387 lines
14 KiB
C
387 lines
14 KiB
C
/************************************************************************************
|
|
* configs/same70-xplained/include/board.h
|
|
*
|
|
* Copyright (C) 2015 Gregory Nutt. All rights reserved.
|
|
* Author: Gregory Nutt <gnutt@nuttx.org>
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
*
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in
|
|
* the documentation and/or other materials provided with the
|
|
* distribution.
|
|
* 3. Neither the name NuttX nor the names of its contributors may be
|
|
* used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
|
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
|
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
|
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
|
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
|
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
|
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
* POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
************************************************************************************/
|
|
|
|
#ifndef __CONFIGS_SAME70_XPLAINED_INCLUDE_BOARD_H
|
|
#define __CONFIGS_SAME70_XPLAINED_INCLUDE_BOARD_H
|
|
|
|
/************************************************************************************
|
|
* Included Files
|
|
************************************************************************************/
|
|
|
|
#include <nuttx/config.h>
|
|
#include <stdbool.h>
|
|
|
|
/************************************************************************************
|
|
* Pre-processor Definitions
|
|
************************************************************************************/
|
|
/* Clocking *************************************************************************/
|
|
/* After power-on reset, the SAME70Q device is running out of the Master Clock using
|
|
* the Fast RC Oscillator running at 4 MHz.
|
|
*
|
|
* MAINOSC: Frequency = 12MHz (crystal)
|
|
*
|
|
* 300MHz Settings:
|
|
* PLLA: PLL Divider = 1, Multiplier = 20 to generate PLLACK = 240MHz
|
|
* Master Clock (MCK): Source = PLLACK, Prescalar = 1 to generate MCK = 120MHz
|
|
* CPU clock: 120MHz
|
|
*
|
|
* There can be two on-board crystals. However, the 32.768 crystal is not
|
|
* populated on the stock SAME70. The fallback is to use th on-chip, slow RC
|
|
* oscillator which has a frequency of 22-42 KHz, nominally 32 KHz.
|
|
*/
|
|
|
|
#undef BOARD_HAVE_SLOWXTAL /* Slow crystal not populated */
|
|
#define BOARD_SLOWCLK_FREQUENCY (32000) /* 32 KHz RC oscillator (nominal) */
|
|
#define BOARD_MAINOSC_FREQUENCY (12000000) /* 12 MHz main oscillator */
|
|
|
|
/* Main oscillator register settings.
|
|
*
|
|
* The main oscillator could be either the embedded 4/8/12 MHz fast RC oscillators
|
|
* or an external 3-20 MHz crystal or ceramic resonator. The external clock source
|
|
* is selected by default in sam_clockconfig.c. Here we need to specify the main
|
|
* oscillator start-up time.
|
|
*
|
|
* REVISIT... this is old information:
|
|
* The start up time should be should be:
|
|
*
|
|
* Start Up Time = 8 * MOSCXTST / SLCK = 56 Slow Clock Cycles.
|
|
*/
|
|
|
|
#define BOARD_CKGR_MOR_MOSCXTST (62 << PMC_CKGR_MOR_MOSCXTST_SHIFT) /* Start-up Time */
|
|
#define BOARD_CKGR_MOR_MOSCXTENBY (PMC_CKGR_MOR_MOSCXTEN) /* Crystal Oscillator Enable */
|
|
|
|
/* PLLA configuration.
|
|
*
|
|
* Divider = 1
|
|
* Multiplier = 25
|
|
*
|
|
* Yields:
|
|
*
|
|
* PLLACK = 25 * 12MHz / 1 = 300MHz
|
|
*/
|
|
|
|
#define BOARD_CKGR_PLLAR_STMODE PMC_CKGR_PLLAR_STMODE_FAST
|
|
#define BOARD_CKGR_PLLAR_COUNT (63 << PMC_CKGR_PLLAR_COUNT_SHIFT)
|
|
#define BOARD_CKGR_PLLAR_MUL PMC_CKGR_PLLAR_MUL(24)
|
|
#define BOARD_CKGR_PLLAR_DIV PMC_CKGR_PLLAR_DIV_BYPASS
|
|
|
|
/* PMC master clock register settings.
