nuttx/boards/arm/cxd56xx/spresense/configs/example_lcd/defconfig
Alin Jerpelea 2be1153030 Merged in alinjerpelea/nuttx (pull request #1061)
boards: cxd56xx: spresense: cleanup and new defconfig

* arch: cxd56xx: remove NVIC_SYSH redefinition

    The NVIC_SYSH is already defined in nvicpri.h

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* boards: cxd56xx: spresense: configs: enable SPRESENSE_EXTENSION

    Enable high current mode for the Spresense Extension board on all examples
    that have SDCARD support

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* boards: cxd56xx: spresense: ifdef SDCARD_TXS02612

    The SD Card TXS02612 port expander is hosted on the Extension board and
    should not be enabled if the extension board is not prezent.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* boards: cxd56xx: spresense: configs: increase MQ_MAXMSGSIZE

    This change is needed by the display driver on spresense platform

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* boards: cxd56xx: spresense: config: add lcd examples defconfig

    This is a configuration for the basic nx examples

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2019-10-24 14:26:02 +00:00

116 lines
2.9 KiB
Plaintext

#
# This file is autogenerated: PLEASE DO NOT EDIT IT.
#
# You can use "make menuconfig" to make any modifications to the installed .config file.
# You can then do "make savedefconfig" to generate a new defconfig file that includes your
# modifications.
#
# CONFIG_CXD56_I2C0_SCUSEQ is not set
# CONFIG_MMCSD_HAVE_WRITEPROTECT is not set
# CONFIG_MMCSD_SPI is not set
# CONFIG_MTD_SMART_WEAR_LEVEL is not set
# CONFIG_NXFONTS_DISABLE_16BPP is not set
# CONFIG_NX_DISABLE_16BPP is not set
# CONFIG_STANDARD_SERIAL is not set
CONFIG_ARCH="arm"
CONFIG_ARCH_BOARD="spresense"
CONFIG_ARCH_BOARD_SPRESENSE=y
CONFIG_ARCH_CHIP="cxd56xx"
CONFIG_ARCH_CHIP_CXD56XX=y
CONFIG_ARCH_STACKDUMP=y
CONFIG_ARMV7M_USEBASEPRI=y
CONFIG_BOARD_LOOPSPERMSEC=5434
CONFIG_BOOT_RUNFROMISRAM=y
CONFIG_BUILTIN=y
CONFIG_CDCACM=y
CONFIG_CDCACM_COMPOSITE=y
CONFIG_CLOCK_MONOTONIC=y
CONFIG_COMPOSITE_IAD=y
CONFIG_COMPOSITE_MSFT_OS_DESCRIPTORS=y
CONFIG_COMPOSITE_PRODUCTID=0x0bc2
CONFIG_COMPOSITE_VENDORID=0x054c
CONFIG_COMPOSITE_VENDORSTR="Sony"
CONFIG_CXD56_BINARY=y
CONFIG_CXD56_DMAC_SPI4_RX=y
CONFIG_CXD56_DMAC_SPI4_TX=y
CONFIG_CXD56_I2C0=y
CONFIG_CXD56_I2C=y
CONFIG_CXD56_SDIO=y
CONFIG_CXD56_SPI5=y
CONFIG_CXD56_SPI=y
CONFIG_CXD56_USBDEV=y
CONFIG_DEBUG_FULLOPT=y
CONFIG_DEBUG_SYMBOLS=y
CONFIG_EXAMPLES_NX=y
CONFIG_EXAMPLES_NXDEMO=y
CONFIG_EXAMPLES_NXHELLO=y
CONFIG_EXAMPLES_NXHELLO_BPP=16
CONFIG_EXAMPLES_NXLINES=y
CONFIG_EXAMPLES_NXLINES_BPP=16
CONFIG_EXAMPLES_NX_BPP=16
CONFIG_FAT_LCNAMES=y
CONFIG_FAT_LFN=y
CONFIG_FAT_MAXFNAME=64
CONFIG_FS_FAT=y
CONFIG_FS_PROCFS=y
CONFIG_FS_PROCFS_REGISTER=y
CONFIG_FS_SMARTFS=y
CONFIG_HAVE_CXX=y
CONFIG_HAVE_CXXINITIALIZE=y
CONFIG_I2C=y
CONFIG_LCD=y
CONFIG_LCD_ILI9340=y
CONFIG_LCD_ILI9340_IFACE0=y
CONFIG_MAX_TASKS=16
CONFIG_MAX_WDOGPARMS=2
CONFIG_MMCSD=y
CONFIG_MMCSD_SDIO=y
CONFIG_MQ_MAXMSGSIZE=64
CONFIG_MTD_BYTE_WRITE=y
CONFIG_MTD_PARTITION=y
CONFIG_MTD_SMART=y
CONFIG_MTD_SMART_ENABLE_CRC=y
CONFIG_MTD_SMART_SECTOR_SIZE=4096
CONFIG_NFILE_DESCRIPTORS=8
CONFIG_NFILE_STREAMS=8
CONFIG_NSH_ARCHINIT=y
CONFIG_NSH_BUILTIN_APPS=y
CONFIG_NSH_READLINE=y
CONFIG_NX=y
CONFIG_NXFONT_SERIF22X29=y
CONFIG_NX_BLOCKING=y
CONFIG_PREALLOC_MQ_MSGS=4
CONFIG_PREALLOC_TIMERS=4
CONFIG_PREALLOC_WDOGS=16
CONFIG_RAM_SIZE=1572864
CONFIG_RAM_START=0x0d000000
CONFIG_READLINE_CMD_HISTORY=y
CONFIG_RR_INTERVAL=200
CONFIG_RTC=y
CONFIG_RTC_DRIVER=y
CONFIG_SCHED_WAITPID=y
CONFIG_SDCLONE_DISABLE=y
CONFIG_SMARTFS_ALIGNED_ACCESS=y
CONFIG_SMARTFS_MAXNAMLEN=30
CONFIG_SMARTFS_MULTI_ROOT_DIRS=y
CONFIG_SPI=y
CONFIG_SPRESENSE_EXTENSION=y
CONFIG_START_DAY=6
CONFIG_START_MONTH=12
CONFIG_START_YEAR=2011
CONFIG_SYSTEM_CDCACM=y
CONFIG_SYSTEM_CLE=y
CONFIG_SYSTEM_COMPOSITE=y
CONFIG_SYSTEM_NSH=y
CONFIG_SYSTEM_NSH_CXXINITIALIZE=y
CONFIG_SYSTEM_USBMSC=y
CONFIG_UART1_SERIAL_CONSOLE=y
CONFIG_USBDEV=y
CONFIG_USBDEV_COMPOSITE=y
CONFIG_USBDEV_DMA=y
CONFIG_USBDEV_DUALSPEED=y
CONFIG_USBMSC=y
CONFIG_USBMSC_COMPOSITE=y
CONFIG_USBMSC_REMOVABLE=y
CONFIG_USER_ENTRYPOINT="spresense_main"