87cf5c58ae
Squashed commit of the following:
Author: Gregory Nutt <gnutt@nuttx.org>
Ran nxstyle against many of the affected files. But this job was too big for today. Many of the network drivers under arch are highly non-compiant and generate many, many faults from nxstyle. Those will have to be visited again another day.
Author: Xiang Xiao <xiaoxiang@xiaomi.com>
This effects all network drivers as well as timing related portions of net/: devif_poll_tcp_timer shouldn't be skipped in the multiple card case. devif_timer will be called multiple time in one period if the multiple card exist, the elapsed time calculated for the first callback is right, but the flowing callback in the same period is wrong(very short) because the global variable g_polltimer is used in the calculation. So let's pass the delay time to devif_timer and remove g_polltimer.
1073 lines
31 KiB
C
1073 lines
31 KiB
C
/****************************************************************************
|
|
* wireless/pktradio/pktradio_loopback.c
|
|
*
|
|
* Copyright (C) 2017 Gregory Nutt. All rights reserved.
|
|
* Author: Gregory Nutt <gnutt@nuttx.org>
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
*
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in
|
|
* the documentation and/or other materials provided with the
|
|
* distribution.
|
|
* 3. Neither the name NuttX nor the names of its contributors may be
|
|
* used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
|
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
|
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
|
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
|
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
|
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
|
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
* POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
****************************************************************************/
|
|
|
|
/****************************************************************************
|
|
* Included Files
|
|
****************************************************************************/
|
|
|
|
#include <nuttx/config.h>
|
|
|
|
#include <stdint.h>
|
|
#include <stdbool.h>
|
|
#include <string.h>
|
|
#include <errno.h>
|
|
#include <assert.h>
|
|
#include <debug.h>
|
|
|
|
#include <arpa/inet.h>
|
|
#include <net/if.h>
|
|
|
|
#include <nuttx/wdog.h>
|
|
#include <nuttx/wqueue.h>
|
|
#include <nuttx/mm/iob.h>
|
|
#include <nuttx/net/net.h>
|
|
#include <nuttx/net/ip.h>
|
|
#include <nuttx/net/radiodev.h>
|
|
#include <nuttx/net/sixlowpan.h>
|
|
#include <nuttx/wireless/pktradio.h>
|
|
|
|
#ifdef CONFIG_PKTRADIO_LOOPBACK
|
|
|
|
/****************************************************************************
|
|
* Pre-processor Definitions
|
|
****************************************************************************/
|
|
|
|
/* We need to have the work queue to handle SPI interrupts */
|
|
|
|
#if !defined(CONFIG_SCHED_WORKQUEUE)
|
|
# error Worker thread support is required (CONFIG_SCHED_WORKQUEUE)
|
|
#else
|
|
# if defined(CONFIG_SCHED_LPWORK)
|
|
# define LPBKWORK LPWORK
|
|
# elif defined(CONFIG_SCHED_HPWORK)
|
|
# define LPBKWORK HPWORK
|
|
# else
|
|
# error Neither CONFIG_SCHED_LPWORK nor CONFIG_SCHED_HPWORK defined
|
|
# endif
|
|
#endif
|
|
|
|
#ifndef CONFIG_WIRELESS_PKTRADIO
|
|
# error CONFIG_WIRELESS_PKTRADIO=y is required.
|
|
#endif
|
|
|
|
#ifndef CONFIG_NET_6LOWPAN
|
|
# error CONFIG_NET_6LOWPAN=y is required.
|
|
#endif
|
|
|
|
#if (CONFIG_PKTRADIO_ADDRLEN != 1) && (CONFIG_PKTRADIO_ADDRLEN != 2) && \
|
|
(CONFIG_PKTRADIO_ADDRLEN != 8)
|
|
# error No support for CONFIG_PKTRADIO_ADDRLEN other than {1,2,8}
|
|
#endif
|
|
|
|
/* TX poll delay = 1 seconds. CLK_TCK is the number of clock ticks per second */
|
|
|
|
#define LO_WDDELAY (1*CLK_TCK)
|
|
|
|
/* Fake value for MAC header length */
|
|
|
|
#if CONFIG_IOB_BUFSIZE > 40
|
|
# define MAC_HDRLEN 4
|
|
#else
|
|
# define MAC_HDRLEN 0
|
|
#endif
|
|
|
|
/****************************************************************************
|
|
* Private Types
|
|
****************************************************************************/
|
|
|
|
/* The lo_driver_s encapsulates all state information for a single hardware
|
|
* interface
|
|
*/
|
|
|
|
struct lo_driver_s
|
|
{
|
|
bool lo_bifup; /* true:ifup false:ifdown */
|
|
bool lo_pending; /* True: TX poll pending */
|
|
uint8_t lo_panid[2]; /* Fake PAN ID for testing */
|
|
WDOG_ID lo_polldog; /* TX poll timer */
|
|
struct work_s lo_work; /* For deferring poll work to the work queue */
|
|
FAR struct iob_s *lo_head; /* Head of IOBs queued for loopback */
|
|
FAR struct iob_s *lo_tail; /* Tail of IOBs queued for loopback */
|
|
|
|
