| .. |
|
1wire
|
ds28e17.h edited online with Bitbucket
|
2018-04-05 12:08:56 +00:00 |
|
analog
|
drivers/analog: Add driver for digital to analog converted DAC7571.
|
2018-08-02 06:40:48 -06:00 |
|
audio
|
audio/audio_comp.c: Add the composite audio driver
|
2018-08-27 09:03:09 -06:00 |
|
binfmt
|
binfmt/: Mostly cosmetic changes from review of a previous commit.
|
2018-08-24 06:10:50 -06:00 |
|
can
|
arch/arm/src/samv7: Add ability for CAN BUS_OFF autorecovery according ISO11898-1:2015. With this change we added an ioctl for triggering the autorecovery sequence for BUS_OFF to the CAN-driver and the SAMV7 low-level driver. According the datasheet: If the device goes Bus_Off, it will set MCAN_CCCR.INIT of its own accord, stopping all bus activities. Once MCAN_CCCR.INIT has been cleared by the processor (application), the device will then wait for 129 occurrences of Bus Idle (129 * 11 consecutive recessive bits) before resuming normal operation. At the end of the Bus_Off recovery sequence, the Error Management Counters will be reset. During the waiting time after the resetting of MCAN_CCCR.INIT, each time a sequence of 11 recessive bits has been monitored, a Bit0 Error code is written to MCAN_PSR.LEC, enabling the processor to readily check up whether the CAN bus is stuck at dominant or continuously disturbed and to monitor the Bus_Off recovery sequence. MCAN_ECR.REC is used to count these sequences.
|
2018-07-04 07:48:59 -06:00 |
|
contactless
|
|
|
|
crypto
|
Make sure that labeling is used consistently in all function headers.
|
2018-02-01 10:00:02 -06:00 |
|
drivers
|
This commit adds a 1wire subsystem.
|
2018-04-04 10:57:36 -06:00 |
|
eeprom
|
drivers/eeprobom: EEPROM driver for AT24xx compatible EEPROMs.
|
2018-02-14 07:53:01 -06:00 |
|
fs
|
fs/inode/fs_fileclose.c: Move file_close() a separate file. It no longer makes since for it to cohabitate with file_detach().
|
2018-09-15 13:19:14 -06:00 |
|
i2c
|
include/nuttx/i2c/i2c_master.h: Add the standard speed macros.
|
2018-08-27 06:02:13 -06:00 |
|
input
|
Make sure that labeling is used consistently in all function headers.
|
2018-02-01 10:00:02 -06:00 |
|
ioexpander
|
include/nuttx/ioexpander/gpio.h: Fix build break introduced by commit 459d9f2851
|
2018-08-30 07:25:26 -06:00 |
|
lcd
|
Remove trailing spaces at the end of lines.
|
2018-08-13 07:39:38 -06:00 |
|
leds
|
Squashed commit of the following:
|
2018-07-22 15:13:39 -06:00 |
|
lib
|
include/nuttx/lib/modlib.h: Eliminate warning: 'CONFIG_MODLIB_MAXDEPEND' is not defined'
|
2018-08-27 11:39:52 -06:00 |
|
mm
|
mm/iob: iob_navail() was returning the number of free IOB chain queue entries, not the number of free IOBs. Completely misnamed.
|
2018-09-12 06:40:18 -06:00 |
|
modem
|
|
|
|
mtd
|
drivers/mtd/ftl.c: Support initialization of an FTL block device with a custom name
|
2018-08-28 07:15:57 -06:00 |
|
net
|
net/usrsock: Add the listen/accept/getpeername/ioctl support
|
2018-08-26 15:15:48 -06:00 |
|
nx
|
Make sure that labeling is used consistently in all function headers (part 3).
|
2018-02-01 12:17:03 -06:00 |
|
power
|
arch/arm/src/stm32f7: Remove adhoc PM interfaces and add CONFIG_PM serial suspend.
|
2018-09-21 06:44:23 -06:00 |
|
sensors
|
drivers/sensors/dhtxx.c: Driver for DHTxx sensor.
|
2018-09-01 07:25:30 -06:00 |
|
serial
|
drivers/serial: Add support for Ctrl-Z. This works just like the recently added Ctrl-C support except that SIGSTP is sent when the Ctrl-Z characters is encountered vs. SIGINT.
|
2018-09-02 15:36:25 -06:00 |
|
spi
|
include/nuttx/spi/spi.h: Add a definition for a USBHOST SPI device. drivers/usbhost/usbhost_max3421e.c: Review and correct SPI locking usage.
|
2018-07-04 08:55:43 -06:00 |
|
syslog
|
syslog: Enable is partial, crippled version of syslog_flush(); arch/: Call syslog_flush() from assertion handling logic.
|
2018-06-07 16:29:16 -06:00 |
|
timers
|
Squashed commit of the following:
|
2018-08-27 11:55:30 -06:00 |
|
usb
|
include/nuttx/usb/audio.h: Fix warning: 'missing whitespace after the macro name'
|
2018-08-29 06:10:52 -06:00 |
|
video
|
Fix lots of typos in C comments and Kconfig help text
|
2018-07-08 18:24:45 -06:00 |
|
wireless
|
Add missing function names in function headers.