|
|
*
|
|
* BOARD_PMC_MCKR_CSS - The source of main clock input. This may be one of:
|
|
*
|
|
* PMC_MCKR_CSS_SLOW Slow Clock
|
|
* PMC_MCKR_CSS_MAIN Main Clock
|
|
* PMC_MCKR_CSS_PLLA PLLA Clock
|
|
* PMC_MCKR_CSS_UPLL Divided UPLL Clock
|
|
*
|
|
* BOARD_PMC_MCKR_PRES - Source clock pre-scaler. May be one of:
|
|
*
|
|
* PMC_MCKR_PRES_DIV1 Selected clock
|
|
* PMC_MCKR_PRES_DIV2 Selected clock divided by 2
|
|
* PMC_MCKR_PRES_DIV4 Selected clock divided by 4
|
|
* PMC_MCKR_PRES_DIV8 Selected clock divided by 8
|
|
* PMC_MCKR_PRES_DIV16 Selected clock divided by 16
|
|
* PMC_MCKR_PRES_DIV32 Selected clock divided by 32
|
|
* PMC_MCKR_PRES_DIV64 Selected clock divided by 64
|
|
* PMC_MCKR_PRES_DIV3 Selected clock divided by 3
|
|
*
|
|
* The prescaler determines (1) the CPU clock and (2) the input into the
|
|
* second divider that then generates the Master Clock (MCK). MCK is the
|
|
* source clock of the peripheral clocks.
|
|
*
|
|
* BOARD_PMC_MCKR_MDIV - MCK divider. May be one of:
|
|
*
|
|
* PMC_MCKR_MDIV_DIV1 Master Clock = Prescaler Output Clock / 1
|
|
* PMC_MCKR_MDIV_DIV2 Master Clock = Prescaler Output Clock / 2
|
|
* PMC_MCKR_MDIV_DIV4 Master Clock = Prescaler Output Clock / 4
|
|
* PMC_MCKR_MDIV_DIV3 Master Clock = Prescaler Output Clock / 3
|
|
*/
|
|
|
|
#define BOARD_PMC_MCKR_CSS PMC_MCKR_CSS_PLLA /* Source = PLLA */
|
|
#define BOARD_PMC_MCKR_PRES PMC_MCKR_PRES_DIV1 /* Prescaler = /1 */
|
|
#define BOARD_PMC_MCKR_MDIV PMC_MCKR_MDIV_DIV2 /* MCK divider = /2 */
|
|
|
|
/* USB clocking */
|
|
|
|
#define BOARD_PMC_MCKR_UPLLDIV2 0 /* UPLL clock not divided by 2 */
|
|
|
|
/* Resulting frequencies */
|
|
|
|
#define BOARD_PLLA_FREQUENCY (300000000) /* PLLACK: 25 * 12Mhz / 1 */
|
|
#define BOARD_CPU_FREQUENCY (300000000) /* CPU: PLLACK / 1 */
|
|
#define BOARD_MCK_FREQUENCY (150000000) /* MCK: PLLACK / 1 / 2 */
|
|
#undef BOARD_UPLL_FREQUENCY /* To be provided */
|
|
|
|
/* HSMCI clocking
|
|
*
|
|
* Multimedia Card Interface clock (MCCK or MCI_CK) is Master Clock (MCK)
|
|
* divided by (2*(CLKDIV) + CLOCKODD + 2).
|
|
*
|
|
* MCI_SPEED = MCK / (2*CLKDIV + CLOCKODD + 2)
|
|
*
|
|
* Where CLKDIV has a range of 0-255.
|
|
*/
|
|
|
|
/* MCK = 150MHz, CLKDIV = 186, MCI_SPEED = 150MHz / (2*186 + 1 + 2) = 400 KHz */
|
|
|
|
#define HSMCI_INIT_CLKDIV ((186 << HSMCI_MR_CLKDIV_SHIFT) | HSMCI_MR_CLKODD)
|
|
|
|
/* MCK = 150MHz, CLKDIV = 3 w/CLOCKODD, MCI_SPEED = 150MHz /(2*3 + 0 + 2) = 18.75 MHz */
|
|
|
|
#define HSMCI_MMCXFR_CLKDIV (2 << HSMCI_MR_CLKDIV_SHIFT)
|
|
|
|
/* MCK = 150MHz, CLKDIV = 2, MCI_SPEED = 150MHz /(2*2 + 0 + 2) = 25 MHz */
|
|
|
|
#define HSMCI_SDXFR_CLKDIV (2 << HSMCI_MR_CLKDIV_SHIFT)
|
|
#define HSMCI_SDWIDEXFR_CLKDIV HSMCI_SDXFR_CLKDIV
|
|
|
|
/* FLASH wait states.