/* This holds the information visible to the NuttX network */
|
|
|
|
struct radio_driver_s lo_radio; /* Interface understood by the network */
|
|
};
|
|
|
|
/****************************************************************************
|
|
* Private Data
|
|
****************************************************************************/
|
|
|
|
static struct lo_driver_s g_loopback;
|
|
#ifdef CONFIG_NET_6LOWPAN
|
|
static struct sixlowpan_reassbuf_s g_iobuffer;
|
|
#endif
|
|
|
|
static uint8_t g_mac_addr[CONFIG_PKTRADIO_ADDRLEN] =
|
|
{
|
|
#if CONFIG_PKTRADIO_ADDRLEN == 1
|
|
0xab
|
|
#elif CONFIG_PKTRADIO_ADDRLEN == 2
|
|
0xab, 0xcd
|
|
#elif CONFIG_PKTRADIO_ADDRLEN == 8
|
|
0x0c, 0xfa, 0xde, 0x00, 0xde, 0xad, 0xbe, 0xef
|
|
#endif
|
|
};
|
|
|
|
/****************************************************************************
|
|
* Private Function Prototypes
|
|
****************************************************************************/
|
|
|
|
/* Utility functions */
|
|
|
|
static void lo_addr2ip(FAR struct net_driver_s *dev);
|
|
static inline void lo_netmask(FAR struct net_driver_s *dev);
|
|
|
|
/* Polling logic */
|
|
|
|
static int lo_loopback(FAR struct net_driver_s *dev);
|
|
static void lo_loopback_work(FAR void *arg);
|
|
static void lo_poll_work(FAR void *arg);
|
|
static void lo_poll_expiry(int argc, wdparm_t arg, ...);
|
|
|
|
/* NuttX callback functions */
|
|
|
|
static int lo_ifup(FAR struct net_driver_s *dev);
|
|
static int lo_ifdown(FAR struct net_driver_s *dev);
|
|
static void lo_txavail_work(FAR void *arg);
|
|
static int lo_txavail(FAR struct net_driver_s *dev);
|
|
#ifdef CONFIG_NET_MCASTGROUP
|
|
static int lo_addmac(FAR struct net_driver_s *dev, FAR const uint8_t *mac);
|
|
static int lo_rmmac(FAR struct net_driver_s *dev, FAR const uint8_t *mac);
|
|
#endif
|
|
#ifdef CONFIG_NETDEV_IOCTL
|
|
static int lo_ioctl(FAR struct net_driver_s *dev, int cmd,
|
|
unsigned long arg);
|
|
#endif
|
|
static int lo_get_mhrlen(FAR struct radio_driver_s *netdev,
|
|
FAR const void *meta);
|
|
static int lo_req_data(FAR struct radio_driver_s *netdev,
|
|
FAR const void *meta, FAR struct iob_s *framelist);
|
|
static int lo_properties(FAR struct radio_driver_s *netdev,
|
|
FAR struct radiodev_properties_s *properties);
|
|
|
|
/****************************************************************************
|
|
* Private Functions
|
|
****************************************************************************/
|
|
|
|
/****************************************************************************
|
|
* Name: lo_addr2ip
|
|
*
|
|
* Description:
|
|
* Create a MAC-based IP address from the IEEE 802.15.14 short or extended
|
|
* address assigned to the node.
|
|
*
|
|
* 128 112 96 80 64 48 32 16
|
|
* ---- ---- ---- ---- ---- ---- ---- ----
|
|
* fe80 0000 0000 0000 0000 00ff fe00 xxxx 2-byte short address IEEE 48-bit MAC
|
|
* fe80 0000 0000 0000 xxxx xxxx xxxx xxxx 8-byte extended address IEEE EUI-64
|
|
*
|
|
****************************************************************************/
|
|
|
|
static void lo_addr2ip(FAR struct net_driver_s *dev)
|
|
{
|
|
/* Set the MAC address as the saddr */
|
|
|
|
dev->d_mac.radio.nv_addrlen = CONFIG_PKTRADIO_ADDRLEN;
|
|
memcpy(dev->d_mac.radio.nv_addr, g_mac_addr, CONFIG_PKTRADIO_ADDRLEN);
|
|
|
|
/* Set the IP address */
|
|
|
|
dev->d_ipv6addr[0] = HTONS(0xfe80);
|
|
dev->d_ipv6addr[1] = 0;
|
|
dev->d_ipv6addr[2] = 0;
|
|
dev->d_ipv6addr[3] = 0;
|
|
|
|
#if CONFIG_PKTRADIO_ADDRLEN == 1
|
|
/* Set the IP address based on the 1 byte address */
|
|
|
|
dev->d_ipv6addr[4] = 0;
|
|
dev->d_ipv6addr[5] = HTONS(0x00ff);
|
|
dev->d_ipv6addr[6] = HTONS(0xfe00);
|
|
dev->d_ipv6addr[7] = (uint16_t)g_mac_addr[0] << 8;
|
|
|
|
#elif CONFIG_PKTRADIO_ADDRLEN == 2
|
|
/* Set the IP address based on the 2 byte address */
|
|
|
|
dev->d_ipv6addr[4] = 0;
|
|
dev->d_ipv6addr[5] = HTONS(0x00ff);
|
|
dev->d_ipv6addr[6] = HTONS(0xfe00);
|
|
dev->d_ipv6addr[7] = (uint16_t)g_mac_addr[0] << 8 | (uint16_t)g_mac_addr[1];
|
|
|
|
#elif CONFIG_PKTRADIO_ADDRLEN == 8
|
|
/* Set the IP address based on the 8-byte address */
|
|
|
|
dev->d_ipv6addr[4] = (uint16_t)g_mac_addr[0] << 8 | (uint16_t)g_mac_addr[1];
|
|
dev->d_ipv6addr[5] = (uint16_t)g_mac_addr[2] << 8 | (uint16_t)g_mac_addr[3];
|
|
dev->d_ipv6addr[6] = (uint16_t)g_mac_addr[4] << 8 | (uint16_t)g_mac_addr[5];
|
|
dev->d_ipv6addr[7] = (uint16_t)g_mac_addr[6] << 8 | (uint16_t)g_mac_addr[7];
|
|
#endif
|
|
}
|
|
|
|
/****************************************************************************
|
|
* Name: lo_netmask
|
|
*
|
|
* Description:
|
|
* Create a netmask of a MAC-based IP address which may be based on either
|
|
* the IEEE 802.15.14 short or extended address of the MAC.
