Gregory Nutt 35dfe25430 Remove BOARDIOC_CAN_INITIALIZE. CAN initialization is now done in the board initialization logic just like every other device driver.

2016-12-06 08:51:37 -06:00

..

.gitignore

Olimex-STM32-H407: Pick up a few changes from PR38. Most of those changes are, however, not appropriate or not incompliance with NuttX naming or coding style.

2016-04-05 08:04:52 -06:00

Makefile

Olimex STM32 H407: Add basic infrastructure for MMC/Sd support

2016-04-05 17:15:50 -06:00

olimex-stm32-h407.h

Remove BOARDIOC_CAN_INITIALIZE. CAN initialization is now done in the board initialization logic just like every other device driver.

2016-12-06 08:51:37 -06:00

stm32_adc.c

Remove all references to board_adc_setup()

2016-12-05 17:06:08 -06:00

stm32_appinit.c

Remove BOARDIOC_CAN_INITIALIZE. CAN initialization is now done in the board initialization logic just like every other device driver.

2016-12-06 08:51:37 -06:00

stm32_autoleds.c

Centralize definitions associated with CONFIG_DEBUG_LEDS

2016-06-15 14:12:19 -06:00

stm32_boot.c

Olimex-STM32_H407: Move board initialization logic from stm32_appinit.c to stm32_bringup.c; Add support for the RTC driver

2016-04-05 09:17:54 -06:00

stm32_bringup.c

Remove BOARDIOC_CAN_INITIALIZE. CAN initialization is now done in the board initialization logic just like every other device driver.

2016-12-06 08:51:37 -06:00

stm32_buttons.c

Trivial changes from review of last PR

2016-06-27 08:00:01 -06:00

stm32_can.c

Remove BOARDIOC_CAN_INITIALIZE. CAN initialization is now done in the board initialization logic just like every other device driver.

2016-12-06 08:51:37 -06:00

stm32_sdio.c

configs/: Change some *err() message to *info() messages if what was a *dbg() message does not indicate and error condition.

2016-06-13 08:45:54 -06:00

stm32_usb.c

Without lowsyslog() *llinfo() is not useful. Eliminate and replace with *info().

2016-06-20 11:59:15 -06:00

stm32_userleds.c

Centralize definitions associated with CONFIG_DEBUG_LEDS

2016-06-15 14:12:19 -06:00