|
|
*
|
|
* Wait states Max frequency at 105 centigrade (STH conditions)
|
|
*
|
|
* VDDIO
|
|
* 1.62V 2.7V
|
|
* --- ------- -------
|
|
* 0 26 MHz 30 MHz
|
|
* 1 52 MHz 62 MHz
|
|
* 2 78 MHz 93 MHz
|
|
* 3 104 MHz 124 MHz
|
|
* 4 131 MHz 150 MHz
|
|
* 5 150 MHz --- MHz
|
|
*
|
|
* Given: VDDIO=3.3V, VDDCORE=1.2V, MCK=150MHz
|
|
*/
|
|
|
|
#define BOARD_FWS 4
|
|
|
|
/* LED definitions ******************************************************************/
|
|
/* LEDs
|
|
*
|
|
* A single LED is available driven by PC8.
|
|
*/
|
|
|
|
/* LED index values for use with board_userled() */
|
|
|
|
#define BOARD_LED0 0
|
|
#define BOARD_NLEDS 1
|
|
|
|
/* LED bits for use with board_userled_all() */
|
|
|
|
#define BOARD_LED0_BIT (1 << BOARD_LED0)
|
|
|
|
/* This LED is not used by the board port unless CONFIG_ARCH_LEDS is
|
|
* defined. In that case, the usage by the board port is defined in
|
|
* include/board.h and src/sam_autoleds.c. The LEDs are used to encode
|
|
* OS-related events as follows:
|
|
*
|
|
* ------------------- ---------------------------- ------
|
|
* SYMBOL Meaning LED
|
|
* ------------------- ---------------------------- ------ */
|
|
|
|
#define LED_STARTED 0 /* NuttX has been started OFF */
|
|
#define LED_HEAPALLOCATE 0 /* Heap has been allocated OFF */
|
|
#define LED_IRQSENABLED 0 /* Interrupts enabled OFF */
|
|
#define LED_STACKCREATED 1 /* Idle stack created ON */
|
|
#define LED_INIRQ 2 /* In an interrupt N/C */
|
|
#define LED_SIGNAL 2 /* In a signal handler N/C */
|
|
#define LED_ASSERTION 2 /* An assertion failed N/C */
|
|
#define LED_PANIC 3 /* The system has crashed FLASH */
|
|
#undef LED_IDLE /* MCU is is sleep mode Not used */
|
|
|
|
/* Thus is LED is statically on, NuttX has successfully booted and is,
|
|
* apparently, running normally. If LED is flashing at approximately
|
|
* 2Hz, then a fatal error has been detected and the system has halted.
|
|
*/
|
|
|
|
/* Button definitions ***************************************************************/
|
|
/* Buttons
|
|
*
|
|
* SAM E70 Xplained contains two mechanical buttons. One button is the RESET
|
|
* button connected to the SAM E70 reset line and the other, PA11, is a generic
|
|
* user configurable button. When a button is pressed it will drive the I/O
|
|
* line to GND.
|
|
*
|
|
* NOTE: There are no pull-up resistors connected to the generic user buttons
|
|
* so it is necessary to enable the internal pull-up in the SAM E70 to use the
|
|
* button.
|
|
*/
|
|
|
|
#define BUTTON_SW0 0
|
|
#define NUM_BUTTONS 1
|
|
|
|
#define BUTTON_SW0_BIT (1 << BUTTON_SW0)
|
|
|
|
/* PIO Disambiguation ***************************************************************/
|
|
/* Serial Console
|
|
*
|
|
* The SAME70-XPLD has no on-board RS-232 drivers so it will be necessary to use
|
|
* either the VCOM or an external RS-232 driver. Here are some options.