|
|
*
|
|
* 128 112 96 80 64 48 32 16
|
|
* ---- ---- ---- ---- ---- ---- ---- ----
|
|
* fe80 0000 0000 0000 0000 00ff fe00 xxxx 2-byte short address IEEE 48-bit MAC
|
|
* fe80 0000 0000 0000 xxxx xxxx xxxx xxxx 8-byte extended address IEEE EUI-64
|
|
*
|
|
****************************************************************************/
|
|
|
|
static inline void lo_netmask(FAR struct net_driver_s *dev)
|
|
{
|
|
dev->d_ipv6netmask[0] = 0xffff;
|
|
dev->d_ipv6netmask[1] = 0xffff;
|
|
dev->d_ipv6netmask[2] = 0xffff;
|
|
dev->d_ipv6netmask[3] = 0xffff;
|
|
|
|
#if CONFIG_PKTRADIO_ADDRLEN == 1
|
|
dev->d_ipv6netmask[4] = 0xffff;
|
|
dev->d_ipv6netmask[5] = 0xffff;
|
|
dev->d_ipv6netmask[6] = 0xffff;
|
|
dev->d_ipv6netmask[7] = HTONS(0xff00);
|
|
|
|
#elif CONFIG_PKTRADIO_ADDRLEN == 2
|
|
dev->d_ipv6netmask[4] = 0xffff;
|
|
dev->d_ipv6netmask[5] = 0xffff;
|
|
dev->d_ipv6netmask[6] = 0xffff;
|
|
dev->d_ipv6netmask[7] = 0;
|
|
|
|
#elif CONFIG_PKTRADIO_ADDRLEN == 8
|
|
dev->d_ipv6netmask[4] = 0;
|
|
dev->d_ipv6netmask[5] = 0;
|
|
dev->d_ipv6netmask[6] = 0;
|
|
dev->d_ipv6netmask[7] = 0;
|
|
#endif
|
|
}
|
|
|
|
/****************************************************************************
|
|
* Name: lo_loopback
|
|
*
|
|
* Description:
|
|
* Check if the network has any outgoing packets ready to send. This is
|
|
* a callback from devif_poll() or devif_timer(). devif_poll() will be
|
|
* called only during normal TX polling.
|
|
*
|
|
* Input Parameters:
|
|
* dev - Reference to the NuttX driver state structure
|
|
*
|
|
* Returned Value:
|
|
* OK on success; a negated errno on failure
|
|
*
|
|
* Assumptions:
|
|
* May or may not be called from an interrupt handler. In either case,
|
|
* the network is locked.
|
|
*
|
|
****************************************************************************/
|
|
|
|
static int lo_loopback(FAR struct net_driver_s *dev)
|
|
{
|
|
FAR struct lo_driver_s *priv = (FAR struct lo_driver_s *)dev->d_private;
|
|
struct pktradio_metadata_s pktmeta;
|
|
FAR struct iob_s *iob;
|
|
int ret;
|
|
|
|
/* Create some fake metadata */
|
|
|
|
memset(&pktmeta, 0, sizeof(struct pktradio_metadata_s));
|
|
|
|
pktmeta.pm_src.pa_addrlen = CONFIG_PKTRADIO_ADDRLEN;
|
|
pktmeta.pm_dest.pa_addrlen = CONFIG_PKTRADIO_ADDRLEN;
|
|
|
|
/* On loopback the local address is both the source and destination. */
|
|
|
|
memcpy(pktmeta.pm_src.pa_addr, g_mac_addr, CONFIG_PKTRADIO_ADDRLEN);
|
|
memcpy(pktmeta.pm_dest.pa_addr, g_mac_addr, CONFIG_PKTRADIO_ADDRLEN);
|
|
|
|
/* Loop while there framelist to be sent, i.e., while the freme list is not
|
|
* emtpy. Sending, of course, just means relaying back through the network
|
|
* for this driver.
|
|
*/
|
|
|
|
while (priv->lo_head != NULL)
|
|
{
|
|
ninfo("Looping frame IOB %p\n", iob);
|
|
|
|
/* Increment statistics */
|
|
|
|
NETDEV_RXPACKETS(&priv->lo_radio.r_dev);
|
|
|
|
/* Remove the IOB from the queue */
|
|
|
|
iob = priv->lo_head;
|
|
priv->lo_head = iob->io_flink;
|
|
iob->io_flink = NULL;
|
|
|
|
/* Did the framelist become empty? */
|
|
|
|
if (priv->lo_head == NULL)
|
|
{
|
|
priv->lo_tail = NULL;
|
|
}
|
|
|
|
/* Make sure the our single packet buffer is attached */
|
|
|
|
priv->lo_radio.r_dev.d_buf = g_iobuffer.rb_buf;
|
|
|
|
/* Return the next frame to the network */
|
|
|
|
ninfo("Send frame %p to the network: Offset=%u Length=%u\n",
|
|
iob, iob->io_offset, iob->io_len);
|
|
|
|
ret = sixlowpan_input(&priv->lo_radio, iob, (FAR void *)&pktmeta);
|
|
|
|
/* Increment statistics */
|
|
|
|
NETDEV_TXPACKETS(&priv->lo_radio.r_dev);
|
|
|
|
if (ret < 0)
|
|
{
|
|
nerr("ERROR: sixlowpan_input returned %d\n", ret);
|
|
NETDEV_TXERRORS(&priv->lo_radio.r_dev);
|
|
NETDEV_ERRORS(&priv->lo_radio.r_dev);
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/****************************************************************************
|
|
* Name: lo_loopback_work
|
|
*
|
|
* Description:
|
|
* Perform loopback of received framelist.
