sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
325a5804f1
nuttx/drivers/sensors
History
Juha Niskanen dafa72edc3 drivers/sensors: add support to MAX44009 ambient light sensor
2018-01-29 07:56:06 -06:00
..
adxl345_base.c Adds new OS internal functions nxsig_sleep() and nxsig_usleep. These differ from the standard sleep() and usleep() in that (1) they don't cause cancellation points, and (2) don't set the errno variable (if applicable). All calls to sleep() and usleep() changed to calls to nxsig_sleep() and nxsig_usleep(). 2017-10-06 10:15:01 -06:00
adxl345_i2c.c Add _ to the beginning of all debug macros to avoid name collisions 2016-06-16 12:33:32 -06:00
adxl345_spi.c Add an instance argument to the SPIDEV definitions. 2017-04-29 12:26:52 -06:00
adxl345.h Remove I2C slave methods from I2C master interface; rename i2c_dev_s to i2c_master_s. 2016-01-30 08:36:47 -06:00
apds9960.c drivers/sensors/apds9960.c: Use work_queue to read/process data when receive an IRQ 2017-10-20 08:54:44 -06:00
as5048b.c drivers/sensors: Fix more naming of configurations to be compliant for two more drivers. Still a few more to go. 2017-08-24 10:26:53 -06:00
bh1750fvi.c drivrs/sensors: Make a few other configuration settings consistent with the (undocumented) standard. 2017-08-24 09:45:46 -06:00
bmg160.c Squashed commit of the following: 2017-10-04 15:22:27 -06:00
bmp180.c Adds new OS internal functions nxsig_sleep() and nxsig_usleep. These differ from the standard sleep() and usleep() in that (1) they don't cause cancellation points, and (2) don't set the errno variable (if applicable). All calls to sleep() and usleep() changed to calls to nxsig_sleep() and nxsig_usleep(). 2017-10-06 10:15:01 -06:00
hc_sr04.c Adds new OS internal functions nxsig_sleep() and nxsig_usleep. These differ from the standard sleep() and usleep() in that (1) they don't cause cancellation points, and (2) don't set the errno variable (if applicable). All calls to sleep() and usleep() changed to calls to nxsig_sleep() and nxsig_usleep(). 2017-10-06 10:15:01 -06:00
hts221.c drivers/sensors/hts221.c: Fix sensor reset with BOOT bit 2017-12-20 10:11:52 -06:00
ina219.c The INA219 is a combined voltage and current sensor that can measure up to 26 volts and a current that depends on an external shunt resistor. Connection happens via i2c/smbus and the chip features a power supply rail that is independent from the measured voltage, so it can measure low voltages. 2017-10-10 17:03:56 -06:00
Kconfig drivers/sensors: add support to MAX44009 ambient light sensor 2018-01-29 07:56:06 -06:00
kxtj9.c Adds new OS internal functions nxsig_sleep() and nxsig_usleep. These differ from the standard sleep() and usleep() in that (1) they don't cause cancellation points, and (2) don't set the errno variable (if applicable). All calls to sleep() and usleep() changed to calls to nxsig_sleep() and nxsig_usleep(). 2017-10-06 10:15:01 -06:00
l3gd20.c Squashed commit of the following: 2017-10-04 15:22:27 -06:00
lis2dh.c sensors/lis2dh: fix use of obsolete dbg macro 2017-10-27 06:13:14 -06:00
lis3dsh.c Squashed commit of the following: 2017-10-04 15:22:27 -06:00
lis3mdl.c Squashed commit of the following: 2017-10-04 15:22:27 -06:00
lis331dl.c Squashed commit of the following: 2017-09-30 12:59:33 -06:00
lm75.c drivers/sensors: Fix more naming of configurations to be compliant for two more drivers. Still a few more to go. 2017-08-24 10:10:00 -06:00
lm92.c drivers/sensors: Fix more naming of configurations to be compliant for two more drivers. Still a few more to go. 2017-08-24 10:10:00 -06:00
lps25h.c sched/semaphore: sem_timedwait() is a cancellation point and, hence, cannot be called from within the OS. Created nxsem_timedwait() that is equivalent but does not modify the errno and does not cause cancellation. All calls to sem_timedwait() change to calls to nxsem_timedwait() in the OS. 2017-10-05 07:24:54 -06:00
lsm9ds1.c drivers/sensors: Fix remaining naming of configurations to be compliant for two more drivers. 2017-08-24 10:48:20 -06:00
ltc4151.c drivers/sensors: Fix remaining naming of configurations to be compliant for two more drivers. 2017-08-24 10:48:20 -06:00
Make.defs drivers/sensors: add support to MAX44009 ambient light sensor 2018-01-29 07:56:06 -06:00
max6675.c drivers/sensors: Fix more naming of configurations to be compliant for two more drivers. Still a few more to go. 2017-08-24 10:10:00 -06:00
max31855.c drivers/sensors: Fix more naming of configurations to be compliant for two more drivers. Still a few more to go. 2017-08-24 10:10:00 -06:00
max44009.c drivers/sensors: add support to MAX44009 ambient light sensor 2018-01-29 07:56:06 -06:00
mb7040.c drivers/sensors: Fix remaining naming of configurations to be compliant for two more drivers. 2017-08-24 10:48:20 -06:00
mcp9844.c drivers/sensors: Fix remaining naming of configurations to be compliant for two more drivers. 2017-08-24 10:48:20 -06:00
mlx90393.c Squashed commit of the following: 2017-10-04 15:22:27 -06:00
mpl115a.c Adds new OS internal functions nxsig_sleep() and nxsig_usleep. These differ from the standard sleep() and usleep() in that (1) they don't cause cancellation points, and (2) don't set the errno variable (if applicable). All calls to sleep() and usleep() changed to calls to nxsig_sleep() and nxsig_usleep(). 2017-10-06 10:15:01 -06:00
ms58xx.c drivers/sensors: Fix remaining naming of configurations to be compliant for two more drivers. 2017-08-24 10:48:20 -06:00
qencoder.c Squashed commit of the following: 2017-10-04 15:22:27 -06:00
README.txt
veml6070.c Adds new OS internal functions nxsig_sleep() and nxsig_usleep. These differ from the standard sleep() and usleep() in that (1) they don't cause cancellation points, and (2) don't set the errno variable (if applicable). All calls to sleep() and usleep() changed to calls to nxsig_sleep() and nxsig_usleep(). 2017-10-06 10:15:01 -06:00
xen1210.c Squashed commit of the following: 2017-10-04 15:22:27 -06:00
xen1210.h drivers/sensors: Fix more naming of configurations to be compliant for two more drivers. Still a few more to go. 2017-08-24 10:26:53 -06:00
zerocross.c Squashed commit of the following: 2017-10-07 10:57:09 -06:00

README.txt 

ADXL345
=======

The ADXL345 accelerometer can operate in I2C or SPI mode. To operate in I2C
mode just connect the CS pin to Vddi/o.

In order to operate in SPI mode CS need to use connected to microcontroller,
it cannot leave unconnected.

In SPI mode it works with clock polarity (CPOL) = 1 and clock phase (CPHA) = 1.

MPL115A
=======

This driver has support only for MPL115A1 (SPI), but support to MPL115A2 (I2C) can
be added easily.