165 lines
3.7 KiB
ReStructuredText
165 lines
3.7 KiB
ReStructuredText
=================
|
|
Nordic nRF5340 DK
|
|
=================
|
|
|
|
The `nRF5340-DK (PCA10092) <https://www.nordicsemi.com/Products/Development-hardware/nrf5340-dk>`_
|
|
is a development board based on the nRF5340 from Nordic.
|
|
|
|
Serial Console
|
|
==============
|
|
|
|
Serial console for the application core:
|
|
|
|
===== ============ =============
|
|
Pin Signal Notes
|
|
===== ============ =============
|
|
P1.01 APP UART0 TX virtual COM 0
|
|
P1.00 APP UART0 RX virtual COM 0
|
|
===== ============ =============
|
|
|
|
Serial console for the network core:
|
|
|
|
===== ============ =============
|
|
Pin Signal Notes
|
|
===== ============ =============
|
|
P0.20 NET UART0 TX virtual COM 1
|
|
P0.22 NET UART0 RX virtual COM 1
|
|
===== ============ =============
|
|
|
|
LEDs and Buttons
|
|
================
|
|
|
|
LEDs
|
|
----
|
|
The PCA10092 has 4 user-controllable LEDs:
|
|
|
|
==== =======
|
|
LED MCU
|
|
==== =======
|
|
LED1 P0.28
|
|
LED2 P0.29
|
|
LED3 P0.30
|
|
LED4 P0.31
|
|
==== =======
|
|
|
|
A low output illuminates the LED.
|
|
|
|
CONFIG_ARCH_LEDS
|
|
----------------
|
|
|
|
If CONFIG_ARCH_LEDS is not defined, then the LEDs are completely under
|
|
control of the application. The following interfaces are then available
|
|
for application control of the LEDs::
|
|
|
|
uint32_t board_userled_initialize(void);
|
|
void board_userled(int led, bool ledon);
|
|
void board_userled_all(uint32_t ledset);
|
|
|
|
Pushbuttons
|
|
-----------
|
|
|
|
======= =======
|
|
BUTTON MCU
|
|
======= =======
|
|
BUTTON1 P0.23
|
|
BUTTON2 P0.24
|
|
BUTTON3 P0.08
|
|
BUTTON4 P0.09
|
|
======= =======
|
|
|
|
Configurations
|
|
==============
|
|
|
|
Each configuration is maintained in a sub-directory and can be selected as
|
|
follow::
|
|
|
|
tools/configure.sh nrf5340-dk:<subdir>
|
|
|
|
Where <subdir> is one of the following:
|
|
|
|
adc_cpuapp
|
|
----------
|
|
|
|
This configuration shows the use of the ADC peripheral.
|
|
|
|
composite_cpuapp
|
|
----------------
|
|
|
|
NuttShell configuration for the application core with support for CDC/ACM with
|
|
RNDIS composite driver.
|
|
|
|
nsh_cpuapp
|
|
----------
|
|
|
|
Basic NuttShell configuration for the application core (console enabled in UART0,
|
|
exposed via J-Link VCOM0, at 115200 bps).
|
|
|
|
nsh_cpunet
|
|
----------
|
|
|
|
Basic NuttShell configuration for the network core (console enabled in UART0,
|
|
exposed via J-Link VCOM1, at 115200 bps).
|
|
|
|
ostest_tickless_cpuapp
|
|
----------------------
|
|
|
|
This is a NSH configuration that includes ``apps/testing/ostest`` as a builtin
|
|
and enable support for the tick-less OS.
|
|
|
|
pwm_cpuapp
|
|
----------
|
|
|
|
This configuration shows the use of the PWM peripheral.
|
|
|
|
qspi_cpuapp
|
|
-----------
|
|
|
|
NuttShell configuration with enabled support for on-board MX25R QSPI memory.
|
|
|
|
rpmsghci_bt_cpuapp
|
|
------------------
|
|
|
|
This configuration enables RPMSG Bluetooth HCI client on the application core
|
|
and uses NuttX BLE stack for the host-layer
|
|
|
|
rpmsghci_nimble_cpuapp
|
|
----------------------
|
|
|
|
This configuration enables RPMSG Bluetooth HCI client on the application core
|
|
and uses nimBLE for the host-layer
|
|
|
|
rpmsghci_sdc_cpunet
|
|
-------------------
|
|
|
|
This configuration enables RPMSG Bluetooth HCI server on the network core which
|
|
can be accessed using RPMSG Bluetooth HCI client on the application core.
|
|
|
|
rptun_cpuapp
|
|
------------
|
|
|
|
This configuration enables basic RPTUN support on the application core.
|
|
The ``rptun`` command will be available from NSH.
|
|
|
|
rptun_cpunet
|
|
------------
|
|
|
|
This configuration enables basic RPTUN support on the network core.
|
|
The ``rptun`` command will be available from NSH.
|
|
|
|
sdc_cpunet
|
|
----------
|
|
|
|
Enables Nordic's SoftDevice controller on the network core and uses NuttX BLE stack for the host-layer.
|
|
The ``btsak`` application is included as a builtin.
|
|
|
|
sdc_nimble_cpunet
|
|
-----------------
|
|
|
|
Enables Nordic's SoftDevice controller on the network core and uses nimBLE for the host-layer.
|
|
The ``nimble`` test application can be used to enable a simple GATT server.
|
|
|
|
timer_cpuapp
|
|
------------
|
|
|
|
This configuration shows the use of the TIMER peripheral.
|