nuttx/boards/risc-v/mpfs/icicle/scripts/Make.defs
Eero Nurkkala 3afc83abc7 risc-v/mpfs: ihc: reorganize ihc
Currently the IHC (Inter Hart Communication) depends on OpenAMP and
rptun.  However, the bootloader portion of the IHC doesn't need
either of them.  Now they are wasting a lot of bootloader space.

Reorganize the bootloader portion into a separate file 'mpfs_ihc_sbi.c'.
This file contains the OpenSBI vendor extensions, or the only required
functionalities for the bootloader.  On the other hand, 'mpfs_ihc.c'
contains the non-bootloader code.

This patch also makes it possible to utilize 2 RPMSG channels.  This
has been tested so that 2 separate NuttXs on harts 1 and 2 communicate
with Linux kernel that runs on harts 3 and 4.

New configuration files are added as well:
  - rpmsg-ch1:  sample config for RPMSG
  - rpmsg-ch2:  sample config for another RPMSG channel
  - rpmsg-sbi:  sample bootloader config for RPMSG/OpenSBI

Signed-off-by: Eero Nurkkala <eero.nurkkala@offcode.fi>
2022-11-02 21:44:52 +08:00

85 lines
2.8 KiB
Plaintext

############################################################################
# boards/risc-v/mpfs/icicle/scripts/Make.defs
#
# Licensed to the Apache Software Foundation (ASF) under one or more
# contributor license agreements. See the NOTICE file distributed with
# this work for additional information regarding copyright ownership. The
# ASF licenses this file to you under the Apache License, Version 2.0 (the
# "License"); you may not use this file except in compliance with the
# License. You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
# License for the specific language governing permissions and limitations
# under the License.
#
############################################################################
include $(TOPDIR)/.config
include $(TOPDIR)/tools/Config.mk
include $(TOPDIR)/tools/mpfs/Config.mk
include $(TOPDIR)/arch/risc-v/src/common/Toolchain.defs
LDMEMORY =
ifeq ($(CONFIG_MPFS_BOOTLOADER),y)
ifeq ($(CONFIG_MPFS_OPENSBI),y)
LDSCRIPT = ld-envm-opensbi.script
else
LDSCRIPT = ld-envm.script
endif
else ifeq ($(CONFIG_BUILD_PROTECTED),y)
LDMEMORY = memory.ld
LDSCRIPT = kernel-space.ld
else ifeq ($(CONFIG_BUILD_KERNEL),y)
LDSCRIPT = ld-kernel.script
else
ifeq ($(CONFIG_MPFS_IHC_CLIENT),y)
ifeq ($(CONFIG_MPFS_IHC_RPMSG_CH2),y)
LDSCRIPT = ld-ihc-ch2.script
else
LDSCRIPT = ld-ihc.script
endif
else
LDSCRIPT = ld.script
endif
endif
ifneq ($(LDMEMORY),)
ARCHSCRIPT += $(BOARD_DIR)$(DELIM)scripts$(DELIM)$(LDMEMORY)
endif
ARCHSCRIPT += $(BOARD_DIR)$(DELIM)scripts$(DELIM)$(LDSCRIPT)
# The following options are for the toolchain from T-HEAD.
# For more info ahout the T-HEAD ISA extensions, please refer to the MPFS user guide.
# ARCHCPUFLAGS = -march=rv64gcxthead -mabi=lp64d -mcmodel=medany
# TODO: We are not going to enable this at this time for the CI compatibility.
ARCHCPUFLAGS += -mcmodel=medany
CFLAGS = $(ARCHCFLAGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRAFLAGS) -pipe
CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS)
CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) $(EXTRAFLAGS) -pipe
CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS)
CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRAFLAGS)
AFLAGS += $(CFLAGS) -D__ASSEMBLY__
# Loadable module definitions
CMODULEFLAGS = $(CFLAGS)
LDMODULEFLAGS = -r -e module_initialize
LDMODULEFLAGS += -T $(call CONVERT_PATH,$(TOPDIR)/libs/libc/modlib/gnu-elf.ld)
# ELF module definitions
CELFFLAGS = $(CFLAGS)
CXXELFFLAGS = $(CXXFLAGS)
LDELFFLAGS = -r -e main
LDELFFLAGS += -T $(call CONVERT_PATH,$(TOPDIR)/binfmt/libelf/gnu-elf.ld)