get configured blend mode of the layer.
|
|
*
|
|
* Parameter:
|
|
* layer - Reference to the layer structure
|
|
* mode - Reference to store the blend mode
|
|
*
|
|
* Return:
|
|
* On success - OK
|
|
* On error - -EINVAL
|
|
*
|
|
*/
|
|
int (*getblendmode)(FAR struct ltdc_layer_s *layer, uint32_t *mode);
|
|
|
|
/*
|
|
* Name: setarea
|
|
*
|
|
* Description:
|
|
* Configure visible layer area and the reference position of the first
|
|
* pixel of the whole layer which is the first visible top left pixel in
|
|
* the active area.
|
|
* Default value during initializing:
|
|
* xpos = 0
|
|
* ypos = 0
|
|
* xres = display x resolution
|
|
* yres = display y resolution
|
|
*
|
|
* Area is active after next update.
|
|
*
|
|
* Parameter:
|
|
* layer - Reference to the layer control structure
|
|
* area - Reference to the valid area structure for the new active area
|
|
* srcxpos - x position of the visible pixel of the whole layer
|
|
* srcypos - y position of the visible pixel of the whole layer
|
|
*
|
|
* Return:
|
|
* On success - OK
|
|
* On error - -EINVAL
|
|
*
|
|
* Procedure Information:
|
|
* If the srcxpos and srcypos unequal the the xpos and ypos of the coord
|
|
* structure this acts like moving the visible area to another position on
|
|
* the screen during the next update operation.
|
|
*
|
|
*/
|
|
int (*setarea)(FAR struct ltdc_layer_s *layer,
|
|
FAR const struct ltdc_area_s *area,
|
|
fb_coord_t srcxpos,
|
|
fb_coord_t srcypos);
|
|
|
|
/*
|
|
* Name: getarea
|
|
*
|
|
* Description:
|
|
* Get configured visible layer area.
|
|
*
|
|
* Parameter:
|
|
* layer - Reference to the layer control structure
|
|
* area - Reference to the area structure to store the active area
|
|
* srcxpos - Reference to store the referenced x position of the whole layer
|
|
* srcypos - Reference to store the reterenced y position of the whole layer
|
|
*
|
|
* Return:
|
|
* On success - OK
|
|
* On error - -EINVAL
|
|
*
|
|
*/
|
|
int (*getarea)(FAR struct ltdc_layer_s *layer,
|
|
FAR struct ltdc_area_s *area,
|
|
fb_coord_t *srcxpos,
|
|
fb_coord_t *srcypos);
|
|
|
|
/*
|
|
* Name: update
|
|
*
|
|
* Description:
|
|
* Update current layer settings and make changes visible.
|
|
*
|
|
* Parameter:
|
|
* layer - Reference to the layer structure
|
|
* mode - operation mode (see LTDC_UPDATE_*)
|
|
*
|
|
* Return:
|
|
* OK - On success
|
|
* -EINVAL - If one of the parameter invalid
|
|
* -ECANCELED - Operation cancelled, something goes wrong
|
|
*
|
|
* Procedure information:
|
|
* LTDC_UPDATE_SIM:
|
|
* Informs the driver to update both ltdc layers simultaneously. Otherwise
|
|
* update the given layer only.
|
|
*
|
|
* LTDC_UPDATE_FLIP:
|
|
* Informs the driver to perform a flip operation.
|
|
* This only effects the ltdc layer 1 and 2 and can be useful for double
|
|
* buffering. Each flip operation changed the active layer ot the inactive
|
|
* and vice versa. In the context of the ltdc that means, the inactive layer
|
|
* is complete disabled. So the subjacent layer is the background layer
|
|
* (background color). To reactivate both layer and their settings perform
|
|
* an update without LTDC_UPDATE_FLIP flag.
|
|
*
|
|
* LTDC_UPDATE_ACTIVATE:
|
|
* Informs the driver that the given layer should be the active layer when
|
|
* the operation is complete.
|
|
*
|
|
* LTDC_SYNC_VBLANK:
|
|
* Informs the driver to update the layer upon vertical blank. Otherwise
|
|
* immediately.
