nuttx

analog

…

audio

Rename kumalloc to kumm_malloc and kuzalloc to kumm_zalloc for consistency with other naming

2014-08-31 16:24:24 -06:00

binfmt

Oops.. part of the last change will still in the editor

2014-11-12 18:33:07 -06:00

crypto

Move crypto header files from include/crypto to include/nuttx/crypto

2014-07-03 18:35:08 -06:00

eeprom

Add support for ST Micro EEPROM device geometries. From Sebastien Lorquet

2014-12-05 09:13:34 -06:00

fs

Fixes warning about block_operations not being defined. From David Sidrane.

2014-12-30 06:19:30 -06:00

input

Update the ADXL345 interface following the current interface scheme

2014-12-16 11:45:28 -06:00

lcd

ili9341: update interface control definitions

2014-12-19 13:52:40 -06:00

mm

MM: Minimum memory allocation must to up to 32 if sizeof pointer is 8-bytes

2014-11-02 12:11:20 -06:00

mtd

Added forward reference to eliminate warnings. From David Sidrane.

2014-12-30 06:20:40 -06:00

net

Networking: Fix to ICMPv6 logic: Needs to set source and destination address in the Ethernet header

2015-01-19 14:57:55 -06:00

nx

Lots of fonts that derive from X11-misc-fixed-* fonts. Converted for use by NuttX by Pierre-Noel Bouteville

2014-12-10 17:11:23 -06:00

power

…

sensors

Update ChangeLog

2015-01-06 10:52:05 -06:00

sercomm

…

serial

STM32 Serial: PX4 HW workarround for flaky STM32 RTS. From David Sidrane

2014-12-27 18:58:18 -06:00

spi

Add ADXL345 accelerometer driver. From Alan Carvalho de Assis

2014-12-16 08:16:53 -06:00

syslog

ARMv7: Add support to use ITM for SYSLOG debug output

2014-10-22 09:03:00 -06:00

usb

USB host drivers: Change all parmeters named class to usbclass to avoid C++ conflicts

2015-01-11 08:05:09 -06:00

video

STM32 LTDC: Move ltdc.h from include/nuttx/video to arch/arm/include/stm32; Trivial updates after general review

2014-12-19 14:52:17 -06:00

wireless

Freedom KL25Z: Update the CC3000 support to use the current CC300 interfaces. From Alan Carvalho de Assis

2014-12-18 13:52:01 -06:00

.gitignore

…

addrenv.h

Move include/nuttx/mm.h to include/nuttx/mm/mm.h

2014-09-24 07:29:09 -06:00

arch.h

Fixes to tickless operation code. From Brandon Warhurst

2014-10-23 06:41:31 -06:00

ascii.h

Add basic data structures that will allow us to move named semaphore support out of the OS and into the VFS (not complete).

2014-09-28 10:15:33 -06:00

can.h

…

clock.h

last change alters semantics of __HAVE_KERNEL_GLOBALS

2014-08-30 14:44:48 -06:00

compiler.h

Defines inline functions as not instrumented - this is relevant for anyone using instrumentation. From Lorenz Meier.

2014-11-12 07:32:36 -06:00

configdata.h

Add basic data structures that will allow us to move named semaphore support out of the OS and into the VFS (not complete).

2014-09-28 10:15:33 -06:00

float.h

…

i2c.h

maXTouch: Check for successful memory allocation was backward

2014-07-07 09:55:39 -06:00

init.h

Add basic data structures that will allow us to move named semaphore support out of the OS and into the VFS (not complete).

2014-09-28 10:15:33 -06:00

irq.h

Add basic data structures that will allow us to move named semaphore support out of the OS and into the VFS (not complete).

2014-09-28 10:15:33 -06:00

kmalloc.h

Move include/nuttx/mm.h to include/nuttx/mm/mm.h

2014-09-24 07:29:09 -06:00

kthread.h

Add basic data structures that will allow us to move named semaphore support out of the OS and into the VFS (not complete).

