nuttx

History

Alin Jerpelea f8aed9864d NuttX: Max Holtzberg: update licenses to Apache Max Holtzberg has submitted the ICLA and we can migrate the licenses to Apache. Gregory Nutt has submitted the SGA and we can migrate the licenses to Apache. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>		2021-04-01 12:13:12 -05:00
..
configs/nsh	fs: delete NFILE_DESCRIPTORS for allocating dynamically	2021-03-17 06:46:42 -07:00
include	boards: nxstyle fixes	2021-03-20 19:22:58 -07:00
scripts	board: stm32: Author Gregory Nutt: update licenses to Apache	2021-03-20 19:22:58 -07:00
src	NuttX: Max Holtzberg: update licenses to Apache	2021-04-01 12:13:12 -05:00
Kconfig
README.txt	Run codespell -w against all files	2020-02-22 14:45:07 -06:00

README.txt

README
======

The NuttX configuration for the Olimex STM32-P207 is assembled mainly
from the configurations stm32f4discovery and stm3240g-eval.

It was tested with the NuttX EABI "buildroot" Toolchain.

Debugging with OpenOCD via an Olimex ARM-USB-TINY-H works. Note that
CONFIG_DEBUG_SYMBOLS and CONFIG_STM32_DISABLE_IDLE_SLEEP_DURING_DEBUG
are enabled so that the JTAG connection is not disconnected by the idle
loop.

The following peripherals are enabled in this configuration.

 - LEDs:       show the system status

 - Buttons:    TAMPER-button, WKUP-button, J1-Joystick (consists of RIGHT-,
               UP-, LEFT-, DOWN-, and CENTER-button). Built in app
               'buttons' works.

 - ADC:        ADC1 samples the red trim potentiometer AN_TR
               Built in app 'adc' works.

 - USB-FS-OTG: Enabled but not really tested, since there is only a
               USB-A-connector (host) connected to the full speed STM32
               inputs.

 - USB-HS_OTG: The other connector (device) is connected to the high speed
               STM32 inputs (not enabled).

 - CAN:        Built in app 'can' works, but apart from that not really tested.

 - Ethernet:   Ping to other station on the network works.