72 lines
2.7 KiB
ReStructuredText
72 lines
2.7 KiB
ReStructuredText
================
|
|
ST Nucleo F302R8
|
|
================
|
|
|
|
The Nucleo F302R8 is a member of the Nucleo-64 board family.
|
|
|
|
Configurations
|
|
==============
|
|
|
|
ihm07m1_f32 and ihm07m1_b16:
|
|
----------------------------
|
|
|
|
These examples are dedicated for the X-NUCLEO-IHM07M1 expansion board
|
|
based on L6230 DMOS driver for three-phase brushless DC motors.
|
|
|
|
X-NUCLEO-IHM07M1 must be configured to work with FOC and 3-shunt
|
|
resistors. See ST documentation for details.
|
|
|
|
Pin configuration for the X-NUCLEO-IHM07M1 (TIM1 configuration):
|
|
|
|
============== ================ =================
|
|
Board Function Chip Function Chip Pin Number
|
|
============== ================ =================
|
|
Phase U high TIM1_CH1 PA8
|
|
Phase U enable GPIO_PC10 PC10
|
|
Phase V high TIM1_CH2 PA9
|
|
Phase V enable GPIO_PC11 PC11
|
|
Phase W high TIM1_CH3 PA10
|
|
Phase W enable GPIO_PC12 PC12
|
|
DIAG/EN GPIO_PA11 PA11
|
|
Current U ADC1_IN1 PA0
|
|
Current V ADC1_IN7 PC1
|
|
Current W ADC1_IN6 PC0
|
|
Temperature ADC1_IN8 PC2
|
|
VBUS ADC1_IN2 PA1
|
|
BEMF1 (NU) PC3
|
|
BEMF2 (NU) PB0
|
|
BEMF3 (NU) PA7
|
|
LED GPIO_PB2 PB2
|
|
+3V3 (CN7_16)
|
|
GND (CN7_20)
|
|
GPIO_BEMF (NU) PC9
|
|
ENCO_A/HALL_H1 TIM2_CH1 PA15
|
|
ENCO_B/HALL_H2 TIM2_CH2 PB3
|
|
ENCO_Z/HALL_H3 TIM2_CH3 PB10
|
|
GPIO1 (NU) PB13
|
|
GPIO2 (NU) PB5
|
|
GPIO3 (NU) PA5
|
|
CPOUT (NU) PA12
|
|
BKIN1 (NU) PB14
|
|
POT ADC1_IN12 PB1
|
|
CURR_REF (NU) PB4
|
|
DAC DAC1_CH1 PA4
|
|
DEBUG0 GPIO PB8
|
|
DEBUG1 GPIO PB9
|
|
DEBUG2 GPIO PC6
|
|
DEBUG3 GPIO PC5
|
|
DEBUG4 GPIO PC8
|
|
============== ================ =================
|
|
|
|
Current shunt resistance = 0.33
|
|
Current sense gain = -1.53 (inverted current)
|
|
Vbus sense gain = 9.31k/(9.31k+169k) = 0.0522124390107
|
|
Vbus min = 8V
|
|
Vbus max = 48V
|
|
Iout max = 1.4A RMS
|
|
|
|
IPHASE_RATIO = 1/(R_shunt*gain) = -1.98
|
|
VBUS_RATIO = 1/VBUS_gain = 19.152
|
|
|
|
For now only 3-shunt resistors configuration is supported.
|