2014-09-28 10:15:33 -06:00

lib.h

Add basic data structures that will allow us to move named semaphore support out of the OS and into the VFS (not complete).

2014-09-28 10:15:33 -06:00

math.h

Change double_t to double in rint. Add rintf and rintl while we are at it

2014-06-28 10:14:29 -06:00

mmcsd.h

Add basic data structures that will allow us to move named semaphore support out of the OS and into the VFS (not complete).

2014-09-28 10:15:33 -06:00

mqueue.h

Repartition some message queue logic: sched/mqueue should have all mqueue knowledge; fs/mqueue should deal only with inodes

2014-09-30 08:03:39 -06:00

page.h

Add basic data structures that will allow us to move named semaphore support out of the OS and into the VFS (not complete).

2014-09-28 10:15:33 -06:00

pgalloc.h

Add basic data structures that will allow us to move named semaphore support out of the OS and into the VFS (not complete).

2014-09-28 10:15:33 -06:00

poff.h

Fix some cloned errors in SAM GPIO interrupt setup

2014-07-07 15:54:37 -06:00

progmem.h

STM32 FLASH fixes: use size_t instead of uint16_t, make interface more generic. From Freddie Chopin

2014-08-28 09:11:20 -06:00

pthread.h

Add basic data structures that will allow us to move named semaphore support out of the OS and into the VFS (not complete).

2014-09-28 10:15:33 -06:00

pwm.h

Add basic data structures that will allow us to move named semaphore support out of the OS and into the VFS (not complete).

2014-09-28 10:15:33 -06:00

regex.h

Add basic data structures that will allow us to move named semaphore support out of the OS and into the VFS (not complete).

2014-09-28 10:15:33 -06:00

rtc.h

…

rwbuffer.h

Addition rwbuffer interfaces should not be enabled unless they are needed; if rwbuffer support is enabled, it should not be unconditionally enabled in SMART and FTL

2014-07-11 16:19:17 -06:00

sched.h

strncpy will not copy the terminating \0 into the destination if the source is larger than the size of the destination. Ensure that the last byte is always zero and let strncpy only copy CONFIG_TASK_NAME_SIZE bytes. The issue of unterminated names can be observed in ps when creating a pthread while CONFIG_TASK_NAME_SIZE is set to 8.

2014-12-17 12:24:02 -06:00

scsi.h

Add basic data structures that will allow us to move named semaphore support out of the OS and into the VFS (not complete).

2014-09-28 10:15:33 -06:00

sdio.h

STM32 SDIO: CONFIG_MMCSD_SDIOWAIT_WRCOMPLETE should not be available unless CONFIG_MMCSD_SDIO=y

2015-01-08 18:12:06 -06:00

semaphore.h

Complete re-implementation of mq_close

2014-09-29 15:33:34 -06:00

spawn.h

…

stdarg.h

…

streams.h

Implement setlogmask(); move some syslog logic from libc/syslog to fs/syslog

2014-10-08 19:08:26 -06:00

time.h

Add basic data structures that will allow us to move named semaphore support out of the OS and into the VFS (not complete).

2014-09-28 10:15:33 -06:00

timer.h

…

tree.h

…

userspace.h

Rename CONFIG_SCHED_USRWORK to CONFIG_LIB_USRWORK

2014-10-11 15:59:40 -06:00

vt100.h

Add ANSI/VT100 color codes

2014-11-10 15:10:57 -06:00

watchdog.h

SAMA5 T/C: Can now handle non-constant BOARD_MCK_FREQUENCY. Also now supports methods to attach user interrupt handlers

2014-08-09 10:30:45 -06:00

wdog.h

Add support for statically allocated watchdog timer structures

2014-08-22 08:46:34 -06:00

wqueue.h

Fix warning caused by missing comment closing */. From David Sidrane.

2014-12-30 06:22:18 -06:00