|
|
*
|
|
*/
|
|
int (*update)(FAR struct ltdc_layer_s *layer, uint32_t mode);
|
|
|
|
#ifdef CONFIG_STM32_DMA2D
|
|
/*
|
|
* Name: blit
|
|
*
|
|
* Description:
|
|
* Copy selected area from a source layer to selected position of the
|
|
* destination layer.
|
|
*
|
|
* Parameter:
|
|
* dest - Reference to the destination layer
|
|
* destxpos - Selected x position of the destination layer
|
|
* destypos - Selected y position of the destination layer
|
|
* src - Reference to the source layer
|
|
* srcarea - Reference to the selected area of the source layer
|
|
*
|
|
* Return:
|
|
* OK - On success
|
|
* -EINVAL - If one of the parameter invalid or if the size of the selected
|
|
* source area outside the visible area of the destination layer.
|
|
* (The visible area usually represents the display size)
|
|
*
|
|
*/
|
|
int (*blit)(FAR struct ltdc_layer_s *dest,
|
|
fb_coord_t destxpos, fb_coord_t destypos,
|
|
FAR const struct dma2d_layer_s *src,
|
|
FAR const struct ltdc_area_s *srcarea);
|
|
/*
|
|
*
|
|
* Name: blend
|
|
*
|
|
* Description:
|
|
* Blends the selected area from a foreground layer with selected position
|
|
* of the background layer. Copy the result to the destination layer. Note!
|
|
* The content of the foreground and background layer is not changed.
|
|
*
|
|
* Parameter:
|
|
* dest - Reference to the destination layer
|
|
* destxpos - Selected x position of the destination layer
|
|
* destypos - Selected y position of the destination layer
|
|
* fore - Reference to the foreground layer
|
|
* forexpos - Selected x position of the foreground layer
|
|
* foreypos - Selected y position of the foreground layer
|
|
* back - Reference to the background layer
|
|
* backarea - Reference to the selected area of the background layer
|
|
*
|
|
* Return:
|
|
* OK - On success
|
|
* -EINVAL - If one of the parameter invalid or if the size of the selected
|
|
* source area outside the visible area of the destination layer.
|
|
* (The visible area usually represents the display size)
|
|
*
|
|
*/
|
|
int (*blend)(FAR struct ltdc_layer_s *dest,
|
|
fb_coord_t destxpos, fb_coord_t destypos,
|
|
FAR const struct dma2d_layer_s *fore,
|
|
fb_coord_t forexpos, fb_coord_t foreypos,
|
|
FAR const struct dma2d_layer_s *back,
|
|
FAR const struct ltdc_area_s *backarea);
|
|
|
|
/*
|
|
* Name: fillarea
|
|
*
|
|
* Description:
|
|
* Fill the selected area of the whole layer with a specific color.
|
|
*
|
|
* Parameter:
|
|
* layer - Reference to the layer structure
|
|
* area - Reference to the valid area structure select the area
|
|
* color - Color to fill the selected area. Color must be formatted
|
|
* according to the layer pixel format.
|
|
*
|
|
* Return:
|
|
* OK - On success
|
|
* -EINVAL - If one of the parameter invalid or if the size of the selected
|
|
* area outside the visible area of the layer.
|
|
*
|
|
*/
|
|
int (*fillarea)(FAR struct ltdc_layer_s *layer,
|
|
FAR const struct ltdc_area_s *area,
|
|
uint32_t color);
|
|
#endif
|
|
};
|
|
|
|
/****************************************************************************
|
|
* Public Data
|
|
****************************************************************************/
|
|
|
|
/****************************************************************************
|
|
* Public Functions
|
|
****************************************************************************/
|
|
|
|
/****************************************************************************
|
|
* Name: up_ltdcgetlayer
|
|
*
|
|
* Description:
|
|
* Get the ltdc layer structure to perform hardware layer operation
|
|
*
|
|
* Parameter:
|
|
* lid - Layer identifier
|
|
*
|
|
* Return:
|
|
* Reference to the layer control structure on success or Null if parameter
|
|
* invalid.
|
|
*
|
|
****************************************************************************/
|
|
FAR struct ltdc_layer_s *up_ltdcgetlayer(int lid);
|
|
#endif /* CONFIG_STM32_LTDC */
|
|
#endif /* __ARCH_ARM_INCLUDE_STM32_LTDC_H */
|