|
|
*
|
|
* Input Parameters:
|
|
* arg - The argument passed when work_queue() as called.
|
|
*
|
|
* Returned Value:
|
|
* OK on success
|
|
*
|
|
* Assumptions:
|
|
* The network is locked
|
|
*
|
|
****************************************************************************/
|
|
|
|
static void lo_loopback_work(FAR void *arg)
|
|
{
|
|
FAR struct lo_driver_s *priv = (FAR struct lo_driver_s *)arg;
|
|
|
|
/* Perform the loopback */
|
|
|
|
net_lock();
|
|
(void)lo_loopback(&priv->lo_radio.r_dev);
|
|
net_unlock();
|
|
}
|
|
|
|
/****************************************************************************
|
|
* Name: lo_poll_work
|
|
*
|
|
* Description:
|
|
* Perform periodic polling from the worker thread
|
|
*
|
|
* Input Parameters:
|
|
* arg - The argument passed when work_queue() as called.
|
|
*
|
|
* Returned Value:
|
|
* OK on success
|
|
*
|
|
* Assumptions:
|
|
* The network is locked
|
|
*
|
|
****************************************************************************/
|
|
|
|
static void lo_poll_work(FAR void *arg)
|
|
{
|
|
FAR struct lo_driver_s *priv = (FAR struct lo_driver_s *)arg;
|
|
|
|
/* Perform the poll */
|
|
|
|
net_lock();
|
|
|
|
#ifdef CONFIG_NET_6LOWPAN
|
|
/* Make sure the our single packet buffer is attached */
|
|
|
|
priv->lo_radio.r_dev.d_buf = g_iobuffer.rb_buf;
|
|
#endif
|
|
|
|
/* And perform the poll */
|
|
|
|
(void)devif_timer(&priv->lo_radio.r_dev, LO_WDDELAY, lo_loopback);
|
|
|
|
/* Setup the watchdog poll timer again */
|
|
|
|
(void)wd_start(priv->lo_polldog, LO_WDDELAY, lo_poll_expiry, 1, priv);
|
|
net_unlock();
|
|
}
|
|
|
|
/****************************************************************************
|
|
* Name: lo_poll_expiry
|
|
*
|
|
* Description:
|
|
* Periodic timer handler. Called from the timer interrupt handler.
|
|
*
|
|
* Input Parameters:
|
|
* argc - The number of available arguments
|
|
* arg - The first argument
|
|
*
|
|
* Returned Value:
|
|
* None
|
|
*
|
|
* Assumptions:
|
|
* The network is locked.
|
|
*
|
|
****************************************************************************/
|
|
|
|
static void lo_poll_expiry(int argc, wdparm_t arg, ...)
|
|
{
|
|
FAR struct lo_driver_s *priv = (FAR struct lo_driver_s *)arg;
|
|
|
|
if (!work_available(&priv->lo_work) || priv->lo_head != NULL)
|
|
{
|
|
nwarn("WARNING: lo_work NOT available\n");
|
|
priv->lo_pending = true;
|
|
}
|
|
else
|
|
{
|
|
/* Schedule to perform the interrupt processing on the worker thread. */
|
|
|
|
priv->lo_pending = false;
|
|
work_queue(LPBKWORK, &priv->lo_work, lo_poll_work, priv, 0);
|
|
}
|
|
}
|
|
|
|
/****************************************************************************
|
|
* Name: lo_ifup
|
|
*
|
|
* Description:
|
|
* NuttX Callback: Bring up the Ethernet interface when an IP address is
|
|
* provided
|
|
*
|
|
* Input Parameters:
|
|
* dev - Reference to the NuttX driver state structure
|
|
*
|
|
* Returned Value:
|
|
* None
|
|
*
|
|
* Assumptions:
|
|
*
|
|
****************************************************************************/
|
|
|
|
static int lo_ifup(FAR struct net_driver_s *dev)
|
|
{
|
|
FAR struct lo_driver_s *priv = (FAR struct lo_driver_s *)dev->d_private;
|
|
|
|
ninfo("Bringing up: IPv6 %04x:%04x:%04x:%04x:%04x:%04x:%04x:%04x\n",
|
|
dev->d_ipv6addr[0], dev->d_ipv6addr[1], dev->d_ipv6addr[2],
|
|
dev->d_ipv6addr[3], dev->d_ipv6addr[4], dev->d_ipv6addr[5],
|
|
dev->d_ipv6addr[6], dev->d_ipv6addr[7]);
|
|
|
|
#if CONFIG_PKTRADIO_ADDRLEN == 1
|
|
ninfo(" Node: %02x\n",
|
|
dev->d_mac.radio.nv_addr[0]);
|
|
|
|
#elif CONFIG_PKTRADIO_ADDRLEN == 2
|
|
ninfo(" Node: %02x:%02x\n",
|
|
dev->d_mac.radio.nv_addr[0], dev->d_mac.radio.nv_addr[1]);
|
|
|
|
#elif CONFIG_PKTRADIO_ADDRLEN == 8
|
|
ninfo(" Node: %02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x PANID=%02x:%02x\n",
|
|
dev->d_mac.radio.nv_addr[0], dev->d_mac.radio.nv_addr[1],
|
|
dev->d_mac.radio.nv_addr[2], dev->d_mac.radio.nv_addr[3],
|
|
dev->d_mac.radio.nv_addr[4], dev->d_mac.radio.nv_addr[5],
|
|
dev->d_mac.radio.nv_addr[6], dev->d_mac.radio.nv_addr[7]);
|
|
#endif
|
|
|
|
/* Set and activate a timer process */
|
|
|
|
(void)wd_start(priv->lo_polldog, LO_WDDELAY, lo_poll_expiry,
|
|
1, (wdparm_t)priv);
|
|
|
|
priv->lo_bifup = true;
|
|
return OK;
|
|
}
|
|
|
|
/****************************************************************************
|
|
* Name: lo_ifdown
|
|
*
|
|
* Description:
|
|
* NuttX Callback: Stop the interface.
