nuttx/boards/arm/cxd56xx/spresense/scripts/Make.defs
Alin Jerpelea 077ef70b0c cxd56xx improvements (#48)
* arch: cxd56xx: Add size limitation for I2C SCU xfer

This is a fw restriction, unroll loop because it can be transfer
up to 16 bytes.

* arch: cxd56xx: Fix lack of leave_critical_section

add the missing leave_critical_section

* arch: cxd56xx: Remove unnecessary file

this header is duplicate and we can remove it

* arch: cxd56xx: Cosmetic change

remove space after function

* arch: cxd56xx: update topreg registers

the topreg registers are updated to match the cxd5602 HW

* arch: cxd56xx: Add voltage setting for low battery notification

Add voltage setting for low battery notification

* arch: cxd56xx: Improve perfomance of SD card

Improve a problem that the clock of SD Host Controller is lower than the
expected value in SDR25 transfer mode.

* arch: cxd56xx: Cosmetic changes

cleanup to comply with coding standard

* boards: cxd56xx: Cosmetic changes

updates to comply with coding standard

* boards: cxd56xx: Fix SD card cannot mount issue

SD card cannot mount when connecting and disconnecting three times
or more due to wrong state of parameter 'initialized'.

This change enables to skip swtching initialized state when mount
failed.
2020-01-07 11:21:58 -03:00

153 lines
5.5 KiB
Plaintext

############################################################################
# boards/arm/cxd56xx/spresense/scripts/Make.defs
#
# Copyright (C) 2014 Gregory Nutt. All rights reserved.
# Author: Gregory Nutt <gnutt@nuttx.org>
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in
# the documentation and/or other materials provided with the
# distribution.
# 3. Neither the name NuttX nor the names of its contributors may be
# used to endorse or promote products derived from this software
# without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
############################################################################
include ${TOPDIR}/.config
include ${TOPDIR}/tools/Config.mk
include ${TOPDIR}/arch/arm/src/armv7-m/Toolchain.defs
# Setup for the kind of memory that we are executing from
LDSCRIPT = ramconfig.ld
ifeq ($(WINTOOL),y)
# Windows-native toolchains
DIRLINK = $(TOPDIR)/tools/copydir.sh
DIRUNLINK = $(TOPDIR)/tools/unlink.sh
MKDEP = $(TOPDIR)/tools/mkwindeps.sh
ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}"
ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}"
ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/boards/$(CONFIG_ARCH)/$(CONFIG_ARCH_CHIP)/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)}"
else
# Linux/Cygwin-native toolchain
MKDEP = $(TOPDIR)/tools/mkdeps$(HOSTEXEEXT)
ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
ARCHSCRIPT = -T$(TOPDIR)/boards/$(CONFIG_ARCH)/$(CONFIG_ARCH_CHIP)/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)
endif
CC = $(CROSSDEV)gcc
CXX = $(CROSSDEV)g++
CPP = $(CROSSDEV)gcc -E
LD = $(CROSSDEV)ld
AR = $(ARCROSSDEV)ar rcs
NM = $(ARCROSSDEV)nm
OBJCOPY = $(CROSSDEV)objcopy
OBJDUMP = $(CROSSDEV)objdump
STRIP = $(CROSSDEV)strip
MKNXFLAT = mknxflat
LDNXFLAT = ldnxflat
ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'}
ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1}
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
ARCHOPTIMIZATION = -g
endif
ifneq ($(CONFIG_DEBUG_NOOPT),y)
ARCHOPTIMIZATION += $(MAXOPTIMIZATION) -fno-strict-aliasing -fno-strength-reduce -fomit-frame-pointer
endif
ARCHCFLAGS = -fno-builtin -mabi=aapcs -ffunction-sections -fdata-sections
ARCHCXXFLAGS = -fno-builtin -fno-exceptions -fno-rtti -std=c++98
ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow -Wundef
ARCHWARNINGSXX = -Wall -Wshadow -Wundef
ARCHDEFINES =
ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10
CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS)
CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS)
CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES)
AFLAGS = $(CFLAGS) -D__ASSEMBLY__
NXFLATLDFLAGS1 = -r -d -warn-common
NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat-pcrel.ld -no-check-sections
LDNXFLATFLAGS = -e main -s 2048
# Loadable module definitions
CMODULEFLAGS = $(CFLAGS) -mlong-calls # --target1-abs
LDMODULEFLAGS = -r -e module_initialize
ifeq ($(WINTOOL),y)
LDMODULEFLAGS += -T "${shell cygpath -w $(TOPDIR)/sched/module/gnu-elf.ld}"
else
LDMODULEFLAGS += -T $(TOPDIR)/sched/module/gnu-elf.ld
endif
# ELF module definitions
CELFFLAGS = $(CFLAGS)
CXXELFFLAGS = $(CXXFLAGS)
LDELFFLAGS = -r -e main
ifeq ($(WINTOOL),y)
LDELFFLAGS += -T "${shell cygpath -w $(TOPDIR)/boards/$(CONFIG_ARCH)/$(CONFIG_ARCH_CHIP)/$(CONFIG_ARCH_BOARD)/scripts/gnu-elf.ld}"
else
LDELFFLAGS += -T $(TOPDIR)/boards/$(CONFIG_ARCH)/$(CONFIG_ARCH_CHIP)/$(CONFIG_ARCH_BOARD)/scripts/gnu-elf.ld
endif
ASMEXT = .S
OBJEXT = .o
LIBEXT = .a
EXEEXT =
LDFLAGS += --gc-sections
ifneq ($(CROSSDEV),arm-nuttx-elf-)
LDFLAGS += -nostartfiles -nodefaultlibs
endif
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
CFLAGS += -gdwarf-3
CXXFLAGS += -gdwarf-3
LDFLAGS += -g
endif
# Output map file with cross reference table
ifeq ($(WINTOOL),y)
LDFLAGS += -Map="${shell cygpath -w $(TOPDIR)/nuttx.map}" --cref
else
LDFLAGS += -Map=$(TOPDIR)/nuttx.map --cref
endif
HOSTCC = gcc
HOSTINCLUDES = -I.
HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -Wundef -g -pipe
HOSTLDFLAGS =