sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
31cddc922c
nuttx/arch/or1k/include/mor1kx/irq.h
anjiahao 9d6c92f0fa arch:move debug.h form headfile to c file 
Signed-off-by: anjiahao <anjiahao@xiaomi.com>
2021-12-07 04:01:27 -08:00

270 lines
8.2 KiB
C
Raw Blame History

/****************************************************************************
* arch/or1k/include/mor1kx/irq.h
*
* Copyright (C) 2018 Extent3D. All rights reserved.
* Author: Matt Thompson <matt@extent3d.com>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/* This file should never be included directly but, rather, only indirectly
* through nuttx/irq.h
*/
#ifndef __ARCH_OR1K_INCLUDE_MOR1KX_IRQ_H
#define __ARCH_OR1K_INCLUDE_MOR1KX_IRQ_H
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <nuttx/irq.h>
#ifndef __ASSEMBLY__
# include <stdint.h>
#endif
#include <arch/spr.h>
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
#define OR1K_NR_EXT_IRQ (32)
#define OR1K_NR_INT_IRQ (1)
#define NR_IRQS (OR1K_NR_EXT_IRQ + OR1K_NR_INT_IRQ)
/* External interrupts are numbered 0-31. These can be used directly
* as bit shift offsets in the programmable interrupt controller register.
*/
#define OR1K_IRQ_EXT0 (0)
#define OR1K_IRQ_EXT1 (1)
#define OR1K_IRQ_EXT2 (2)
#define OR1K_IRQ_EXT3 (3)
#define OR1K_IRQ_EXT4 (4)
#define OR1K_IRQ_EXT5 (5)
#define OR1K_IRQ_EXT6 (6)
#define OR1K_IRQ_EXT7 (7)
#define OR1K_IRQ_EXT8 (8)
#define OR1K_IRQ_EXT9 (9)
#define OR1K_IRQ_EXT10 (10)
#define OR1K_IRQ_EXT11 (11)
#define OR1K_IRQ_EXT12 (12)
#define OR1K_IRQ_EXT13 (13)
#define OR1K_IRQ_EXT14 (14)
#define OR1K_IRQ_EXT15 (15)
#define OR1K_IRQ_EXT16 (16)
#define OR1K_IRQ_EXT17 (17)
#define OR1K_IRQ_EXT18 (18)
#define OR1K_IRQ_EXT19 (19)
#define OR1K_IRQ_EXT20 (20)
#define OR1K_IRQ_EXT21 (21)
#define OR1K_IRQ_EXT22 (22)
#define OR1K_IRQ_EXT23 (23)
#define OR1K_IRQ_EXT24 (24)
#define OR1K_IRQ_EXT25 (25)
#define OR1K_IRQ_EXT26 (26)
#define OR1K_IRQ_EXT27 (27)
#define OR1K_IRQ_EXT28 (28)
#define OR1K_IRQ_EXT29 (29)
#define OR1K_IRQ_EXT30 (30)
#define OR1K_IRQ_EXT31 (31)
/* Internal interrupts are numbered 32-xx */
#define OR1K_IRQ_TICK (32)
/* IRQ Stack Frame Format:
*
* We're going to store [r1..r31], pc and sr
* into a register set for context switches
* and exception handlers.
*
* Note that the PC and SR can be removed once
* context switches are done through syscall exceptions.
*
* We should rely on EPCR[0-15], ESR[0-15] and shadow regs.
*
* Indices into the xcp.regs array:
*/
#define REG_R1 (0)
#define REG_R2 (1)
#define REG_R3 (2)
#define REG_R4 (3)
#define REG_R5 (4)
#define REG_R6 (5)
#define REG_R7 (6)
#define REG_R8 (7)
#define REG_R9 (8)
#define REG_R10 (9)
#define REG_R11 (10)
#define REG_R12 (11)
#define REG_R13 (12)
#define REG_R14 (13)
#define REG_R15 (14)
#define REG_R16 (15)
#define REG_R17 (16)
#define REG_R18 (17)
#define REG_R19 (18)
#define REG_R20 (19)
#define REG_R21 (20)
#define REG_R22 (21)
#define REG_R23 (22)
#define REG_R24 (23)
#define REG_R25 (24)
#define REG_R26 (25)
#define REG_R27 (26)
#define REG_R28 (27)
#define REG_R29 (28)
#define REG_R30 (29)
#define REG_R31 (30)
#define REG_PC (31)
#define REG_SR (32)
#define XCPTCONTEXT_REGS (33)
#define XCPTCONTEXT_SIZE (4 * XCPTCONTEXT_REGS)
/****************************************************************************
* Public Types
****************************************************************************/
/* The exception context structure defines how state is stored
* for interrupt handlers and context switches
*
* All general purpose registers, the re-entry point (PC), and SR
* are stored in the regs array.
*/
#ifndef __ASSEMBLY__
struct xcptcontext
{
/* Register save area */
uint32_t regs[XCPTCONTEXT_REGS];
/* The following function pointer is non-zero if there
* are pending signals to be processed.
*/
void *sigdeliver; /* Actual type is sig_deliver_t */
/* These are saved copies of LR and CPSR used during
* signal processing.
*
* REVISIT: Because there is only one copy of these save areas,
* only a single signal handler can be active. This precludes
* queuing of signal actions. As a result, signals received while
* another signal handler is executing will be ignored!
*/
uint32_t saved_pc;
uint32_t saved_flags;
};
#endif
/****************************************************************************
* Inline functions
****************************************************************************/
#ifndef __ASSEMBLY__
/* Name: up_irq_save, up_irq_restore, and friends.
*
* NOTE: This function should never be called from application code and,
* as a general rule unless you really know what you are doing, this
* function should not be called directly from operating system code either:
* Typically, the wrapper functions, enter_critical_section() and
* leave_critical section(), are probably what you really want.
*/
/* Save the current interrupt enable state & disable IRQs. */
static inline irqstate_t up_irq_save(void)
{
irqstate_t flags;
irqstate_t x;
mfspr(SPR_SYS_SR, flags);
/* Disable IRQs */
x = flags & ~(SPR_SR_IEE | SPR_SR_TEE);
mtspr(SPR_SYS_SR, x);
return flags;
}
/* Restore saved state */
static inline void up_irq_restore(irqstate_t flags)
{
uint32_t x;
mfspr(SPR_SYS_SR, x);
x |= flags & (SPR_SR_IEE | SPR_SR_TEE);
mtspr(SPR_SYS_SR, x);
}
/* Enable IRQs */
static inline void up_irq_enable(void) inline_function;
static inline void up_irq_enable(void)
{
irqstate_t flags;
mfspr(SPR_SYS_SR, flags);
flags |= (SPR_SR_IEE | SPR_SR_TEE);
mtspr(SPR_SYS_SR, flags);
}
#endif /* __ASSEMBLY__ */
/****************************************************************************
* Public Data
****************************************************************************/
/****************************************************************************
* Public Function Prototypes
****************************************************************************/
#ifndef __ASSEMBLY__
#ifdef __cplusplus
#define EXTERN extern "C"
extern "C"
{
#else
#define EXTERN extern
#endif
#undef EXTERN
#ifdef __cplusplus
}
#endif
#endif
#endif /* __ARCH_OR1K_INCLUDE_MOR1KX_IRQ_H */
Reference in New Issue View Git Blame Copy Permalink