|
|
*
|
|
* Input Parameters:
|
|
* dev - Reference to the NuttX driver state structure
|
|
*
|
|
* Returned Value:
|
|
* None
|
|
*
|
|
* Assumptions:
|
|
*
|
|
****************************************************************************/
|
|
|
|
static int lo_ifdown(FAR struct net_driver_s *dev)
|
|
{
|
|
FAR struct lo_driver_s *priv = (FAR struct lo_driver_s *)dev->d_private;
|
|
|
|
ninfo("IP up: %u\n", priv->lo_bifup);
|
|
|
|
/* Cancel the TX poll timer and TX timeout timers */
|
|
|
|
wd_cancel(priv->lo_polldog);
|
|
|
|
/* Mark the device "down" */
|
|
|
|
priv->lo_bifup = false;
|
|
return OK;
|
|
}
|
|
|
|
/****************************************************************************
|
|
* Name: lo_txavail_work
|
|
*
|
|
* Description:
|
|
* Perform an out-of-cycle poll on the worker thread.
|
|
*
|
|
* Input Parameters:
|
|
* arg - Reference to the NuttX driver state structure (cast to void*)
|
|
*
|
|
* Returned Value:
|
|
* None
|
|
*
|
|
* Assumptions:
|
|
* Called on the higher priority worker thread.
|
|
*
|
|
****************************************************************************/
|
|
|
|
static void lo_txavail_work(FAR void *arg)
|
|
{
|
|
FAR struct lo_driver_s *priv = (FAR struct lo_driver_s *)arg;
|
|
|
|
ninfo("TX available work. IP up: %u\n", priv->lo_bifup);
|
|
|
|
/* Ignore the notification if the interface is not yet up */
|
|
|
|
net_lock();
|
|
if (priv->lo_bifup)
|
|
{
|
|
/* If so, then poll the network for new XMIT data */
|
|
|
|
#ifdef CONFIG_NET_6LOWPAN
|
|
/* Make sure the our single packet buffer is attached */
|
|
|
|
priv->lo_radio.r_dev.d_buf = g_iobuffer.rb_buf;
|
|
#endif
|
|
|
|
/* Then perform the poll */
|
|
|
|
(void)devif_poll(&priv->lo_radio.r_dev, lo_loopback);
|
|
}
|
|
|
|
net_unlock();
|
|
}
|
|
|
|
/****************************************************************************
|
|
* Name: lo_txavail
|
|
*
|
|
* Description:
|
|
* Driver callback invoked when new TX data is available. This is a
|
|
* stimulus perform an out-of-cycle poll and, thereby, reduce the TX
|
|
* latency.
|
|
*
|
|
* Input Parameters:
|
|
* dev - Reference to the NuttX driver state structure
|
|
*
|
|
* Returned Value:
|
|
* None
|
|
*
|
|
* Assumptions:
|
|
* Called in normal user mode
|
|
*
|
|
****************************************************************************/
|
|
|
|
static int lo_txavail(FAR struct net_driver_s *dev)
|
|
{
|
|
FAR struct lo_driver_s *priv = (FAR struct lo_driver_s *)dev->d_private;
|
|
|
|
ninfo("Available: %u\n", work_available(&priv->lo_work));
|
|
|
|
/* Is our single work structure available? It may not be if there are
|
|
* pending actions and we will have to ignore the Tx availability
|
|
* action.
