56529d2944
- migrated /README are removed from /boards - there are a lot of READMEs that should be further converted to rst. At the moment they are moved to Documentation/platforms and included in rst files
146 lines
5.7 KiB
Plaintext
146 lines
5.7 KiB
Plaintext
README
|
|
^^^^^^
|
|
|
|
README for NuttX port to the u-blox C027 dev board.
|
|
|
|
The board is intended for prototyping software for u-blox cellular modems (SARA
|
|
or LISA families) and the u-blox GPS receiver (MAX-7Q, MAX-M8Q, or other,
|
|
depending on board revision).
|
|
|
|
This board features the LPC1768 MCU and is related to the Embedded Artists' base
|
|
board with the NXP the LPCXpresso daughter board, see
|
|
boards/lpcxpresso-lpc1768/README.txt.
|
|
|
|
The board also features an embedded USB debugger.
|
|
|
|
Contents
|
|
^^^^^^^^
|
|
|
|
u-blox C027 Board
|
|
Configurations
|
|
|
|
u-blox C027 Board
|
|
^^^^^^^^^^^^^^^^^
|
|
|
|
Pin Description Connector On Board
|
|
-------------------------------- --------- --------------
|
|
P0[0]/RD1/TXD3/SDA1 D14 TXD3/SDA1
|
|
P0[1]/TD1/RXD3/SCL1 D15 RXD3/SCL1
|
|
P0[2]/TXD0/AD0[7] USBTXD
|
|
P0[3]/RXD0/AD0[6] USBRXD
|
|
P0[4]/I2SRX-CLK/RD2/CAP2.0 CANRD CAN_RX2
|
|
P0[5]/I2SRX-WS/TD2/CAP2.1 CANTD CAN_TX2
|
|
P0[6]/I2SRX_SDA/SSEL1/MAT2[0] CANS SSEL1
|
|
P0[7]/I2STX_CLK/SCK1/MAT2[1] MDMUSBDET
|
|
P0[8]/I2STX_WS/MISO1/MAT2[2] MDMLVLOE
|
|
P0[9]/I2STX_SDA/MOSI1/MAT2[3] MDMILVLOE
|
|
P0[10]/TXD2/SDA2 GPSTXD
|
|
P0[11]/RXD2/SCL2 GPSRXD
|
|
P0[15]/TXD1/SCK0/SCK MDMTXD
|
|
P0[16]/RXD1/SSEL0/SSEL MDMRXD
|
|
P0[17]/CTS1/MISO0/MISO MDMCTS
|
|
P0[18]/DCD1/MOSI0/MOSI MDMDCD
|
|
P0[19]/DSR1/SDA1 MDMDCR
|
|
P0[20]/DTR1/SCL1 MDMDTR
|
|
P0[21]/RI1/MCIPWR/RD1 MDMRI
|
|
P0[22]/RTS1/TD1 MDMRTS
|
|
P0[23]/AD0[0]/I2SRX_CLK/CAP3[0] A0 I2S_CLK
|
|
P0[24]/AD0[1]/I2SRX_WS/CAP3[1] A1 I2S_WS
|
|
P0[25]/AD0[2]/I2SRX_SDA/TXD3 A2 I2S_SDA
|
|
P0[26]/AD0[3]/AOUT/RXD3 A3 AD0.3/AOUT
|
|
P0[27]/SDA0/USB_SDA GPSSDA
|
|
P0[28]/SCL0 GPSSCL
|
|
P0[29]/USB_D+ MDMUSBDP
|
|
P0[30]/USB_D- MDMUSBDM
|
|
P1[0]/ENET_TXD0 ENET_TXD0
|
|
P1[1]/ENET_TXD1 ENET_TXD1
|
|
P1[4]/ENET_TX_EN ENET_TX_EN
|
|
P1[8]/ENET_CRS ENET_CRS
|
|
P1[9]/ENET_RXD0 ENET_RXD0
|
|
P1[10]/ENET_RXD1 ENET_RXD1
|
|
P1[14]/ENET_RX_ER ENET_RX_ER
|
|
P1[15]/ENET_REF_CLK ENET_REF_CLK
|
|
P1[16]/ENET_MDC ENET_MDC
|
|
P1[17]/ENET_MDIO ENET_MDIO
|
|
P1[18]/USB_UP_LED/PWM1[1]/CAP1[0] GPSRST
|
|
P1[19]/MC0A/USB_PPWR/N_CAP1.1 GPSPPS
|
|
P1[20]/MCFB0/PWM1.2/SCK0 D13 PWM1.2/SCK0
|
|
P1[21]/MCABORT/PWM1.3/SSEL0 D10 PWM1.3/SSEL0
|
|
P1[22]/MC0B/USB-PWRD/MAT1.0 GPSINT
|
|
P1[23]/MCFB1/PWM1.4/MISO0 D12 PWM1.4/MISO0
|
|
P1[24]/MCFB2/PWM1.5/MOSI0 D11 PWM1.5/MOSI0
|
|
P1[25]/MC1A/MAT1.1 ETH_LED_LNK