|
2018-08-13 15:53:15 -06:00 |
|
.gitignore
|
|
|
|
addrenv.h
|
|
|
|
arch.h
|
Rename CONFIG_ARCH_HAVE_TRIGGER_HOOK to CONFIG_ARCH_HAVE_IRQTRIGGER
|
2018-08-25 09:10:30 -06:00 |
|
ascii.h
|
|
|
|
board.h
|
configs/boardctl.c: Add support for board_app_finalinitialize()
|
2018-08-28 15:34:31 -06:00 |
|
cancelpt.h
|
Make sure that labeling is used consistently in all function headers.
|
2018-02-01 10:00:02 -06:00 |
|
clock.h
|
Move clock_timespec_[add|subtract] to include/nuttx/clock.h
|
2018-08-27 06:04:04 -06:00 |
|
compiler.h
|
include/nuttx/compiler.h: fix warning: __cplusplus is not defined. Some gcc derived compiler do not define __cplusplus
|
2018-08-27 05:53:16 -06:00 |
|
environ.h
|
fs/proc and sched/environ: Add support for a procfs entry that will permit examining the environment of any task.
|
2018-08-10 10:16:39 -06:00 |
|
init.h
|
|
|
|
irq.h
|
sched/irq: Add support interrupt chains in NuttX. IRQ chain is very useful in these cases: (1) Multiple hardware connect to the same request line(e.g. PCI), (2) Need multiple driver to support one hardware block (like Linux MFD)
|
2018-08-24 15:10:23 -06:00 |
|
kmalloc.h
|
include/nuttx/kmalloc.h: Add {kumm/kmm}_calloc API. Add calloc API for manage user memory and kernel memory in Flat Build/Kernel Build without kernel heap.
|
2018-08-27 05:55:09 -06:00 |
|
kthread.h
|
Update some comments. Remove references to non-existent CONFIG_MAX_TASK_ARG.
|
2018-08-08 17:06:46 -06:00 |
|
mmcsd.h
|
|
|
|
module.h
|
|
|
|
mqueue.h
|
Make sure that labeling is used consistently in all function headers.
|
2018-02-01 10:00:02 -06:00 |
|
mutex.h
|
include/nuttx/mutex.h: Add inline wrapper functions to more clearly support semaphores when used as mutexs.
|
2018-08-27 06:26:11 -06:00 |
|
nuttx.h
|
Kconfig: Move 'option modules' from NSH_FILE_APPS to BUILD_LOADABLE
|
2018-08-27 07:06:57 -06:00 |
|
page.h
|
|
|
|
pgalloc.h
|
mm/mm_gran: Add a function to get information about the state of the granuale allocator.
|
2017-11-14 14:41:03 -06:00 |
|
poff.h
|
|
|
|
progmem.h
|
Merged in ebsong/nuttx (pull request #722)
|
2018-09-21 03:18:38 +00:00 |
|
pthread.h
|
pthreads: Add support static pthread stack. Add standard pthread_attr_setstack() and pthread_attr_getstack(). In all cases where the stack is released, add check to see which allocator must be used to free the stack: The user or the kernel allocator.
|
2018-08-23 09:49:20 -06:00 |
|
random.h
|
Standardization of some function headers.
|
2018-03-13 09:52:27 -06:00 |
|
sched_note.h
|
|
|
|
sched.h
|
sched/: Update signal default STOP action. If waitpid was called with the WUNTRACED then wake up waitpid. Also fix some compile problems.. How did this work before?
|
2018-09-02 13:51:52 -06:00 |
|
scsi.h
|
|
|
|
sdio.h
|
drivers/mmcsd/Kconfig: three configuration settings were within ifdef/endif and led to warning: xxx selects xxxx which has unmet direct dependencies. Fix by moving settings to drivers/Kconfig and outside of the ifdef-endif. Also renamed CONFIG_SDIO_PREFLIGHT to CONFIG_ARCH_HAVE_SDIO_PREFLIGHT to follow naming of similar hidden architecture capability configurations.
|
2018-08-05 17:58:17 -06:00 |
|
semaphore.h
|
nclude/nuttx/semaphore: apply the semaphore wait function nxsem_wait_uninterruptible(). The function nxsem_wait_uninterruptible() is a wrapped version of nxsem_wait(), which is uninterruptible and convenient for use.
|
2018-08-27 06:07:50 -06:00 |
|
signal.h
|
Signals were not a good choice of IPC to implement the poll function for several reasons: In order to handle the asynchrnous poll-related event, a substantial amount of state information is needed. Signals are only capable of passing minimal amounts of data. There are also complexities with performing kernel space signal handlers in kernel space code that is better to avoid. So, instead of signals, the equivalent logic was converted to run via a callback that executes on the high-priority work queue.
|
2018-09-09 15:01:44 -06:00 |
|
spawn.h
|
|
|
|
spinlock.h
|
armv7-a, armv7-r, armv7-m: Add atomic read-add-write and read-subtract-write functions.
|
2018-02-04 12:22:03 -06:00 |
|
streams.h
|
Make sure that labeling is used consistently in all function headers.
|
2018-02-01 10:00:02 -06:00 |
|
symtab.h
|
|
|
|
time.h
|
Make sure that labeling is used consistently in all function headers.
|
2018-02-01 10:00:02 -06:00 |
|
tls.h
|
|
|
|
tree.h
|
|
|
|
userspace.h
|
Make sure that labeling is used consistently in all function headers.
|
2018-02-01 10:00:02 -06:00 |
|
vt100.h
|
|
|
|
wdog.h
|
Standardization of some function headers.
|
2018-03-13 09:52:27 -06:00 |
|
wqueue.h
|
Squashed commit of the following:
|
2018-09-12 08:57:06 -06:00 |
|
zoneinfo.h
|
|
|