|
|
*
|
|
* - Arduino Serial Shield: One option is to use an Arduino-compatible
|
|
* serial shield. This will use the RXD and TXD signals available at pins
|
|
* 0 an 1, respectively, of the Arduino "Digital Low" connector. On the
|
|
* SAME70-XPLD board, this corresponds to UART3:
|
|
*
|
|
* ------ ------ ------- ------- --------
|
|
* Pin on SAME70 Arduino Arduino SAME70
|
|
* J503 PIO Name Pin Function
|
|
* ------ ------ ------- ------- --------
|
|
* 1 PD28 RX0 0 URXD3
|
|
* 2 PD30 TX0 1 UTXD3
|
|
* ------ ------ ------- ------- --------
|
|
*
|
|
* There are alternative pin selections only for UART3 TXD:
|
|
*/
|
|
|
|
#define GPIO_UART3_TXD GPIO_UART3_TXD_1
|
|
|
|
|
|
/* - Arduino Communications. Additional UART/USART connections are available
|
|
* on the Arduino Communications connection J505:
|
|
*
|
|
* ------ ------ ------- ------- --------
|
|
* Pin on SAME70 Arduino Arduino SAME70
|
|
* J503 PIO Name Pin Function
|
|
* ------ ------ ------- ------- --------
|
|
* 3 PD18 RX1 0 URXD4
|
|
* 4 PD19 TX1 0 UTXD4
|
|
* 5 PD15 RX2 0 RXD2
|
|
* 6 PD16 TX2 0 TXD2
|
|
* 7 PB0 RX3 0 RXD0
|
|
* 8 PB1 TX3 1 TXD0
|
|
* ------ ------ ------- ------- --------
|
|
*
|
|
* There are alternative pin selections only for UART4 TXD:
|
|
*/
|
|
|
|
#define GPIO_UART4_TXD GPIO_UART4_TXD_1
|
|
|
|
/* - SAMV7-XULT EXTn connectors. USART pins are also available the EXTn
|
|
* connectors. The following are labelled in the User Guide for USART
|
|
* functionality:
|
|
*
|
|
* ---- -------- ------ --------
|
|
* EXT1 EXTI1 SAME70 SAME70
|
|
* Pin Name PIO Function
|
|
* ---- -------- ------ --------
|
|
* 13 USART_RX PB00 RXD0
|
|
* 14 USART_TX PB01 TXD0
|
|
*
|
|
* ---- -------- ------ --------
|
|
* EXT2 EXTI2 SAME70 SAME70
|
|
* Pin Name PIO Function
|
|
* ---- -------- ------ --------
|
|
* 13 USART_RX PA21 RXD1
|
|
* 14 USART_TX PB04 TXD1
|
|
*
|
|
* There are no alternative pin selections for USART0 or USART1.
|
|
*/
|
|
|
|
/* - VCOM. The Virtual Com Port gateway is available on USART1:
|
|
*
|
|
* ------ --------
|
|
* SAME70 SAME70
|
|
* PIO Function
|
|
* ------ --------
|
|
* PB04 TXD1
|
|
* PA21 RXD1
|
|
* ------ --------
|
|
*
|
|
* There are no alternative pin selections for USART1.
|
|
*/
|
|
|
|
/* MCAN1
|
|
*
|
|
* SAM E70 Xplained has two MCAN modules that performs communication according
|
|
* to ISO11898-1 (Bosch CAN specification 2.0 part A,B) and Bosch CAN FD
|
|
* specification V1.0. MCAN1 is connected to an on-board ATA6561 CAN physical-layer
|
|
* transceiver.
|
|
*
|
|
* ------- -------- -------- -------------
|
|
* SAM E70 FUNCTION ATA6561 SHARED
|
|
* PIN FUNCTION FUNCTIONALITY
|
|
* ------- -------- -------- -------------
|
|
* PC14 CANTX1 TXD Shield
|
|
* PC12 CANRX1 RXD Shield
|
|
* ------- -------- -------- -------------
|
|
*/
|
|
|
|
#define GPIO_MCAN1_TX GPIO_MCAN1_TX_2
|
|
#define GPIO_MCAN1_RX GPIO_MCAN1_RX_2
|
|
|
|
/************************************************************************************
|
|
* Public Types
|
|
************************************************************************************/
|
|
|
|
/************************************************************************************
|
|
* Public Data
|
|
************************************************************************************/
|
|
|
|
#ifndef __ASSEMBLY__
|
|
|
|
#undef EXTERN
|
|
#if defined(__cplusplus)
|
|
#define EXTERN extern "C"
|
|
extern "C"
|
|
{
|
|
#else
|
|
#define EXTERN extern
|
|
#endif
|
|
|
|
/************************************************************************************
|
|
* Public Functions
|
|
************************************************************************************/
|
|
|
|
/************************************************************************************
|
|
* Name: sam_lcdclear
|
|
*
|
|
* Description:
|
|
* This is a non-standard LCD interface just for the SAM4e-EK board. Because
|
|
* of the various rotations, clearing the display in the normal way by writing a
|
|
* sequences of runs that covers the entire display can be very slow. Here the
|
|
* display is cleared by simply setting all GRAM memory to the specified color.
|
|
*
|
|
************************************************************************************/
|
|
|
|
void sam_lcdclear(uint16_t color);
|
|
|
|
#undef EXTERN
|
|
#if defined(__cplusplus)
|
|
}
|
|
#endif
|
|
|
|
#endif /* __ASSEMBLY__ */
|
|
#endif /* __CONFIGS_SAME70_XPLAINED_INCLUDE_BOARD_H */
|