|
|
*/
|
|
|
|
if (!work_available(&priv->lo_work) || priv->lo_head != NULL)
|
|
{
|
|
nwarn("WARNING: lo_work NOT available\n");
|
|
priv->lo_pending = true;
|
|
}
|
|
else
|
|
{
|
|
/* Schedule to perform the interrupt processing on the worker thread. */
|
|
|
|
priv->lo_pending = false;
|
|
work_queue(LPBKWORK, &priv->lo_work, lo_txavail_work, priv, 0);
|
|
}
|
|
|
|
return OK;
|
|
}
|
|
|
|
/****************************************************************************
|
|
* Name: lo_addmac
|
|
*
|
|
* Description:
|
|
* NuttX Callback: Add the specified MAC address to the hardware multicast
|
|
* address filtering
|
|
*
|
|
* Input Parameters:
|
|
* dev - Reference to the NuttX driver state structure
|
|
* mac - The MAC address to be added
|
|
*
|
|
* Returned Value:
|
|
* None
|
|
*
|
|
* Assumptions:
|
|
*
|
|
****************************************************************************/
|
|
|
|
#ifdef CONFIG_NET_MCASTGROUP
|
|
static int lo_addmac(FAR struct net_driver_s *dev, FAR const uint8_t *mac)
|
|
{
|
|
#if CONFIG_PKTRADIO_ADDRLEN == 1
|
|
ninfo("MAC: %02x\n", mac[0]);
|
|
|
|
#elif CONFIG_PKTRADIO_ADDRLEN == 2
|
|
ninfo("MAC: %02x:%02x\n", mac[0], mac[1]);
|
|
|
|
#elif CONFIG_PKTRADIO_ADDRLEN == 8
|
|
ninfo("MAC: %02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x\n",
|
|
mac[0], mac[1], mac[2], mac[3], mac[4], mac[5], mac[6], mac[7]);
|
|
#endif
|
|
|
|
/* There is no multicast support in the loopback driver */
|
|
|
|
return OK;
|
|
}
|
|
#endif
|
|
|
|
/****************************************************************************
|
|
* Name: lo_rmmac
|
|
*
|
|
* Description:
|
|
* NuttX Callback: Remove the specified MAC address from the hardware multicast
|
|
* address filtering
|
|
*
|
|
* Input Parameters:
|
|
* dev - Reference to the NuttX driver state structure
|
|
* mac - The MAC address to be removed
|
|
*
|
|
* Returned Value:
|
|
* None
|
|
*
|
|
* Assumptions:
|
|
*
|
|
****************************************************************************/
|
|
|
|
#ifdef CONFIG_NET_MCASTGROUP
|
|
static int lo_rmmac(FAR struct net_driver_s *dev, FAR const uint8_t *mac)
|
|
{
|
|
#if CONFIG_PKTRADIO_ADDRLEN == 1
|
|
ninfo("MAC: %02x\n", mac[0]);
|
|
|
|
#elif CONFIG_PKTRADIO_ADDRLEN == 2
|
|
ninfo("MAC: %02x:%02x\n", mac[0], mac[1]);
|
|
|
|
#elif CONFIG_PKTRADIO_ADDRLEN == 8
|
|
ninfo("MAC: %02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x\n",
|
|
mac[0], mac[1], mac[2], mac[3], mac[4], mac[5], mac[6], mac[7]);
|
|
#endif
|
|
|
|
/* There is no multicast support in the loopback driver */
|
|
|
|
return OK;
|
|
}
|
|
#endif
|
|
|
|
/****************************************************************************
|
|
* Name: macnet_ioctl
|
|
*
|
|
* Description:
|
|
* Handle network IOCTL commands directed to this device.
|
|
*
|
|
* Input Parameters:
|
|
* dev - Reference to the NuttX driver state structure
|
|
* cmd - The IOCTL command
|
|
* arg - The argument for the IOCTL command
|
|
*
|
|
* Returned Value:
|
|
* OK on success; Negated errno on failure.
|
|
*
|
|
* Assumptions:
|
|
*
|
|
****************************************************************************/
|
|
|
|
#ifdef CONFIG_NETDEV_IOCTL
|
|
static int lo_ioctl(FAR struct net_driver_s *dev, int cmd,
|
|
unsigned long arg)
|
|
{
|
|
FAR struct pktradio_ifreq_s *cmddata;
|
|
FAR struct lo_driver_s *priv;
|
|
int ret = -ENOTTY;
|
|
|
|
DEBUGASSERT(dev != NULL && dev->d_private != NULL && arg != 0ul);
|
|
priv = (FAR struct lo_driver_s *)dev->d_private;
|
|
cmddata = (FAR struct pktradio_ifreq_s *)((uintptr_t)arg);
|
|
|
|
switch (cmd)
|
|
{
|
|
/* SIOCPKTRADIOGGPROPS
|
|
* Description: Get the radio properties
|
|
* Input: Pointer to read-write instance of struct
|
|
* pktradio_ifreq_s
|
|
* Output: Properties returned in struct pktradio_ifreq_s
|
|
* instance
|
|
*/
|
|
|
|
case SIOCPKTRADIOGGPROPS:
|
|
{
|
|
FAR struct radio_driver_s *radio =
|
|
(FAR struct radio_driver_s *)dev;
|
|
FAR struct radiodev_properties_s *props =
|
|
(FAR struct radiodev_properties_s *)&cmddata->pifr_props;
|
|
|
|
ret = lo_properties(radio, props);
|
|
}
|
|
break;
|
|
|
|
/* SIOCPKTRADIOSNODE
|
|
* Description: Set the radio node address
|
|
* Input: Pointer to read-only instance of struct
|
|
* pktradio_ifreq_s
|
|
* Output: None
|
|
*/
|
|
|
|
case SIOCPKTRADIOSNODE:
|
|
{
|
|
FAR const struct pktradio_addr_s *newaddr =
|
|
