nuttx/configs/cc3200-launchpad/tools/cc3200.cfg
2014-09-08 16:00:26 -06:00

86 lines
2.6 KiB
INI

#******************************************************************************************
#
# CC3200 OpenOCD configuration file
#
# Copyright (C) 2014 Droidifi LLC. All rights reserved.
# Author: Jim Ewing <jim@droidifi.com>
#
# Redistributions must retain the above copyright notice and the
# following disclaimer.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
interface ftdi
ftdi_device_desc "USB <-> JTAG/SWD"
ftdi_vid_pid 0x0451 0xc32a
ftdi_layout_init 0x00a8 0x00eb
ftdi_layout_signal nSRST -noe 0x0020
adapter_khz 1000
set _ENDIAN little
if { [info exists CHIPNAME] } {
set _CHIPNAME $CHIPNAME
} else {
set _CHIPNAME cc3200
}
source [find target/icepick.cfg]
if { [info exists DAP_TAPID] } {
set _DAP_TAPID $DAP_TAPID
} else {
set _DAP_TAPID 0x0b97c02f
}
jtag newtap $_CHIPNAME dap -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_DAP_TAPID -disable
# APP m4
jtag configure $_CHIPNAME.dap -event tap-enable "icepick_c_tapenable $_CHIPNAME.jrc 0"
# ICEpick-C (JTAG route controller)
if { [info exists JRC_TAPID] } {
set _JRC_TAPID $JRC_TAPID
} else {
set _JRC_TAPID $_DAP_TAPID
}
jtag newtap $_CHIPNAME jrc -irlen 6 -ircapture 0x1 -irmask 0x3f -expected-id $_JRC_TAPID -ignore-version
jtag configure $_CHIPNAME.jrc -event setup "jtag tapenable $_CHIPNAME.dap"
jtag configure $_CHIPNAME.jrc -event post-reset "runtest 100"
set _TARGETNAME $_CHIPNAME.cpu
target create $_CHIPNAME.cpu cortex_m -endian little -chain-position $_CHIPNAME.dap
$_CHIPNAME.cpu configure -work-area-phys 0x20000000 -work-area-size 0x30000 -work-area-backup 0 -coreid 0
source [find mem_helper.tcl]
$_TARGETNAME configure -event gdb-attach {
# cortex_m dbginit
halt
}
$_TARGETNAME configure -event "reset-start" { adapter_khz 1000 }
$_TARGETNAME configure -event "reset-assert" {
global _CHIPNAME
# assert warm system reset through ICEPick
icepick_c_wreset $_CHIPNAME.jrc
}