nuttx/arch/arm/src/samd5e5/sam_eic.h

123 lines
3.9 KiB
C

/****************************************************************************
* arch/arm/src/samd5e5/sam_eic.h
*
* Copyright (C) 2018 Gregory Nutt. All rights reserved.
* Author: Matt Thompson <matt@extent3d.com>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
#ifndef __ARCH_ARM_SRC_SAMD5E5_SAM_EIC_H
#define __ARCH_ARM_SRC_SAMD5E5_SAM_EIC_H
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <stdint.h>
#include <stdbool.h>
#include "sam_config.h"
#include "sam_port.h"
#include "chip/sam_eic.h"
#ifdef CONFIG_SAMD5E5_EIC
/****************************************************************************
* Public Function Prototypes
****************************************************************************/
#undef EXTERN
#if defined(__cplusplus)
#define EXTERN extern "C"
extern "C"
{
#else
#define EXTERN extern
#endif
/****************************************************************************
* Name: sam_eic_initialize
*
* Description:
* Initialize the EIC. Called one timer during system bring-up.
*
* Input Parameters:
* None
*
* Returned Value:
* None
*
****************************************************************************/
int sam_eic_initialize(void);
/****************************************************************************
* Name: sam_eic_configure
*
* Description:
* Configure the interrupt edge sensitivity in CONFIGn register of the
* EIC. The interrupt will be enabled at the EIC (but not at the NVIC).
*
* Input Parameters:
* eirq - Pin to be configured (0..15)
* pinset - Configuration of the pin
*
* Returned Value:
* None
*
****************************************************************************/
int sam_eic_configure(uint8_t eirq, port_pinset_t pinset);
/****************************************************************************
* Name: sam_eic_irq_ack
*
* Description:
* Acknowledge receipt of an external interrupt.
*
* Input Parameters:
* irq - SAM_IRQ_EXTINTn IRQ to be acknowledged, n=0-15
*
* Returned Value:
* None
*
****************************************************************************/
int sam_eic_irq_ack(int irq);
#undef EXTERN
#if defined(__cplusplus)
}
#endif
#endif /* CONFIG_SAMD5E5_EIC */
#endif /* __ARCH_ARM_SRC_SAMD5E5_SAM_EIC_H */