(FAR const struct pktradio_addr_s *)&cmddata->pifr_hwaddr;
|
|
|
|
if (newaddr->pa_addrlen != 1)
|
|
{
|
|
ret = -EINVAL;
|
|
}
|
|
else
|
|
{
|
|
FAR struct netdev_varaddr_s *devaddr = &dev->d_mac.radio;
|
|
|
|
devaddr->nv_addrlen = 1;
|
|
devaddr->nv_addr[0] = newaddr->pa_addr[0];
|
|
#if CONFIG_PKTRADIO_ADDRLEN > 1
|
|
memset(&devaddr->pa_addr[1], 0, CONFIG_PKTRADIO_ADDRLEN - 1);
|
|
#endif
|
|
ret = OK;
|
|
}
|
|
}
|
|
break;
|
|
|
|
/* SIOCPKTRADIOGNODE
|
|
* Description: Get the radio node address
|
|
* Input: Pointer to read-write instance of
|
|
* struct pktradio_ifreq_s
|
|
* Output: Node address return in struct pktradio_ifreq_s
|
|
* instance
|
|
*/
|
|
|
|
case SIOCPKTRADIOGNODE:
|
|
{
|
|
FAR struct pktradio_addr_s *retaddr =
|
|
(FAR struct pktradio_addr_s *)&cmddata->pifr_hwaddr;
|
|
FAR const struct netdev_varaddr_s *devaddr = &dev->d_mac.radio;
|
|
|
|
retaddr->pa_addrlen = devaddr->nv_addrlen;
|
|
retaddr->pa_addr[0] = devaddr->nv_addr[0];
|
|
#if CONFIG_PKTRADIO_ADDRLEN > 1
|
|
memset(&addr->pa_addr[1], 0, CONFIG_PKTRADIO_ADDRLEN - 1);
|
|
#endif
|
|
ret = OK;
|
|
}
|
|
break;
|
|
|
|
default:
|
|
wlwarn("WARNING: Unrecognized IOCTL command: %02x\n", cmd);
|
|
break;
|
|
}
|
|
|
|
UNUSED(priv);
|
|
return ret;
|
|
}
|
|
#endif
|
|
|
|
/****************************************************************************
|
|
* Name: lo_get_mhrlen
|
|
*
|
|
* Description:
|
|
* Calculate the MAC header length given the frame meta-data.
|
|
*
|
|
* Input Parameters:
|
|
* netdev - The networkd device that will mediate the MAC interface
|
|
* meta - Obfuscated metadata structure needed to create the radio
|
|
* MAC header
|
|
*
|
|
* Returned Value:
|
|
* A non-negative MAC headeer length is returned on success; a negated
|
|
* errno value is returned on any failure.
|
|
*
|
|
****************************************************************************/
|
|
|
|
static int lo_get_mhrlen(FAR struct radio_driver_s *netdev,
|
|
FAR const void *meta)
|
|
{
|
|
return MAC_HDRLEN;
|
|
}
|
|
|
|
/****************************************************************************
|
|
* Name: lo_req_data
|
|
*
|
|
* Description:
|
|
* Requests the transfer of a list of frames to the MAC.
|
|
*
|
|
* Input Parameters:
|
|
* netdev - The networkd device that will mediate the MAC interface
|
|
* meta - Obfuscated metadata structure needed to create the radio
|
|
* MAC header
|
|
* framelist - Head of a list of frames to be transferred.
|
|
*
|
|
* Returned Value:
|
|
* Zero (OK) returned on success; a negated errno value is returned on
|
|
* any failure.
|
|
*
|
|
****************************************************************************/
|
|
|
|
static int lo_req_data(FAR struct radio_driver_s *netdev,
|
|
FAR const void *meta, FAR struct iob_s *framelist)
|
|
{
|
|
FAR struct lo_driver_s *priv;
|
|
FAR struct iob_s *iob;
|
|
|
|
DEBUGASSERT(netdev != NULL && netdev->r_dev.d_private != NULL);
|
|
priv = (FAR struct lo_driver_s *)netdev->r_dev.d_private;
|
|
|
|
DEBUGASSERT(meta != NULL && framelist != NULL);
|
|
|
|
/* Add the incoming list of framelist to queue of framelist to loopback */
|
|
|
|
for (iob = framelist; iob != NULL; iob = framelist)
|
|
{
|
|
/* Increment statistics */
|
|
|
|
NETDEV_RXPACKETS(&priv->lo_radio.r_dev);
|
|
|
|
/* Remove the IOB from the queue */
|
|
|
|
framelist = iob->io_flink;
|
|
iob->io_flink = NULL;
|
|
|
|
ninfo("Queuing frame IOB %p\n", iob);
|
|
|
|
/* Just zero the MAC header for test purposes */
|
|
|
|
DEBUGASSERT(iob->io_offset == MAC_HDRLEN);
|
|
memset(iob->io_data, 0, MAC_HDRLEN);
|
|
|
|
/* Add the IOB to the tail of the queue of framelist to be looped back */
|
|
|
|
if (priv->lo_tail == NULL)
|
|
{
|
|
priv->lo_head = iob;
|
|
}
|
|
else
|
|
{
|
|
priv->lo_tail->io_flink = iob;
|
|
}
|
|
|
|
priv->lo_tail = iob;
|
|
}
|
|
|
|
/* Schedule to serialize the poll on the worker thread. */
|
|
|
|
work_queue(LPBKWORK, &priv->lo_work, lo_loopback_work, priv, 0);
|
|
return OK;
|
|
}
|
|
|
|
/****************************************************************************
|
|
* Name: lo_properties
|
|
*
|
|
* Description:
|
|
* Different packet radios may have different properties. If there are
|
|
* multiple packet radios, then those properties have to be queried at
|
|
* run time. This information is provided to the 6LoWPAN network via the
|
|
* following structure.