|
|
P1[26]/MC1B/PWM1.6/CAP0.0 ETH_LED_SPD
|
|
P1[27]/CLKOUT/USB-OVRCR-N/CAP0.1 ETH_OSC_EN
|
|
P1[28]/MC2A/PCAP1.0/MAT0.0 ETH_RST
|
|
P1[29]/MC2B/PCAP1.1/MAT0.1 GPSEN
|
|
P1[30]/VBUS/AD0[4] A4 AD0.4
|
|
P1[31]/SCK1/AD0[5] A5 AD0.5
|
|
P2[0]/PWM1.1/TXD1 D3 PWM1.1
|
|
P2[1]/PWM1.2/RXD1 D5 PWM1.2
|
|
P2[2]/PWM1.3/CTS1/TRACEDATA[3] D6 PWM1.3
|
|
P2[3]/PWM1.4/DCD1/TRACEDATA[2] D9 PWM1.4
|
|
P2[4]/PWM1.5/DSR1/TRACEDATA[1] D8 PWM1.5
|
|
P2[5]/PWM1[6]/DTR1/TRACEDATA[0] MDMEN
|
|
P2[6]/PCAP1[0]/RI1/TRACECLK MDMPWRON
|
|
P2[7]/RD2/RTS1 MDMGPIO1
|
|
P2[8]/TD2/TXD2 MDMRST
|
|
P2[9]/USB_CONNECT/RXD2 MDMUSBCON
|
|
P2[10]/EINT0/NMI ISP_PAD
|
|
P2[11]/EINT1/I2STX_CLK D7 EINT1
|
|
P2[12]/EINT2/I2STX_WS D4 EINT2
|
|
P2[13]/EINT3/I2STX_SDA D2 EINT3
|
|
P3[25]/MAT0.0/PWM1.2 LED
|
|
P4[28]/RX-MCLK/MAT2.0/TXD3 D0 TXD3
|
|
P4[29]/TX-MCLK/MAT2.1/RXD3 D1 RXD3
|
|
|
|
Configurations
|
|
^^^^^^^^^^^^^^
|
|
|
|
nsh
|
|
---
|
|
|
|
The nsh configuration allows to test the modem and the GPS receiver. The modem
|
|
can be tested in either the internal TCP/IP stack mode or with the NuttX TCP/IP
|
|
stack and pppd.
|
|
|
|
Modem starts in power-down mode and has to be switched on, e.g., using the nsh
|
|
command:
|
|
|
|
nsh> ubloxmodem on
|
|
|
|
To connect using the NuttX TCP/IP stack, use pppd. At the time of writing the
|
|
pppd app is located in apps/examples/pppd and requires setting correct login
|
|
details in the source code.
|
|
|
|
To connect using the internal u-blox TCP/IP stack, use the chat app. Its
|
|
configuration is done in
|
|
boards/arm/lpc17xx_40xx/u-blox-c027/nsh/defconfig and can be adjusted
|
|
using 'make menuconfig'.
|
|
|
|
The NuttX u-blox modem driver is included like this:
|
|
|
|
CONFIG_MODEM=y
|
|
CONFIG_MODEM_U_BLOX=y
|
|
|
|
The nsh app that allows power control is included with the default configuration
|
|
as follows:
|
|
|
|
CONFIG_EXAMPLES_UBLOXMODEM=y
|
|
CONFIG_EXAMPLES_UBLOXMODEM_TTY_DEVNODE="/dev/ttyS1"
|
|
CONFIG_EXAMPLES_UBLOXMODEM_DEVNODE="/dev/ubxmdm"
|
|
|
|
The modem driver uses two device nodes. The TTY device is the modem terminal,
|
|
while the other device is used for general control via GPIO such as power
|
|
control. At the moment only one modem is supported, and the corresponding device
|
|
control node is /dev/ubxmdm.
|
|
|
|
The chat app allows to run scripts. A few such scripts are preset in the
|
|
defconfig:
|
|
|
|
CONFIG_EXAMPLES_CHAT_PRESET[0..3]:
|
|
0 - set up the provider context with username and password,
|
|
1 - connect to the provider,
|
|
2 - open a TCP socket to the u-blox test server,
|
|
3 - test the TCP socket server operation and close the socket.
|