|
|
*
|
|
* Input Parameters:
|
|
* netdev - The network device to be queried
|
|
* properties - Location where radio properities will be returned.
|
|
*
|
|
* Returned Value:
|
|
* Zero (OK) returned on success; a negated errno value is returned on
|
|
* any failure.
|
|
*
|
|
****************************************************************************/
|
|
|
|
static int lo_properties(FAR struct radio_driver_s *netdev,
|
|
FAR struct radiodev_properties_s *properties)
|
|
{
|
|
DEBUGASSERT(netdev != NULL && properties != NULL);
|
|
memset(properties, 0, sizeof(struct radiodev_properties_s));
|
|
|
|
/* General */
|
|
|
|
properties->sp_addrlen = CONFIG_PKTRADIO_ADDRLEN; /* Length of an address */
|
|
properties->sp_framelen = CONFIG_IOB_BUFSIZE; /* Fixed frame length */
|
|
|
|
/* Multicast address */
|
|
|
|
properties->sp_mcast.nv_addrlen = CONFIG_PKTRADIO_ADDRLEN;
|
|
memset(properties->sp_mcast.nv_addr, 0xee, RADIO_MAX_ADDRLEN);
|
|
|
|
/* Broadcast address */
|
|
|
|
properties->sp_bcast.nv_addrlen = CONFIG_PKTRADIO_ADDRLEN;
|
|
memset(properties->sp_mcast.nv_addr, 0xff, RADIO_MAX_ADDRLEN);
|
|
|
|
#ifdef CONFIG_NET_STARPOINT
|
|
/* Star hub node address */
|
|
|
|
properties->sp_hubnode.nv_addrlen = 1;
|
|
properties->sp_hubnode.nv_addr[0] = CONFIG_SPIRIT_HUBNODE;
|
|
#endif
|
|
|
|
return OK;
|
|
}
|
|
|
|
/****************************************************************************
|
|
* Public Functions
|
|
****************************************************************************/
|
|
|
|
/****************************************************************************
|
|
* Name: pktradio_loopback
|
|
*
|
|
* Description:
|
|
* Initialize and register the Ieee802.15.4 MAC loopback network driver.
|
|
*
|
|
* Input Parameters:
|
|
* None
|
|
*
|
|
* Returned Value:
|
|
* OK on success; Negated errno on failure.
|
|
*
|
|
* Assumptions:
|
|
*
|
|
****************************************************************************/
|
|
|
|
int pktradio_loopback(void)
|
|
{
|
|
FAR struct lo_driver_s *priv;
|
|
FAR struct radio_driver_s *radio;
|
|
FAR struct net_driver_s *dev;
|
|
|
|
ninfo("Initializing\n");
|
|
|
|
/* Get the interface structure associated with this interface number. */
|
|
|
|
priv = &g_loopback;
|
|
|
|
/* Initialize the driver structure */
|
|
|
|
memset(priv, 0, sizeof(struct lo_driver_s));
|
|
|
|
radio = &priv->lo_radio;
|
|
dev = &radio->r_dev;
|
|
dev->d_ifup = lo_ifup; /* I/F up (new IP address) callback */
|
|
dev->d_ifdown = lo_ifdown; /* I/F down callback */
|
|
dev->d_txavail = lo_txavail; /* New TX data callback */
|
|
#ifdef CONFIG_NET_MCASTGROUP
|
|
dev->d_addmac = lo_addmac; /* Add multicast MAC address */
|
|
dev->d_rmmac = lo_rmmac; /* Remove multicast MAC address */
|
|
#endif
|
|
#ifdef CONFIG_NETDEV_IOCTL
|
|
dev->d_ioctl = lo_ioctl; /* Handle network IOCTL commands */
|
|
#endif
|
|
dev->d_private = (FAR void *)priv; /* Used to recover private state from dev */
|
|
|
|
/* Set the network mask and advertise our MAC-based IP address */
|
|
|
|
lo_netmask(dev);
|
|
lo_addr2ip(dev);
|
|
|
|
/* Initialize the Network frame-related callbacks */
|
|
|
|
radio->r_get_mhrlen = lo_get_mhrlen; /* Get MAC header length */
|
|
radio->r_req_data = lo_req_data; /* Enqueue frame for transmission */
|
|
radio->r_properties = lo_properties; /* Returns radio properties */
|
|
|
|
/* Create a watchdog for timing polling for and timing of transmissions */
|
|
|
|
priv->lo_polldog = wd_create(); /* Create periodic poll timer */
|
|
|
|
#ifdef CONFIG_NET_6LOWPAN
|
|
/* Make sure the our single packet buffer is attached. We must do this before
|
|
* registering the device since, once the device is registered, a packet may
|
|
* be attempted to be forwarded and require the buffer.
|
|
*/
|
|
|
|
priv->lo_radio.r_dev.d_buf = g_iobuffer.rb_buf;
|
|
#endif
|
|
|
|
/* Register the loopabck device with the OS so that socket IOCTLs can be
|
|
* performed.
|
|
*/
|
|
|
|
(void)netdev_register(&priv->lo_radio.r_dev, NET_LL_PKTRADIO);
|
|
|
|
/* Put the network in the UP state */
|
|
|
|
dev->d_flags = IFF_UP;
|
|
return lo_ifup(&priv->lo_radio.r_dev);
|
|
}
|
|
|
|
#endif /* CONFIG_PKTRADIO_LOOPBACK */
|